1. Introducere
The StarTech.com BOX4HDECP is a conference table connectivity pop-up box designed to integrate various audio/video and data ports into a conference room table. This device allows users to connect a VGA, Mini DisplayPort, HDMI, or composite video source to an HDMI display, providing a centralized and concealed connectivity solution. It automatically converts any attached audio/video source device into a single HDMI output.
Caracteristicile cheie includ:
- Support for HDMI, VGA, Mini DisplayPort (mDP), and composite video inputs.
- Automatic conversion of input signals to a single HDMI output.
- Integrated USB charging port for mobile devices.
- Ethernet (RJ45) pass-through port for network connectivity.
- Concealed, in-table design with a hideaway panel for a clean aesthetic.
2. Conținutul pachetului
Verificați dacă pachetul dvs. conține următoarele articole:
- 1x StarTech.com BOX4HDECP Conference Table Connectivity Box
- 1x Universal Power Adapter (NA/EU/UK)
- Mounting hardware (screws, clamps)
- Manual de instrucțiuni (acest document)
Figure 2.1: Package Contents. This image displays the main unit, power adapter with various regional plugs, mounting clamps, and the printed instruction manual.
3. Instalare și configurare
Proper installation is crucial for the functionality and aesthetics of the BOX4HDECP. This device is designed for in-table mounting.
3.1 Pregătirea amplasamentului
- Ensure the chosen location on the conference table has sufficient clearance beneath for the device and cable routing.
- Measure and mark the cutout area on the table surface according to the dimensions provided in the product specifications or the included template. A typical cutout size is approximately 6.7 inches (17 cm) in length and 3.9 inches (10 cm) in width.
- Carefully cut the opening in the table using appropriate tools. Ensure clean edges.
3.2 Montarea dispozitivului
- Insert the BOX4HDECP unit into the prepared cutout from the top of the table.
- From underneath the table, secure the unit using the provided mounting clamps and screws. Tighten the screws until the unit is firmly seated and flush with the table surface.
Figure 3.1: Installed Unit in a Conference Table. This image illustrates the connectivity box seamlessly integrated into a table, with various cables connected.
3.3 Conexiuni prin cablu
- Conexiune de alimentare: Connect the universal power adapter to the DC 12V input port on the rear of the BOX4HDECP. Plug the adapter into a suitable power outlet.
- Ieșire HDMI: Connect an HDMI cable from the HDMI Out port on the rear of the BOX4HDECP to your display device (e.g., projector, monitor).
- Ethernet Pass-through: If network connectivity is desired, connect an Ethernet cable from your network source to the Ethernet port on the rear of the BOX4HDECP.
Figure 3.2: Rear Panel Connections. This image highlights the Ethernet, HDMI Out, and DC 12V power input ports.
Figure 3.3: Typical Conference Room Setup. This diagram shows how to connect a source device to the connectivity box and then to a display.
4. Instrucțiuni de utilizare
The BOX4HDECP is designed for ease of use in a conference environment.
4.1 Accessing Ports
To access the input ports, gently press the top panel of the unit. The panel will pop up, revealing the various connectivity options.
Figure 4.1: Top Panel with Input Ports. This image shows the available input connections when the lid is open.
4.2 Connecting Source Devices
Connect your laptop or mobile device to the appropriate input port:
- HDMI: Use the HDMI In port for devices with HDMI output.
- VGA: Use the VGA port for devices with VGA output, along with the 3.5mm audio input for sound.
- Mini DisplayPort (mDP): Use the Mini DP In port for devices with mDP output.
- Video compozit: Use the Video (yellow RCA) and Audio-L/R (white/red RCA) ports for composite video sources.
- Încărcare USB: Connect your mobile device to the USB Charge port for power.
- Ethernet: Connect your device to the Ethernet port for wired network access.
The BOX4HDECP automatically detects the most recently connected video source and outputs it to the connected HDMI display. No manual switching is required.
4.3 Concealing Ports
When not in use, gently push down the top panel until it clicks into place, concealing the ports within the table for a tidy appearance.
5. Întreținere
To ensure the longevity and proper functioning of your BOX4HDECP, follow these maintenance guidelines:
- curatenie: Use a soft, dry cloth to clean the exterior surfaces. Avoid abrasive cleaners or solvents.
- Îndepărtarea prafului: Periodically inspect the ports for dust accumulation. Use compressed air to gently clear any debris.
- Organizare de cabluri: Ensure that cables connected to the unit are not excessively strained or bent, which can lead to damage.
- Conditii de mediu: Operate the device within its specified temperature and humidity ranges to prevent damage.
6. Depanare
If you encounter issues with your BOX4HDECP, refer to the following troubleshooting steps:
- Fără ieșire video:
- Asigurați-vă că adaptorul de alimentare este conectat corect la unitate și la o priză funcțională.
- Verify that the HDMI output cable is securely connected to both the BOX4HDECP and the display device.
- Check the input source cable (HDMI, VGA, mDP, Composite) is firmly connected to the BOX4HDECP and the source device.
- Confirmați că dispozitivul de afișare este setat la intrarea HDMI corectă.
- Try connecting a different source device or cable to isolate the problem.
- Fără ieșire audio:
- If using VGA or Composite inputs, ensure the 3.5mm audio or RCA audio cables are correctly connected.
- Verificați setările audio de pe dispozitivul sursă și de pe ecran.
- Verify the volume levels on both the source and display.
- Încărcarea prin USB nu funcționează:
- Ensure the BOX4HDECP is powered on.
- Try a different USB cable or device to confirm the issue is not with the cable or device.
- Probleme de conectivitate Ethernet:
- Verify that the Ethernet cable is securely connected to both the BOX4HDECP and your network source.
- Check network settings on your connected device.
- Confirm the network source is active and functioning.
- Unit Not Popping Up/Down Smoothly:
- Asigurați-vă că nu există obstacole care împiedică mecanismul să se miște liber.
- Check for any debris around the edges of the pop-up panel.
If these steps do not resolve the issue, please contact StarTech.com technical support.
7. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | BOX4HDECP |
| Porturi de intrare | 1x HDMI In, 1x VGA In, 1x Mini DisplayPort In, 1x Composite Video In (RCA), 1x 3.5mm Audio In (for VGA/Composite), 1x USB Charge, 1x RJ45 Ethernet Pass-through |
| Porturi de ieșire | 1x HDMI Out, 1x RJ45 Ethernet Pass-through |
| Rezoluții acceptate | Up to 1080p (1920x1080) |
| Dimensiuni produs (L x l x H) | 9.06 x 6.3 x 7.09 inchi (23 x 16 x 18 cm) |
| Greutatea articolului | 3.66 lire (1.66 kg) |
| Culoare | Negru & Argintiu |
| Alimentare electrică | DC 12V (Universal Power Adapter included) |
8. Garanție și asistență
The StarTech.com BOX4HDECP is backed by a StarTech.com warranty (details available on the official website) and free lifetime technical support.
Pentru asistență tehnică, vizitați Asistență StarTech.com website-ul or contact their technical support team directly.
