Manual de utilizare pentru scanerul de coduri de bare Bluetooth KOAMTAC KDC350Li-MO-3K-R2

1. Introducere

This manual provides essential information for the safe and efficient operation of your KOAMTAC KDC350Li-MO-3K-R2 Bluetooth Barcode Scanner. Please read this manual thoroughly before using the device to ensure proper setup, usage, and maintenance.

2. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în pachetul produsului:

• KDC350Li-MO-3K-R2 Barcode Scanner
• Snur retractabil
• Cablu de încărcare/comunicare USB
• Product CD (containing drivers and software)

3. Dispozitiv terminatview

Familiarize yourself with the components of your KDC350Li-MO-3K-R2 scanner.

Imaginea 1: Faţă view of the KDC350Li-MO-3K-R2 scanner. The device features an OLED display at the top, showing 'KoamTac Data Collector KDC350_3key'. Below the screen are two green indicator lights. In the middle section, a prominent circular 'SCAN' button is flanked by two navigation keys on each side (left and right arrows). The KOAMTAC logo is visible at the bottom.

Componente cheie:

• Afișaj OLED: Shows device status, scanned data, and menu options.
• Butonul SCANARE: Activates the barcode scanning laser.
• Taste de navigare: Used to navigate through menus and options on the OLED display.
• Indicatoare luminoase: Provide visual feedback on power, battery, and connection status.

4. Configurare

4.1. Încărcarea bateriei

Before initial use, fully charge the KDC350Li-MO-3K-R2 scanner.

1. Connect the small end of the USB charge/communication cable to the KDC350's charging port.
2. Conectați capătul mare al cablului USB la un adaptor de alimentare USB (nu este inclus) sau la portul USB al unui computer.
3. The indicator light will show charging status. A full charge typically takes approximately 3-4 hours.

4.2. Pornire/Oprire

• Pentru a porni: Press and hold the SCAN button for approximately 3 seconds until the display illuminates.
• Pentru a opri: Navigate to the 'Power Off' option in the device menu using the navigation keys and confirm, or press and hold the SCAN button for approximately 5 seconds.

5. Instrucțiuni de utilizare

5.1. Basic Barcode Scanning

Pentru a scana un cod de bare:

1. Point the scanner's laser aperture at the barcode.
2. Press and hold the SCAN button. A red laser line will appear.
3. Align the laser line across the entire barcode.
4. Upon successful scan, the scanner will emit a beep, and the scanned data will appear on the OLED display.
5. Eliberați butonul SCAN.

5.2. Using the OLED Display and Navigation

The OLED display provides real-time information and access to device settings. Use the left and right navigation keys to scroll through menu options and select items.

6. Conectivitate Bluetooth

The KDC350Li-MO-3K-R2 supports Bluetooth connectivity for wireless data transfer to host devices such as smartphones, laptops, and desktops.

6.1. Pairing Modes

The scanner supports various Bluetooth profiles:

• HID (Human Interface Device): Functions as a keyboard, sending scanned data directly to any application with a cursor. No special software is required on the host device.
• SPP (Port serial Profile): Requires a KTSync application or custom software on the host device to receive data. Offers more control over data handling.
• MFi (Made For iPhone/iPad): Specific profile for iOS devices, often referred to as iOS Bluetooth.

6.2. Pairing with a Host Device

1. Ensure the KDC350 is powered on.
2. On the KDC350, navigate to the 'Bluetooth' menu and select the desired pairing mode (e.g., HID, SPP, iOS).
3. The scanner will enter pairing mode and become discoverable.
4. Pe dispozitivul gazdă (smartphone, tabletă, computer), activați Bluetooth și căutați dispozitivele disponibile.
5. Select 'KDC350' from the list of discovered devices.
6. Follow any on-screen prompts to complete the pairing process. A successful connection will be indicated on the KDC350's display and by an indicator light.

7. Întreținere

7.1. Curățarea dispozitivului

To maintain optimal performance, keep the scanner clean.

• Folosiți o cârpă moale, fără scame dampcu apă sau cu o soluție de curățare blândă.
• Nu utilizați produse de curățare abrazive, solvenți sau substanțe chimice dure.
• Ensure the scanning window is free of dust and smudges for accurate scanning.

7.2. Îngrijirea bateriei

Pentru a prelungi durata de viață a bateriei:

• Evitați temperaturile extreme.
• Charge the battery regularly, but avoid leaving it fully discharged for extended periods.
• Dacă depozitați dispozitivul pentru o perioadă lungă de timp, încărcați-l la aproximativ 50% înainte de depozitare.

8. Depanare

If you encounter issues with your KDC350Li-MO-3K-R2, refer to the following common problems and solutions:

• Dispozitivul nu pornește: Asigurați-vă că bateria este încărcată. Conectați la o sursă de alimentare și încercați din nou.
• Cannot scan barcodes: Check if the laser is active. Ensure the barcode is not damaged and is within the scanner's range. Clean the scanning window.
• Probleme de conexiune Bluetooth: Ensure Bluetooth is enabled on both the scanner and the host device. Verify the correct pairing mode is selected. Try unpairing and re-pairing the devices.
• Scanned data not appearing on host device: Confirm successful Bluetooth pairing. If using HID mode, ensure the cursor is in a text field. If using SPP, verify the KTSync application or custom software is running and configured correctly.

For further assistance, consult the KOAMTAC website-ul sau contactați asistența pentru clienți.

9. Specificații

10. Garanție și asistență

KOAMTAC products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty card included in your package or visit the official KOAMTAC website-ul.

For technical support, software downloads, or frequently asked questions, please visit the KOAMTAC support portal or contact their customer service directly. Contact details can typically be found on the manufacturer's website-ul.