Intermec PM43c Direct Thermal Printer User Manual

1. Introducere

The Intermec PM43c is a mid-range industrial direct thermal printer designed for a wide range of applications within distribution centers, warehouses, and manufacturing environments. It is engineered for rapid deployment and seamless integration into existing systems, featuring a user-friendly interface and robust connectivity options.

This manual will guide you through the setup, operation, and maintenance of your PM43c printer to ensure optimal performance and longevity.

2. Informații de siguranță

Please read all safety instructions carefully before operating the printer. Failure to do so may result in injury or damage to the equipment.

• Conectați întotdeauna imprimanta la o priză de alimentare cu împământare.
• Do not operate the printer in wet or excessively humid conditions.
• Asigurați o ventilație adecvată în jurul imprimantei pentru a preveni supraîncălzirea.
• Țineți mâinile și hainele largi departe de piesele în mișcare în timpul funcționării.
• Use only approved Intermec accessories and replacement parts.
• Deconectați alimentarea înainte de a efectua orice operațiune de întreținere sau curățare.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• Intermec PM43c Direct Thermal Printer
• Power Cord (US Power Cord)
• Ghid de pornire rapidă (nu este inclus în acest manual)
• Documentation CD (if applicable)

Figure 1: Intermec PM43c Direct Thermal Printer. This image shows the Intermec PM43c direct thermal printer from a front-right angle. The printer features a gray casing with a dark gray control panel on the front. The control panel includes a color screen displaying 'Ready', along with a numeric keypad, function buttons (F1-F5), and navigation buttons. The Intermec logo is visible on the top right of the printer casing.

4. Configurare

4.1 Instalare fizică

1. Plasare: Position the printer on a stable, level surface with adequate space for media loading and output. Ensure proper ventilation.
2. Conexiune de alimentare: Connect the power cord to the printer's AC inlet and then to a grounded electrical outlet.

4.2 Încărcare media

The PM43c supports various media types, including roll-fed labels, fanfold labels, and tags. Refer to the printer's internal diagrams for specific media path instructions.

1. Deschideți capacul media.
2. Load the label roll onto the media supply spindle, ensuring the labels feed correctly into the print mechanism.
3. Adjust the media guides to fit the width of your labels.
4. Close the media cover. The printer will automatically calibrate for the new media.

4.3 Conectivitate

The PM43c offers USB and Ethernet connectivity options.

• Conexiune USB: Connect a USB cable from the printer to your PC. Drivers may be required for initial setup.
• Conexiune Ethernet: Connect an Ethernet cable from the printer to your network. The printer supports standard IPv6 implementation. Network configuration can be performed via the control panel or through network management tools.

5. Instrucțiuni de utilizare

5.1 Panoul de control pesteview

The PM43c features a large, color, multilingual, tamper-proof touch screen or icon user interface. The control panel allows for direct interaction with printer settings and status.

• Ecran de afișare: Shows printer status, menus, and error messages. (As seen in Figure 1, it displays "Ready").
• Tastatură numerică: Used for entering numerical values or navigating menus.
• Butoane funcționale (F1-F5): Programmable buttons for quick access to common functions.
• Butoane de navigare: Pentru navigarea prin opțiunile din meniu.
• Feed Button (Blue button): Used to feed a blank label or perform a media calibration.

5.2 Imprimare de bază

1. Ensure the printer is powered on and media is loaded correctly.
2. Verify the printer status on the display screen (e.g., "Ready").
3. Send a print job from your connected computer or system.
4. Monitor the printer for job completion and any status messages.

5.3 Configurare

The PM43c supports "no-touch" configuration capabilities, allowing for remote setup and management. For detailed configuration, refer to the comprehensive technical documentation available from Intermec.

• Setări de rețea: Configure IP address, subnet mask, and gateway for Ethernet connectivity.
• Setări de imprimare: Adjust print speed, darkness, and label format settings.
• Calibrarea senzorului: Calibrate media sensors for accurate label detection.

6. Întreținere

Regular maintenance ensures consistent print quality and extends the life of your printer.

6.1 Curățare

1. Cap de imprimare: Gently clean the printhead with an approved printhead cleaning wipe or isopropyl alcohol. Allow to dry completely before use.
2. Rolă de platană: Clean the platen roller with isopropyl alcohol to remove adhesive residue and dust.
3. Exterior: Ștergeți exteriorul casing cu un d moaleamp pânză. Nu utilizați produse de curățare abrazive.

6.2 Înlocuirea suportului media

Replace media rolls as described in Section 4.2. Ensure proper alignment and calibration after each replacement.

7. Depanare

This section addresses common issues you might encounter with your PM43c printer.

For more complex issues, refer to the full technical manual or contact Intermec support.

8. Specificații

Key technical specifications for the Intermec PM43c Direct Thermal Printer:

9. Garanție și asistență

For specific warranty terms and conditions, please refer to the documentation provided with your printer or visit the official Intermec website. Warranty information is typically provided by the manufacturer at the time of purchase.

For technical support, driver downloads, and additional resources, please visit the official Intermec support website-ul sau contactați distribuitorul autorizat.

Producător: INTERMEC - FIXED PRINTER (PM43)

Website: www.intermec.com