Manual de instrucțiuni pentru pompa submersibilă electrică Pedrollo Vortex Zxm1A/40

1. Produs terminatview

The Pedrollo Vortex Zxm1A/40 is a submersible electric pump designed for domestic drainage of wastewater, including water containing suspended solids up to 40 mm in diameter. This pump is engineered for straightforward installation and reliable automatic operation in fixed installations. It is suitable for applications requiring efficient removal of dirty water.

Figura 1: Pedrollo Vortex Zxm1A/40 Electric Submersible Pump. This image shows the complete pump unit, featuring a silver-colored motor housing, an orange handle, a float switch, and a blue pump body with an outlet port.

2. Informații de siguranță

Read all safety warnings and instructions carefully before installing, operating, or performing maintenance on this product. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

• Siguranta electrica: Always disconnect the pump from the power supply before handling, installing, or performing any maintenance. Ensure the power supply matches the pump's voltage requirements (220-240V). Use a ground fault circuit interrupter (GFCI) for all electrical connections.
• Siguranța apei: Do not operate the pump in water containing flammable or explosive materials. Ensure the pump is fully submerged during operation to prevent overheating.
• Manipulare: Never lift the pump by its power cable or float switch cable. Use the designated handle for transport and installation.
• Copii și animale de companie: Țineți copiii și animalele de companie departe de pompă și de zona acesteia de funcționare.
• Personal calificat: Installation and electrical connections should only be performed by qualified personnel in accordance with local regulations and standards.

3. Configurare și instalare

3.1 Despachetarea

Carefully remove the pump from its packaging. Inspect the pump for any signs of damage that may have occurred during transit. Retain packaging materials for future storage or transport.

3.2 Plasarea

1. Place the pump on a stable, flat surface in the lowest part of the area to be drained.
2. Ensure the pump is fully submerged in water during operation. The float switch requires sufficient space to move freely for automatic operation.
3. Avoid placing the pump directly on soft mud or sand, which could clog the intake. A solid base or platform is recommended.

3.3 Racordarea furtunului

1. Connect a suitable discharge hose to the pump's outlet port. Ensure the connection is secure and watertight to prevent leaks.
2. Route the discharge hose away from the area to be drained, ensuring it leads to an appropriate disposal point. Avoid kinks or sharp bends in the hose that could restrict flow.

3.4 Conexiune electrică

1. Verificați dacă sursa de alimentare voltage matches the pump's requirements (220-240V).
2. Connect the pump to a properly grounded electrical outlet protected by a Ground Fault Circuit Interrupter (GFCI).
3. Ensure the power cable is not stretched, pinched, or damaged. Keep the cable away from sharp objects and hot surfaces.

4. Instrucțiuni de utilizare

4.1 Pornirea inițială

1. After installation, ensure the pump is fully submerged and the float switch can move freely.
2. Plug the pump into the GFCI-protected electrical outlet.
3. The pump will start automatically when the water level rises and activates the float switch. It will stop when the water level drops and deactivates the float switch.

4.2 Funcționare normală

• Monitor the pump during its first few cycles to ensure proper function and drainage.
• The pump is designed for automatic operation. No manual intervention is typically required during normal use.
• Avoid running the pump dry, as this can cause damage. The float switch is designed to prevent dry running.

4.3 Închidere

To manually stop the pump, simply unplug it from the electrical outlet. For temporary cessation of automatic operation, secure the float switch in a position that prevents it from activating.

5. Întreținere

Întreținerea regulată asigură performanțe optime și prelungește durata de viață a pompei. Deconectați întotdeauna alimentarea cu energie electrică înainte de a efectua orice operațiune de întreținere.

5.1 Curățare

• Periodically inspect the pump intake for debris, such as leaves, rags, or other solids, which could obstruct flow. Clear any blockages carefully.
• Check the float switch for free movement and ensure it is not fouled by debris.
• Rinse the pump with clean water after use in heavily soiled conditions to prevent buildup.

5.2 Depozitare

If the pump will not be used for an extended period, especially in freezing conditions:

• Disconnect power and remove the pump from the water.
• Drain all water from the pump and hose.
• Curățați bine pompa.
• Depozitați pompa într-un loc uscat, ferit de îngheț.

6. Depanare

Înainte de a contacta asistența, reținețiview următoarele probleme și soluții comune:

7. Specificații

8. Garanție și asistență

For warranty information, technical support, or spare parts availability, please refer to the official Pedrollo website-ul web sau contactați distribuitorul autorizat. Păstrați bonul fiscal ca dovadă a achiziției pentru solicitările de garanție.

Availability of spare parts information is not provided in the product details. Please consult the manufacturer directly for specific inquiries.