Introducere
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your InSinkErator Instant Hot Water Tank, Model HWT-00. Please read all instructions carefully before use.
The InSinkErator HWT-00 Instant Hot Water Tank is designed to provide near-boiling water (approximately 200 degrees F inside the tank) directly at your kitchen sink. This 2/3-gallon stainless steel tank features an easily adjustable thermostat and a 750-watt heating element for quick and convenient hot water access.
Informații importante privind siguranța
AVERTISMENT: Acest produs vă poate expune la substanțe chimice, inclusiv plumbul, despre care statul California este cunoscut că cauzează cancer și malformații congenitale sau alte vătămări ale reproducerii. Pentru mai multe informații accesați www.P65Warnings.ca.gov.
Respectați întotdeauna măsurile de siguranță de bază atunci când utilizați aparate electrice pentru a reduce riscul de incendiu, electrocutare și vătămare corporală.
- Citiți toate instrucțiunile înainte de a utiliza aparatul.
- Nu atingeți suprafețele fierbinți. Folosiți mânere sau butoane.
- Pentru a vă proteja împotriva șocurilor electrice, nu scufundați cablul, ștecherele sau aparatul în apă sau alt lichid.
- Este necesară supravegherea atentă atunci când orice aparat este folosit de copii sau în apropierea acestora.
- Deconectați de la priză atunci când nu este utilizat și înainte de curățare. Lăsați să se răcească înainte de a pune sau a scoate piesele.
- Nu utilizați niciun aparat cu un cablu sau un ștecher deteriorat sau după ce aparatul funcționează defectuos sau a fost deteriorat în vreun fel. Returnați aparatul la cel mai apropiat centru de service autorizat pentru examinare, reparare sau reglare.
- Utilizarea accesoriilor nerecomandate de producătorul aparatului poate provoca răni.
- Nu utilizați în aer liber.
- Nu lăsați cablul să atârne peste marginea mesei sau a blatului și nu atingeți suprafețele fierbinți.
- Nu așezați pe sau lângă un arzător electric sau cu gaz fierbinte sau într-un cuptor încălzit.
- Conectați întotdeauna mai întâi ștecherul la aparat, apoi conectați cablul la priza de perete. Pentru a deconecta, rotiți orice control în poziția „oprit”, apoi scoateți ștecherul din priză.
- Nu utilizați aparatul pentru alte utilizări decât cele prevăzute.
Ce este în cutie
Your InSinkErator Instant Hot Water Tank package includes:
- 2/3-Gallon Stainless Steel Instant Hot Water Tank (HWT-00)
Note: Faucet and water filtration system are sold separately.
Configurare și instalare
The InSinkErator HWT-00 is designed for easy DIY installation under your sink. Ensure you have a standard under-sink outlet available for the tank's power cord.
Pașii de instalare s-au terminatview:
- Pregătiți zona: Clear the under-sink cabinet space. Ensure access to cold water supply and a grounded electrical outlet.
- Montați rezervorul: Securely mount the tank in an upright position within the under-sink cabinet. The tank features tool-free connections for convenience.
- Conectați conductele de apă: Connect the cold water supply line to the tank's inlet. Connect the hot water outlet from the tank to your instant hot water faucet (sold separately). Ensure all connections are secure to prevent leaks.
- Instalați robinetul (dacă este cazul): If installing a new faucet, follow the faucet's specific instructions. The HWT-00 is compatible with all InSinkErator instant hot water faucets.
- Conectare alimentare: Once all water connections are secure and the tank is filled with water, plug the tank's power cord into the standard under-sink outlet. The unit includes dry start protection.
- Spălați sistemul: Before first use, flush the system according to the faucet's instructions to remove any air and ensure proper operation.
Visual Guide: Installation Components
Image: The InSinkErator HWT-00 Instant Hot Water Tank, showcasing its compact design suitable for under-sink installation.
Image: A close-up of the InSinkErator HWT-00 tank, highlighting its adjustable temperature dial for precise heat control.
Instrucțiuni de operare
Your InSinkErator HWT-00 Instant Hot Water Tank is designed for simple operation, providing near-boiling water on demand.
Reglarea temperaturii:
- The tank features an easily adjustable thermostat. Locate the temperature control knob on the front of the tank.
- Turn the knob to adjust the desired water temperature. The manufacturer's recommended setpoint is approximately 200 degrees F for optimum performance.
- Allow a few minutes for the water to reach the newly set temperature after adjustment.
Distribuirea apei calde:
- To dispense hot water, activate your compatible InSinkErator instant hot water faucet (sold separately) according to its specific operating instructions.
- The tank will continuously supply near-boiling water as long as the faucet is activated, up to its 2/3-gallon capacity.
Utilizare Examples:
Image: A person filling a teapot with hot water from an instant hot water faucet, demonstrating its use for hot beverages.
Image: A person preparing a baby bottle with hot water from an instant hot water faucet, highlighting its convenience for quick tasks.
Image: A person filling a cooking pot with hot water from an instant hot water faucet, illustrating its use for accelerating cooking processes.
Image: A person cleaning a bowl with hot water from an instant hot water faucet, showing its utility for cleaning and sanitizing.
Întreţinere
Proper maintenance ensures the longevity and optimal performance of your InSinkErator Instant Hot Water Tank.
Water Filter Compatibility:
- The HWT-00 tank is compatible with InSinkErator under-sink water filtration systems (sold separately).
- Using a compatible filter can help reduce contaminants like PFOA/PFOS, herbicides, pesticides, VOCs, lead, mercury, asbestos, chlorine, and more, improving water taste and quality.
- Refer to your filter system's instructions for recommended replacement schedules, typically every 6 months.
Depanare
If you encounter issues with your InSinkErator Instant Hot Water Tank, please refer to the following common troubleshooting tips:
- Fără apă fierbinte:
- Verificați dacă unitatea este conectată la o priză electrică funcțională.
- Ensure the temperature control knob is set to a desired hot temperature.
- Verify that the water supply valve to the tank is fully open.
- Allow sufficient time for the tank to heat water, especially after initial setup or if the tank was recently drained.
- Apa nu este suficient de fierbinte:
- Adjust the temperature control knob to a higher setting.
- Ensure the tank is not being overused, which might temporarily reduce water temperature.
- Scurgere:
- Check all water connections for tightness. Ensure they are hand-tightened and then given an additional quarter turn with a wrench.
- Inspect hoses for any visible damage or kinks.
- If a filter is installed, ensure it is correctly seated and not leaking.
- Debit lent al apei:
- If a water filter is installed, it might be clogged and require replacement.
- Check the water supply valve for full opening.
If problems persist, please contact InSinkErator customer support for assistance.
Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | InSinkErator |
| Numărul de model | HWT-00 |
| Dimensiunile produsului | 6.75 cm lățime x 10.88 cm înălțime |
| Capacitate | 2/3 Gallon (0.67 Gallons) |
| Material | Rezervor din oțel inoxidabil |
| Wattage | 750 wați |
| Voltage | 115 volți |
| Temperatura maxima | 210 de grade Fahrenheit |
| Tip de montare | Internal (under-sink) |
| Caracteristica specială | Adjustable Temperature, Dry Start Protection, Filter Compatible |
| Greutatea articolului | 5.7 lire sterline |
Garanție și suport
Your InSinkErator Instant Hot Water Tank is backed by a 3-Year "We Come to You" Limited Warranty. For full details, please refer to the product warranty documentation included with your purchase or visit the official InSinkErator website-ul.
For technical support, troubleshooting assistance, or warranty claims, please contact InSinkErator customer service.
