Frymaster 461176

Frymaster 8071692 Thermostat User Manual

Model: 461176

1. Introducere

This manual provides essential information for the proper installation, operation, and maintenance of the Frymaster 8071692 Thermostat. This component is designed as a replacement part for specific Frymaster and Dean commercial fryer models, ensuring accurate temperature control for optimal cooking performance and safety.

2. Informații de siguranță

AVERTIZARE: Always disconnect power to the fryer before attempting any installation, maintenance, or repair. Failure to do so can result in serious injury or death from electrical shock.

ATENŢIE: Commercial fryers operate at high temperatures. Allow the unit to cool completely before handling any internal components. Wear appropriate personal protective equipment (PPE) such as heat-resistant gloves and eye protection.

3. Descrierea produsului

The Frymaster 8071692 Thermostat (Model 461176) is a critical temperature control component for commercial deep fryers. It features a robust design with a capillary tube and bulb sensor, designed to accurately measure and regulate the oil temperature within a range of 200°F to 375°F. The thermostat ensures consistent cooking results and prevents overheating.

Frymaster 8071692 Thermostat with bulb and capillary tube

Image: The Frymaster 8071692 Thermostat, showing the main control unit, the coiled capillary tube, and the temperature sensing bulb at the end of the tube. A label on the unit warns about screw depth.

Caracteristicile cheie includ:

4. Configurare și instalare

Installation of this thermostat requires technical expertise and should be performed by a certified technician. The following steps are a general guide and do not replace the specific instructions found in your fryer's service manual.

  1. Deconectare de la curent: Ensure the fryer is completely disconnected from its power source and has cooled down.
  2. Îndepărtarea panoului de acces: Remove the necessary access panels to expose the existing thermostat and wiring.
  3. Old Thermostat Removal: Carefully disconnect the wiring from the old thermostat, noting the position of each wire. Remove the capillary bulb from its mounting location in the fryer vat and then remove the thermostat body from its mounting bracket.
  4. New Thermostat Installation: Mount the new Frymaster 8071692 thermostat body securely in the same location. Carefully route the new capillary tube and insert the bulb into the designated sensing well within the fryer vat. Ensure the bulb is fully seated for accurate temperature readings.
  5. Conexiune cablare: Connect the electrical wires to the new thermostat terminals exactly as they were connected to the old unit. Refer to the fryer's wiring diagram if unsure.
  6. Testare: Once installed, replace all access panels. Reconnect power to the fryer and perform a functional test to verify proper operation and temperature control. Calibrate if necessary according to the fryer manufacturer's instructions.

Note: The label on the thermostat unit indicates "DO NOT EXCEED 7/32" SCREW DEPTH BELOW MOUNTING SURFACE" to prevent damage during installation.

5. Instrucțiuni de utilizare

The Frymaster 8071692 Thermostat operates automatically to maintain the set oil temperature in your commercial fryer. Once installed and calibrated, its function is integrated with the fryer's control system.

6. Întreținere

Proper maintenance extends the life of your thermostat and ensures accurate temperature control.

7. Depanare

If you experience issues with your fryer's temperature control, consider the following common troubleshooting steps. Always ensure power is disconnected before inspecting internal components.

ProblemăCauza posibilaSoluţie
Fryer not heating or not reaching set temperature.
  • Fără putere pentru friteuză.
  • Element de încălzire defect.
  • Defecțiune a termostatului.
  • Conexiuni de cabluri slăbite.
  • Sensing bulb not properly seated or dirty.
  • Verificați sursa de alimentare și întrerupătorul de circuit.
  • Test heating elements for continuity (professional service recommended).
  • Test thermostat for proper operation (professional service recommended).
  • Inspect and tighten all electrical connections.
  • Clean sensing bulb and ensure it is fully inserted into the well.
Fryer overheating or not shutting off.
  • Thermostat stuck in closed position.
  • Safety limit switch tripped or faulty.
  • Replace thermostat if faulty (professional service recommended).
  • Check and reset high-limit switch. If it trips frequently, investigate underlying cause.
Citiri inexacte ale temperaturii.
  • Sensing bulb dirty or improperly seated.
  • Termostatul nu este calibrat.
  • Damaged capillary tube.
  • Clean bulb and ensure proper seating.
  • Calibrate thermostat (refer to fryer manual).
  • Inspect capillary tube for damage; replace thermostat if damaged.

For complex issues or if you are unsure about any repair, it is highly recommended to contact a qualified commercial kitchen equipment technician.

8. Specificații

Numărul piesei8071692
Numărul de model461176
MarcaFrymaster
Interval de temperatură200°C - 375°C
Dimensiunile becului5/16 inch (diameter) x 5 inches (length)
Lungimea capilară24 inci
Dimensiunile produsului5 x 2 x 2 inches (approximate, main unit)
Greutatea articolului7.04 uncii

9. Garanție și asistență

For specific warranty information regarding the Frymaster 8071692 Thermostat, please refer to the documentation provided with your original Frymaster equipment or contact Frymaster customer service directly. As a replacement part, its warranty may be subject to the terms of the original equipment warranty or specific replacement part warranty policies.

For technical support, parts inquiries, or service assistance, please contact Frymaster's authorized service centers or visit their official website. Always provide the model and serial number of your fryer, along with the part number (8071692) of the thermostat, when seeking support.

Documente conexe - 461176

Preview Ghid de instalare și utilizare: Friteuses électriques Frymaster KSCFH18E Cool Zone
Manual de instalare, utilizare și întreținere pentru fritele electrice Frymaster serie KSCFH18E Cool Zone. Includeți instrucțiunile de securitate, procedurile de depanare și o listă de piese pentru profesioniștii de la restaurare.
Preview Manual de instalare și utilizare a friteuzei pe gaz Frymaster Super Runner SR42, SR52, SR62
Manual complet de instalare și utilizare pentru friteuzele pe gaz Frymaster Super Runner, modelele SR42, SR52 și SR62. Acoperă procedurile de siguranță, instalare, conversie a gazului, utilizare și întreținere.
Preview Instrucțiuni de înlocuire a ecranului tactil al friteuzei Frymaster QuikTrip
Instrucțiuni detaliate pas cu pas pentru înlocuirea controlerului cu ecran tactil la friteuzele comerciale Frymaster QuikTrip. Acoperă deconectarea alimentării, demontarea componentelor, instalarea și furnizarea software-ului. Include depanarea pentru nepotrivirile de versiuni de software.
Preview Manualul componentelor majore Frymaster și Dean - Piese și diagrame
Manual complet care detaliază componentele principale, piesele și diagramele pentru friteuzele comerciale Frymaster și Dean, aparatele de gătit paste, dulapurile de depozitare și echipamentele de bucătărie aferente. Include numerele de model și specificațiile.
Preview Ghid de înlocuire și actualizare software a controlerului Frymaster FQ4000 Taco Bell
Comprehensive guide for Frymaster FQ4000 series fryers, detailing the replacement of Taco Bell controllers with the Common Controller and the necessary software update procedure using a USB drive. Includes kit contents, step-by-step instructions, and troubleshooting tips.
Preview Frymaster Gen III LOV™ BIELA14-T Serie - Manual de Servicio
Manual de serviciu pentru freza electrică Frymaster Gen III LOV™ serie BIELA14-T. Include procedurile de întreținere, soluția problemelor și ghidurile tehnice pentru bucătărie comercială.