KEYSIGHT U1272A Handheld Digital Multimeter User Manual

1. Introducere

This manual provides essential information for the safe and effective operation of the KEYSIGHT U1272A Handheld Digital Multimeter. The U1272A is a robust, 4.5-digit, water and dust resistant multimeter designed for professional use in various electrical measurement applications. It features an Organic LED display and intelligent functions to enhance productivity and safety.

2. Informații de siguranță

AVERTIZARE:

• Respectați întotdeauna codurile de siguranță locale și naționale.
• Do not use the multimeter if it appears damaged or is operating abnormally.
• Asigurați-vă că sondele de testare sunt în stare bună și conectate corect înainte de a efectua măsurători.
• Observe all terminal ratings and maximum input values.
• Acest produs este destinat exclusiv utilizării profesionale.

The U1272A is rated CAT IV 600V and CAT III 1000V, indicating its suitability for measurements in high-energy electrical environments. Always use appropriate personal protective equipment (PPE).

3. Produs terminatview

The KEYSIGHT U1272A is designed for ergonomic handling and durability, featuring an IP54 rating for water and dust resistance.

Figura 3.1: Faţă view of the U1272A multimeter, showing the OLED display, function dial, and input terminals.

Figura 3.2: Latura view of the U1272A multimeter, highlighting its ergonomic, non-slip design.

Figura 3.3: Spate view of the U1272A multimeter, showing the battery compartment and stand.

Caracteristici cheie:

• 30,000 counts resolution with 0.7% for ACV accuracy.
• Organic LED (OLED) display for clear readings in various lighting conditions.
• Intelligent features like Low Pass Filter (LPF) for noise elimination and Qik-V for quick AC/DC voltage determination.
• Visual alert blinks in addition to the beeper for Continuity test in noisy environments.
• IP54 certified for water and dust resistance.
• Connectivity to PC/internal memory for logging up to 10,000 readings.

4. Configurare

4.1 Instalarea bateriei

The U1272A is powered by batteries. To install or replace batteries:

1. Ensure the multimeter is turned OFF and disconnect all test leads from the terminals.
2. Localizați capacul compartimentului bateriilor din spatele unității (consultați Figura 3.3).
3. Deșurubați șuruburile de fixare și scoateți cu grijă capacul.
4. Insert new batteries, observing correct polarity (+/-) as indicated inside the compartment.
5. Puneți la loc capacul și fixați-l cu șuruburile.

4.2 Pornirea inițială

After battery installation, turn the rotary switch to any function to power on the device. The OLED display will illuminate, and a self-test will be performed. If the display does not light up, check battery installation.

5. Instrucțiuni de utilizare

5.1 Măsurători de bază

To perform basic measurements, select the desired function using the rotary switch and connect the test leads to the appropriate input terminals.

• Voltage Measurement (V~, V-): Connect the red lead to the VΩHz terminal and the black lead to the COM terminal. Select AC (V~) or DC (V-) voltage.
• Current Measurement (A, mA, µA): Connect the red lead to the appropriate current terminal (10A, 440mA, or µA) and the black lead to the COM terminal. Select the desired current range. Ensure the circuit is de-energized before connecting the multimeter in series.
• Măsurarea rezistenței (Ω): Connect the red lead to the VΩHz terminal and the black lead to the COM terminal. Select the Ω function.
• Continuity Test (audible beep and visual alert): Connect the red lead to the VΩHz terminal and the black lead to the COM terminal. Select the continuity function. The meter will beep and visually alert for continuity.

5.2 Caracteristici avansate

• LPF (filtru trece jos): Activates a low pass filter to remove high-frequency noise and harmonics, useful for measurements on variable frequency drives (VFDs).
• Qik-V: Allows for quick determination of AC or DC voltage without manually selecting the mode.
• Înregistrarea datelor: The U1272A can store up to 10,000 readings. Refer to the detailed user manual for instructions on setting up logging intervals and transferring data to a PC.

6. Întreținere

6.1 Curățare

Pentru a curăța multimetrul, ștergeți carcasa cu un detergent de vată.amp cloth and a mild detergent. Do not use abrasives or solvents. Ensure the device is powered off and leads are disconnected before cleaning.

6.2 Calibrare

The U1272A is factory calibrated. For continued accuracy, periodic calibration by a qualified service center is recommended. Refer to Keysight's official support channels for calibration services.

6.3 Depozitare

Când nu îl utilizați pentru perioade lungi de timp, scoateți bateriile pentru a preveni scurgerile. Depozitați multimetrul într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.

7. Depanare

For issues not listed here, or if solutions do not resolve the problem, contact Keysight customer support.

8. Specificații

9. Garanție și asistență

9.1 Informații despre garanție

KEYSIGHT products are designed for professional use and come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Keysight Technologies webPăstrați dovada achiziției pentru reclamații în garanție.

9.2 Asistență pentru clienți

For technical assistance, service, or calibration inquiries, please contact Keysight Technologies customer support. Visit www.keysight.com/us/en/support.html for contact information and resources.