Produs terminatview
The Exmark 109-7188 Discharge Chute is a genuine replacement part designed to effectively direct grass clippings away from the mower deck during operation. This component is crucial for maintaining a clean cutting path and ensuring safety by controlling the discharge of debris. It is manufactured to Exmark's specifications, ensuring a precise fit and reliable performance for compatible models.
This part is a genuine Exmark Toro Factory Part Number 109-7188.
Figura 1: Față view of the Exmark 109-7188 Discharge Chute, showing its robust construction and mounting points.
Compatibilitate
The 109-7188 Discharge Chute is compatible with a wide range of Exmark equipment. Please verify your specific model and serial number against the list below and consult your original owner's manual to confirm correct fitment, as variations can occur by sub-model, serial number, and/or production date.
Compatible Exmark Series:
- Lazer Z (including AS, Diesel, E-Series, S-Series, X-Series, Z-Series)
- Pioneer S-Series
- Quest P-Series
- Radius (including E-Series, S-Series, X-Series)
- Seria S de la Staris
- Turf Tracer seria X
- Vantage (including S-Series, X-Series)
Figura 2: lateral view of the discharge chute, highlighting its shape and the Exmark branding.
Configurare și instalare
Proper installation of the discharge chute is essential for safe and effective operation. Always refer to your equipment's specific service manual for detailed instructions.
Pașii de instalare:
- Siguranța pe primul loc: Before beginning any installation, ensure the engine is turned off, the spark plug wire is disconnected (for gasoline models), and the equipment is stable and cannot accidentally start or move. Allow any hot components to cool.
- Remove Old Chute (if applicable): If replacing an existing chute, carefully remove any bolts, pins, or clips securing the old discharge chute to the mower deck. Note the orientation and attachment points.
- Position New Chute: Align the new Exmark 109-7188 Discharge Chute with the mounting points on your mower deck. Ensure it sits flush and correctly covers the discharge opening.
- Elemente de fixare sigure: Insert the appropriate bolts, washers, and nuts (or other securing hardware) through the mounting holes. Hand-tighten all fasteners initially.
- Strângere finală: Once all fasteners are in place and the chute is properly aligned, tighten them securely using appropriate tools. Do not overtighten, but ensure there is no wobble or looseness.
- Verificați compatibilitatea: Gently test the movement of the chute (if it's designed to pivot) and visually inspect that it is securely attached and does not interfere with any other moving parts.
Ghid de operare
The discharge chute's primary function is to safely direct grass clippings away from the mower deck. Adhere to the following guidelines during operation:
- Maintain Clear Discharge Area: Always ensure the area where clippings are discharged is clear of people, pets, and obstacles.
- Conștientizarea deșeurilor: Be aware that the chute can discharge small stones or other debris at high speeds. Wear appropriate personal protective equipment (PPE), including eye protection.
- Evitați înfundarea: Mow at appropriate speeds and avoid cutting excessively tall or wet grass, which can lead to clogging of the discharge chute.
- Inspecție regulată: Periodically check the chute during operation for any signs of blockage or damage.
Întreţinere
Regular maintenance of your discharge chute will extend its lifespan and ensure optimal performance.
- curatenie: After each use, or as needed, clean any accumulated grass clippings, dirt, or debris from the inside and outside of the discharge chute. A stiff brush or scraper can be used. Ensure the chute is completely dry before storage to prevent rust or mildew.
- Inspecție pentru daune: Periodically inspect the chute for cracks, dents, excessive wear, or any other damage that could affect its function or safety. Pay close attention to the edges and mounting points.
- Verificați elementele de fixare: Ensure all bolts, nuts, and other fasteners securing the chute to the mower deck remain tight. Tighten any loose fasteners to prevent vibration and potential detachment during operation.
- Depozitare: Store the equipment in a dry, protected area to prevent environmental damage to the chute and other components.
Figura 3: Partea inferioară view of the discharge chute, showing the smooth surface for grass flow.
Depanare
If you encounter issues with your discharge chute, consider the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Grass clippings not discharging properly or clogging. |
|
|
| Chute feels loose or vibrates excessively. |
|
|
Specificații
| Atribut | Detaliu |
|---|---|
| Numărul piesei | 109-7188 |
| Producător | Exmark |
| Dimensiunile produsului | 18 x 16 x 12 inci |
| Greutatea articolului | 5.42 lire sterline |
Garanție și asistență
For specific warranty information regarding your Exmark 109-7188 Discharge Chute, please refer to the documentation provided with your original equipment or contact Exmark directly. Warranty terms can vary based on purchase date and region.
For technical support, replacement parts, or further assistance, please visit the official Exmark website-ul lor sau contactați departamentul lor de asistență pentru clienți. De asemenea, puteți vizita Magazinul Exmark pe Amazon pentru produse și informații suplimentare.
