Manual de utilizare pentru placa de bază Supermicro X10SLM-FB LGA1150 MicroATX Server

1. Introducere

This manual provides comprehensive instructions for the installation, configuration, operation, and maintenance of the Supermicro X10SLM-F-B MicroATX Server Motherboard. Designed for reliable server performance, this motherboard supports Intel LGA1150 processors and features the Intel C224 PCH chipset, DDR3 memory, SATA3, USB 3.0, and dual Gigabit Ethernet. Please read this manual thoroughly before proceeding with installation and operation to ensure proper functionality and system stability.

2. Produs terminatview

The Supermicro X10SLM-F-B is a MicroATX server motherboard engineered for robust performance and reliability in server environments. Key features include:

• Socket CPU: LGA1150 for Intel Xeon E3-1200 v3/v4 series, 4th Gen Core i3, Pentium, Celeron processors.
• Chipset: Intel C224 PCH.
• Memorie: 4x DDR3 DIMM slots supporting up to 32GB Unbuffered ECC DDR3 1600MHz.
• Sloturi de expansiune: 1x PCI-E 3.0 x16, 1x PCI-E 2.0 x4 (in x8 slot), 1x PCI-E 2.0 x4 (in x4 slot).
• Depozitare: 6x SATA3 (6Gbps) ports.
• Rețea: Dual Gigabit Ethernet LAN ports (Intel i210AT).
• Grafică integrată: Aspeed AST2400 BMC for IPMI 2.0 with KVM over IP.
• Porturi USB: USB 3.0 and USB 2.0 ports.

Figura 1: Supermicro X10SLM-F-B Motherboard Layout. This image displays the full layout of the motherboard, highlighting the LGA1150 CPU socket at the center, surrounded by four DDR3 DIMM slots (two blue, two black). To the left, multiple PCI-E expansion slots are visible. The bottom right features six SATA ports and USB 3.0 headers. The top section includes various I/O ports such as VGA, USB, and LAN. A yellow protective cap is present on the CPU socket, indicating the importance of its removal before CPU installation.

3. Configurare sistem

Follow these steps for proper installation of components onto your Supermicro X10SLM-F-B motherboard.

3.1 Instalarea CPU

1. Pregătiți soclul: Gently lift the load lever and open the CPU socket cover.
2. Îndepărtați capacul de protecție: Carefully remove the yellow protective cap from the LGA1150 socket. Retain this cap for future use if the CPU is removed or the motherboard is returned.
3. Instalați procesorul: Aliniați marcajul triunghiular de pe procesor cu marcajul corespunzător de pe soclu. Introduceți cu grijă procesorul în soclu, fără a-l forța.
4. CPU securizat: Close the socket cover and press down the load lever until it locks into place.
5. Instalați coolerul procesorului: Attach the compatible LGA1150 CPU cooler according to its manufacturer's instructions.

3.2 Instalarea memoriei

The X10SLM-F-B supports DDR3 Unbuffered ECC DIMMs. For optimal performance, install memory modules in pairs.

1. Open DIMM Clips: Push open the white clips at both ends of the DIMM slots.
2. Aliniați memoria: Aliniați crestătura de pe modulul de memorie DDR3 cu cheia din slotul DIMM.
3. Introducere memorie: Insert the module firmly into the slot until the clips snap into place, securing the module.

3.3 Storage Device Connection

Connect your SATA storage devices (HDDs, SSDs) to the SATA3 (6Gbps) ports located on the motherboard.

• Use SATA data cables to connect storage devices to the available SATA ports.
• Ensure power cables from the power supply are connected to each storage device.

3.4 Conexiune la alimentare

Connect the power supply unit (PSU) to the motherboard.

• Connect the 24-pin ATX main power connector to the corresponding slot on the motherboard.
• Connect the 8-pin (or 4-pin) ATX 12V CPU power connector to the slot near the CPU socket.

