1. Produs terminatview
The Aiphone GF-3B is a three-module backbox designed to serve as the foundational mounting component for modular entrance panel systems. It is specifically compatible with Aiphone GF, GH, and GT Series modular multi-tenant entry security systems. This backbox facilitates the secure installation of up to three modular components vertically, creating a robust and integrated entry panel solution.
The backbox is constructed from durable plastic and is intended for wall-mounting applications.
2. Conținutul pachetului
La deschiderea ambalajului, verificați dacă sunt prezente toate componentele:
- Aiphone GF-3B backbox
- (2) Joint pipes
- Mounting gauge
3. Instalare și configurare
The GF-3B backbox is designed for wall-mounting to establish the base for your modular entry panel system. Follow these general steps for installation:
- Selectarea site-ului: Choose a suitable wall location for the entry panel system. Ensure the surface is flat and capable of supporting the weight of the backbox and subsequent modules.
- Marcare: Use the provided mounting gauge to accurately mark the drilling points on the wall.
- Foraj: Drill pilot holes at the marked locations. Use appropriate drill bits for your wall material (e.g., masonry, drywall).
- Mounting the Backbox: Secure the GF-3B backbox to the wall using appropriate fasteners (not included, typically supplied with the modular components or purchased separately based on wall type). Ensure the backbox is level and firmly attached.
- Integrare modul: Once the backbox is securely mounted, individual Aiphone GF, GH, or GT series modular components (sold separately) can be inserted and secured into the backbox vertically. The backbox is designed to accept three such modules.
- Cablaj: Route necessary wiring for the modular components through the designated openings in the backbox. Refer to the specific installation manuals for the modular components for detailed wiring instructions.
Figure 1: The Aiphone GF-3B Three-Module Backbox. This image shows the black, rectangular backbox designed to house three modular components vertically. It features mounting tabs along its sides for secure installation.
4. Funcționare
The Aiphone GF-3B backbox itself does not have operational functions. Its purpose is to provide a secure and structured enclosure for the operational modular components of the Aiphone GF, GH, and GT Series multi-tenant entry security systems. Refer to the instruction manuals of the specific modular components (e.g., camera modules, audio modules, keypad modules) for their respective operational procedures.
5. Întreținere
The GF-3B backbox requires minimal maintenance. To ensure longevity and proper function of the overall system:
- curatenie: Periodically wipe the exterior of the backbox with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic material.
- Inspecţie: Occasionally inspect the mounting points and the integrity of the backbox for any signs of damage or loosening. Ensure all modular components remain securely seated within the backbox.
- Conditii de mediu: Ensure the backbox is installed in an environment consistent with the operating conditions specified for the modular components it houses.
6. Depanare
As a passive mounting component, the GF-3B backbox typically does not experience "trouble" in the traditional sense. Most issues will relate to its installation or the performance of the modular components it houses.
- Montare liberă: If the backbox feels loose on the wall, re-tighten fasteners. If the wall material is compromised, consider using different anchors or relocating the unit.
- Difficulty Inserting Modules: Ensure the backbox is not warped or damaged. Verify that the modular components are correctly oriented and aligned before attempting to insert them. Do not force modules into place.
- Defecțiune a sistemului: If the overall entry security system is not functioning, consult the troubleshooting guides for the specific Aiphone GF, GH, or GT series modular components installed within the backbox. The backbox itself is unlikely to be the cause of electronic malfunctions.
7. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | GF-3B |
| Dimensiunile produsului (înălțime x lățime x adâncime) | 11-5/8 x 4-5/16 x 1-3/4 inchi (295 x 110 x 44 mm) |
| Overall Product Dimensions (Packaged) | 12 x 4.8 x 2.2 inci; 12 uncii |
| Material | Plastic |
| Compatibilitate | Aiphone GF, GH, and GT Series modular multi-tenant entry security systems |
| Capacitatea modulului | Three modular pieces (vertical orientation) |
8. Garanție și asistență
For information regarding product warranty, technical support, or service, please refer to the official Aiphone website or contact Aiphone customer service directly. Aiphone meets International Organization for Standardization (ISO) standards 9001 and 14001.
Sediul central nord-american Aiphone: Bellevue, WA
Pentru cele mai recente resurse de asistență, vizitați: www.aiphone.com
