Prime TNOREM02

Manual de utilizare pentru telecomandă exterioară Prime TNOREM02 cu 2 prize și transmițător wireless

Model: TNOREM02

Introducere

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Prime TNOREM02 Outdoor Remote Control with Receiver and Transmitter

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Informații de siguranță

Vă rugăm să citiți și să înțelegeți toate instrucțiunile de siguranță înainte de a utiliza acest produs. Nerespectarea acestor instrucțiuni poate duce la electrocutare, incendiu sau vătămări corporale grave.

Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

Prime TNOREM02 Product Packaging

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Caracteristicile produsului

Close-up of Prime TNOREM02 Receiver Outlets

Imagine: Un prim-plan view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Înființat

  1. Selectați locația: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
  2. Conectați receptorul: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
  3. Conectați dispozitive: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattage of connected devices does not exceed 1875 Watts.
  4. Pregătiți transmițătorul: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.
Prime TNOREM02 Outdoor Remote Control in Use

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Instrucțiuni de operare

Using the Prime TNOREM02 is straightforward:

Întreţinere

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

  1. Locate the battery compartment on the back of the wireless transmitter.
  2. Using a small screwdriver or coin, carefully open the battery compartment cover.
  3. Remove the old CR2032 3V button-cell battery.
  4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
  5. Puneți bine capacul compartimentului bateriei.
  6. Testați telecomanda pentru a vă asigura că funcționează corect.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Depanare

ProblemăCauza posibilaSoluţie
Dispozitivele nu se pornesc/opresc.
  • Transmitter battery is dead or incorrectly installed.
  • Receiver is not plugged in or not receiving power.
  • Devices plugged into receiver are not switched ON or are faulty.
  • Receiver is out of range of the transmitter.
  • Overload protection triggered.
  • Replace the CR2032 battery in the transmitter, ensuring correct polarity.
  • Verify the receiver is securely plugged into a working outdoor outlet.
  • Ensure connected devices are in the ON position (if applicable) and functional.
  • Move closer to the receiver unit. Reduce obstructions between the transmitter and receiver.
  • Unplug devices, wait a few minutes, then plug them back in. Reduce the total load.
Reduced wireless range.
  • Obstacole între emițător și receptor.
  • Weak transmitter battery.
  • Interferențe de la alte dispozitive wireless.
  • Relocați receptorul sau emițătorul pentru a reduce la minimum obstrucțiile.
  • Înlocuiți bateria emițătorului.
  • Move the unit away from other strong wireless signals.
Unit stopped working after a period of use.
  • Defecțiunea componentelor interne.
  • Exposure to extreme weather conditions (e.g., direct lightning strike).
  • Overload damage.
  • If basic troubleshooting fails, the unit may require replacement.
  • Ensure the unit is installed in a location that offers reasonable protection from severe weather.
  • Verify connected devices do not exceed the maximum electrical rating.

Specificații

CaracteristicăDetaliu
Numărul de modelTNOREM02
MarcaPrim
Număr de prize2 (cu 3 pini împământați)
Tip firSJTW 14/3 Gauge
Tip prizăRight Angle, Grounded
UtilizareÎn aer liber
Max Watts1875 wați
Max Amps15 Amps
Volți maxim125 volți
Putere maximă1 / 3 HP
wireless RangePână la 80 de picioare
Baterie emițătorCR2032 3V Button-Cell
Dimensiunile produsului8 x 6.2 x 2.1 inci (aproximativ)
Greutatea articolului0.01 ounces (for remote control)
Tehnologia de conectivitateBluetooth
CertificariNot explicitly detailed, but designed for outdoor electrical use.

Garanție și suport

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime website-ul sau contactați canalele lor de asistență pentru clienți.

Documente conexe - TNOREM02

Preview Ghidul utilizatorului și informațiile de reglementare pentru PRIME SmartOutlets + telecomandă
Ghid complet pentru PRIME SmartOutlets + Telecomandă, care acoperă configurarea, resincronizarea, garanția și conformitatea cu reglementările FCC/IC. Aflați cum să utilizați și să depanați dispozitivele inteligente pentru casă.
Preview Robinet de perete PRIME cu 2 prize și încărcătoare USB - Ghid de utilizare și garanție
Instrucțiuni detaliate, informații despre reglementări și detalii despre garanție pentru robinetul de perete PRIME 2 cu încărcătoare USB (model USB05) de la Prime Wire & Cable, Inc.
Preview PRIME-750B Power Supply Unit: Quick Start Guide and Safety Information
Comprehensive guide for the PRIME-750B power supply unit, covering essential safety information, installation steps, component connection, powering up instructions, and technical specifications. Includes details on electrical safety, ventilation, hardware compatibility, and protection features.
Preview Informații despre instalarea și siguranța prizelor inteligente PRIME
Instrucțiuni de instalare, informații de siguranță și specificații pentru prizele inteligente de exterior controlate de la distanță PRIME SmartOutlets. Include ghid de configurare, conectare la aplicație și conformitate cu reglementările.
Preview Prime TNRCCD21 Plug-in Receiver and Remote Control User Manual
Comprehensive user manual for the Prime TNRCCD21 plug-in receiver and remote control system. Includes setup instructions, operation guide, helpful tips, battery replacement, FCC/IC compliance, and warranty information.
Preview Temporizator digital de interior Prime EZ-Set TNIDP12: Manual de utilizare și instrucțiuni de programare
User manual and instructions for the Prime EZ-Set Indoor Digital Timer (Model TNIDP12). Learn how to program custom on/off times, use preset options, countdown features, and understand safety guidelines and warranty information.