4. Instrucțiuni de utilizare

4.1 Configurarea BIOS/UEFI

The BIOS (Basic Input/Output System) or UEFI (Unified Extensible Firmware Interface) allows you to configure system settings. To access the BIOS/UEFI setup utility:

• Porniți sistemul.
• Apăsați tasta DEL key repeatedly during the Power-On Self-Test (POST) to enter the BIOS/UEFI setup.
• Navigate through the menus using arrow keys and make necessary adjustments for boot order, SATA mode (AHCI/RAID), and other system parameters.
• Save changes and exit to restart the system.

4.2 Instalarea sistemului de operare

After configuring the BIOS/UEFI, you can proceed with installing your preferred operating system (e.g., Windows Server, Linux distributions).

1. Prepare Installation Media: Create a bootable USB drive or DVD with your operating system installation files.
2. Setare ordine de pornire: In BIOS/UEFI, set the boot priority to your installation media.
3. Install OS: Follow the on-screen prompts to install the operating system.
4. Instalați drivere: After OS installation, install all necessary drivers for the motherboard components (chipset, LAN, graphics, etc.) from the Supermicro website-ul sau discul cu drivere furnizat.

5. Întreținere

5.1 Curățare

Curățarea regulată ajută la menținerea performanței optime și prelungește durata de viață a plăcii de bază.

• Oprire: Always power down and unplug the system before cleaning.
• Îndepărtarea prafului: Use compressed air to gently remove dust from components, especially heatsinks and fan blades. Hold fans to prevent over-spinning.
• Curățarea suprafețelor: Utilizați ușor o cârpă moale, fără scame dampened with isopropyl alcohol to clean non-conductive surfaces if necessary. Avoid direct contact with sensitive components.

5.2 de actualizări de firmware

Supermicro periodically releases BIOS and IPMI firmware updates to improve stability, compatibility, and add new features. Refer to the Supermicro official website for the latest firmware versions and detailed update procedures.

• Actualizare BIOS: Typically performed via a USB drive or a utility within the BIOS.
• IPMI Firmware Update: Can often be updated through the IPMI web interface. Note that some advanced IPMI features, such as KVM over IP BIOS updates, may require an activation key.

6. Depanare

Această secțiune oferă soluții pentru problemele comune pe care le-ați putea întâmpina.

• Fără putere:
  • Asigurați-vă că toate cablurile de alimentare (ATX cu 24 de pini, CPU cu 8 pini) sunt conectate corect.
  • Verify the power supply unit (PSU) is switched on and functioning correctly.
  • Check front panel power switch connections to the motherboard.
• Fără afișare:
  • Confirm the monitor is connected to the correct video output (onboard VGA or discrete graphics card).
  • Reseat memory modules and expansion cards.
  • Check for POST beep codes (refer to Supermicro documentation for specific codes).
• Instabilitate/Blocaje ale sistemului:
  • Verify memory modules are correctly installed and compatible.
  • Verificați temperaturile procesorului și chipset-ului.
  • Asigurați-vă că toți driverele sunt instalate și actualizate.
  • Rulați instrumente de diagnosticare a memoriei.
• Sistemul de operare nu pornește:
  • Check BIOS/UEFI boot order settings.
  • Verify storage device connections.
  • Ensure the operating system installation is not corrupted.

For more detailed troubleshooting, consult the official Supermicro X10SLM-F-B manual available on the Supermicro website or contact Supermicro technical support.

7. Specificații

8. Garanție și asistență

8.1 Informații despre garanție

Supermicro products typically come with a limited manufacturer's warranty. The duration and terms of the warranty may vary by region and reseller. Please refer to the warranty card included with your product or visit the official Supermicro website-ul pentru cele mai recente și detaliate informații despre garanție.

Păstrați dovada achiziției pentru reclamațiile în garanție.

8.2 Suport tehnic

For technical assistance, driver downloads, BIOS updates, and further documentation, please visit the official Supermicro support website:

www.supermicro.com/support/

When contacting support, please have your motherboard model (X10SLM-F-B) and serial number ready.