1. Produs terminatview
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.
Figura 1: Față view of the Progress Lighting P6064-31 Wall Lantern.
2. Informații de siguranță
AVERTIZARE: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Nu depășiți puterea maximătage specificat pentru bec.
- Manipulați componentele din sticlă cu grijă pentru a preveni spargerea acestora.
- Țineți materialele inflamabile departe de corpul de iluminat.
3. Conținutul pachetului
Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:
- Wall Lantern Fixture (P6064-31)
- Etched Glass Shade
- Kit hardware de montare
- Foaie de instalare
4. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | P6064-31 |
| Marca | Iluminare progres |
| Tip de finisare | Finished (Black) |
| Dimensiunile produsului | 16.13 cm L x 9.25 cm l x 6.13 cm Î |
| Greutatea articolului | 4.63 lire sterline |
| Tip de montare | Ieșind |
| Nivel de rezistență la apă | Rezistent la apă |
| Sursă de lumină Wattage | 100 wați (maximum) |
| Voltage | 120 volți |
| Putere luminoasă maximă | 1600 lumeni |
| Tip sursă de lumină | Incandescent (Medium Base) |
| Material | Aluminiu |
Figure 2: Product dimensions for the P6064-31 Wall Lantern.
5. Instrucțiuni de instalare
5.1 Preinstalare
- Opriți alimentarea la întrerupătorul de circuit sau la cutia de siguranțe.
- Carefully unpack the fixture and inspect for any damage.
- Asigurați-vă că sunt prezente toate piesele enumerate în Secțiunea 3.
5.2 Sizing and Placement Guidance
Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.
Video: Outdoor Lighting - Sizing and Selection. This video provides guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, including wall lanterns, for entryways and garages.
- Dimensiunea dispozitivului: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
- Înălțimea de montare: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
- Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
- Garage Doors: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.
Figura 3: Example of wall lantern placement for an entryway.
Figura 4: Example of wall lantern placement for a garage.
5.3 Cablare și montare
- Atașați suportul de montare la cutia de joncțiune folosind șuruburile furnizate.
- Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
- Introduceți cu grijă toate firele în cutia de joncțiune.
- Align the fixture with the mounting bracket and secure it with the provided screws or nuts.
5.4 Instalarea becului
- Insert one medium base incandescent bulb (not included) into the socket.
- Nu depășiți puterea maximătage de 100 wați.
- Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.
6. Instrucțiuni de utilizare
Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.
7. Întreținere
To maintain the appearance and functionality of your fixture:
- curatenie: Turn off power before cleaning. Wipe the fixture with a soft, damp Nu utilizați substanțe de curățare abrazive sau solvenți, deoarece acestea pot deteriora finisajul sau sticla.
- Înlocuire bec: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.
8. Depanare
If your fixture is not operating correctly, refer to the following common issues:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde | Fără curent la dispozitiv | Check circuit breaker, wall switch, and wiring connections. |
| Becul este ars | Înlocuiți becul. | Ensure bulb is screwed in tightly. |
| Lumină pâlpâitoare | Conexiune slăbită a becului sau a cablului | Tighten bulb. Check wiring connections (with power off). |
| Fixture is dim | Wat bec incorecttage | Asigurați-vă becul wattage is appropriate and not too low. |
9. Garanție și asistență
This Progress Lighting fixture is covered by a Garanție limitată de 1 an. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.
For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting website-ul.
