1. Produs terminatview
The ACI 377140 Windshield Washer Pump is engineered to meet or exceed Original Equipment (OE) performance standards. This pump is designed for reliable and durable operation, ensuring effective windshield cleaning. It features an OE-style electrical connector and is equipped with three nozzles for efficient fluid delivery.
Figura 1: ACI 377140 Windshield Washer Pump. This image shows the complete pump unit, including the main body, electrical connector at the top, and the fluid outlet with three nozzles at the bottom.
2. Caracteristicile produsului
- OE Performance Matching: Engineered to match Original Equipment washer pumps for seamless integration and performance.
- Direct Fit Design: Specifically designed to fit original windshield washer pump applications.
- OE Style Electrical Connector: Ensures a secure and compatible electrical connection.
- Three Nozzles: Equipped with three nozzles for effective and broad fluid distribution on the windshield.
3. Ghid de instalare
Installation of the ACI 377140 Windshield Washer Pump typically involves replacing the existing pump. While the process can vary by vehicle model, the general steps are outlined below. It is recommended to consult your vehicle's service manual for specific instructions related to your make and model.
- Siguranța pe primul loc: Ensure the vehicle is turned off and the parking brake is engaged. Disconnect the negative terminal of the battery to prevent electrical hazards.
- Locate the Washer Reservoir: The windshield washer pump is usually located at the bottom of the windshield washer fluid reservoir. Access to the reservoir may require removing fender liners, bumper components, or other under-hood parts depending on the vehicle.
- Scurgerea fluidului: If possible, drain the washer fluid from the reservoir to minimize spillage during pump removal.
- Deconectați conectorul electric: Carefully disconnect the electrical connector from the old pump.
- Remove Hoses: Disconnect the washer fluid hoses from the old pump. Be prepared for some fluid to leak out.
- Scoateți pompa veche: The pump is typically held in place by a rubber grommet or a clip. Gently pull or unclip the old pump from the reservoir.
- Instalați o pompă nouă: Insert the new ACI 377140 pump into the reservoir opening, ensuring it seats firmly in the grommet.
- Reconnect Hoses and Electrical: Reattach the washer fluid hoses to the new pump and securely connect the electrical connector.
- Rezervor de reumplere: Fill the washer fluid reservoir with appropriate windshield washer fluid.
- Funcționare de testare: Reconnect the battery, turn on the vehicle, and test the windshield washer system to ensure proper function and check for leaks.
Note: Some vehicle designs may require significant disassembly of surrounding components to access the washer pump. Patience and proper tools are essential for a successful installation.
4. Instrucțiuni de utilizare
The ACI 377140 Windshield Washer Pump operates as part of your vehicle's existing windshield washer system. Once installed, its operation is integrated with your vehicle's controls.
- Activare: To activate the pump, use the windshield washer stalk or button inside your vehicle, typically located on the steering column. Refer to your vehicle's owner's manual for the exact control mechanism.
- Fluid Delivery: Upon activation, the pump draws fluid from the reservoir and delivers it under pressure through the washer nozzles onto the windshield.
- Wiper Activation: In most vehicles, activating the washer pump will also automatically engage the windshield wipers for a few cycles to clear the fluid and debris.
Ensure the washer fluid reservoir is adequately filled for optimal performance.
5. Întreținere
The ACI 377140 Windshield Washer Pump is designed for durability and requires minimal direct maintenance. However, maintaining the overall windshield washer system will ensure the longevity and performance of the pump.
- Nivelul lichidului: Regularly check and maintain the windshield washer fluid level in the reservoir. Do not allow the reservoir to run dry, as this can cause the pump to run without lubrication and potentially shorten its lifespan.
- Tip fluid: Use only approved windshield washer fluid. Avoid using plain water, especially in freezing temperatures, as it can freeze and damage the pump or lines.
- Blocaje pentru duze: Periodically check the windshield washer nozzles for clogs. Clogged nozzles can increase back pressure on the pump, potentially leading to premature wear. Clear any blockages using a fine needle or pin.
- Scurgeri de sistem: Inspect hoses and connections for any signs of leaks. Leaks can reduce fluid pressure and cause the pump to work harder.
6. Depanare
If you experience issues with your windshield washer system after installing the ACI 377140 pump, consider the following troubleshooting steps:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| No fluid sprays or weak spray |
|
|
| Fluid leaks around pump area |
|
|
| Pompa merge, dar nu are lichid |
|
|
7. Specificații
| Atribut | Valoare |
|---|---|
| Producător | ACI |
| Marca | ACI |
| Numărul de model al articolului | 377140 |
| Numărul piesei producătorului | 377140 |
| Greutatea articolului | 3.2 uncii |
| Dimensiunile produsului | 3.3 x 3.5 x 2.6 inci |
| ASIN | B00FAMAEP4 |
| Data primului disponibil | 18 septembrie 2013 |
8. Garanție și asistență
Specific warranty details for the ACI 377140 Windshield Washer Pump are typically provided at the point of purchase or can be found on the manufacturer's official website. Vă rugăm să păstrați dovada achiziției pentru orice reclamații în garanție.
For technical support, installation assistance, or warranty inquiries, please contact ACI customer service or the retailer from whom the product was purchased. Always refer to the official ACI resources for the most accurate and up-to-date information.
