Introducere
Thank you for choosing the Mount-It! Height Adjustable TV Wall Mount Bracket. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Please read this manual thoroughly before installation and keep it for future reference.
Imagine: față view of the Mount-It! Height Adjustable TV Wall Mount Bracket in silver, showing the wall plate, articulating arm, and VESA mounting plate.
Informații de siguranță
AVERTIZARE: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you have any questions, please contact Mount-It! customer service.
- Do not install this product if you cannot understand the instructions or are unsure about the installation process.
- Asigurați-vă că suprafața de montare poate susține în siguranță greutatea combinată a suportului și a afișajului.
- Use only the provided hardware. Do not use power tools to tighten screws unless specified.
- Acest produs este destinat numai utilizării în interior.
- Țineți copiii și animalele de companie departe în timpul instalării.
- Periodically check that the mount is secure and safe to use.
Conținutul pachetului
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Mount-It! for assistance.
| Componentă | Cantitate |
|---|---|
| Montare pe perete | 1 |
| Placă de montare VESA | 1 |
| Kit de hardware (șuruburi, ancore, șaibe, distanțiere) | 1 set |
| Allen Wrench | 1 |
| Manual de instructiuni | 1 |
Configurare și instalare
Before installation, ensure you have the necessary tools (e.g., drill, stud finder, level, screwdriver) and that the wall structure is suitable for mounting.
Step 1: Determine Mounting Location and Wall Type
Identify the desired location for your TV. This mount supports installation on wood studs or concrete walls.
Image: Illustration showing mounting options for concrete walls (use lag bolts and anchors) and wood stud walls (use lag bolts).
Pasul 2: Atașați placa VESA la televizor
Carefully place your TV face down on a soft, clean surface. Attach the VESA mounting plate to the back of your TV using the appropriate screws and spacers from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
This mount is compatible with VESA patterns: 100x100, 200x100, 200x200, 300x300, 400x200, and 400x400 mm.
Image: Diagram illustrating various VESA mounting patterns (100x100, 200x200, 400x400) and indicating compatibility with screen sizes from 25" to 55" and a maximum display weight of 44 lbs.
Step 3: Mount Wall Plate to Wall
Position the wall plate at the desired height and mark the drilling locations. Drill pilot holes according to your wall type (wood stud or concrete). Secure the wall plate to the wall using the lag bolts and, if necessary, concrete anchors. Use a level to ensure the wall plate is perfectly horizontal.
Step 4: Hang TV onto Wall Mount
With assistance, carefully lift the TV (with the VESA plate attached) and hook it onto the wall mount arm. Ensure it is securely seated. Tighten any safety screws or mechanisms to prevent accidental dislodging.
Instrucțiuni de operare
Your Mount-It! TV Wall Mount Bracket offers a dynamic range of motion for optimal viewing.
Reglarea înălțimii
The gas spring arm allows for smooth vertical height adjustments. Gently push or pull the TV to the desired height. The mount provides up to 13.5 inches of height adjustment.
Image: The TV mount demonstrating a 13.5-inch vertical height adjustment range.
Arm Extension and Tilt
Extend the arm up to 21 inches from the wall or retract it to a minimum of 2.5 inches. The mount also allows for a tilt range of +/- 15 degrees to reduce glare and optimize viewunghiuri de ing.
Image: The TV mount showing its arm extension from a minimum of 2.5 inches to a maximum of 21 inches, and a tilt range of +/- 15 degrees.
Reglare rotativă
The mount features multiple swivel joints, allowing for extensive horizontal rotation. The wall-side joint swivels 180 degrees, the middle joint swivels 270 degrees, and the TV-side joint swivels 180 degrees, providing full motion flexibility.
Image: Diagram illustrating the swivel capabilities of the mount: 180 degrees at the wall, 270 degrees in the middle, and 180 degrees at the TV plate.
Întreţinere
Întreținerea regulată asigură longevitatea și funcționarea în siguranță a suportului de perete pentru televizor.
- curatenie: Ștergeți suportul cu o cârpă moale și uscată. Evitați utilizarea de produse de curățare abrazive sau solvenți.
- Verificare periodică: Every few months, check all screws and connections to ensure they are tight and secure.
- Tensiunea arcului cu gaz: If the TV is dropping or not holding its position, the gas spring tension may need adjustment.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| TV is dropping or not holding height. | Gas spring tension is too loose for the TV's weight. | Tighten the arm tension using the provided Allen wrench. Turn counter-clockwise for heavier monitors, clockwise for lighter monitors. Refer to the diagram below. |
| Mount feels too stiff to move. | Gas spring tension is too tight. | Loosen the arm tension using the provided Allen wrench. |
| Mount is wobbly after installation. | Wall plate not securely fastened or wall structure is inadequate. | Re-check all wall plate screws and ensure they are tightened. Verify the wall can support the weight. If unsure, consult a professional. |
Image: Instructions on how to adjust the arm tension using an Allen wrench. Turn counter-clockwise for heavier displays and clockwise for lighter displays, with a maximum display weight of 44 pounds.
Specificații
- Număr de model: MI-442
- Marca: Mount-It!
- Material: Oțel aliat
- Culoare: Negru
- Tip de montare: Montare pe perete
- Tip de mișcare: Articulând
- Dimensiuni de ecran compatibile: 25 to 47 Inches (Maximum Compatible Size: 47 Inches, Minimum Compatible Size: 25 Inches)
- Capacitate maximă de greutate: 44 lbs
- Compatibilitate VESA: 100x100, 200x100, 200x200, 300x300, 400x200, 400x400 mm
- Unghi maxim de înclinare: 30 de grade
- pivotare: Over 180 degrees
- Reglarea înălțimii: Până la 13.5 inci
- Extensia brațului: 2.5 inches (min) to 21 inches (max)
- Dimensiuni produs: 19.8 x 15.8 x 3.8 inci
- Greutatea articolului: 11.11 lire sterline
Image: Detailed dimensional drawing of the Mount-It! TV mount, showing arm lengths, wall plate size, and overall extension.
Garanție și suport
Mount-It! products are designed for durability and performance. For warranty information or technical support, please visit the official Mount-It! website-ul lor web sau contactați departamentul de asistență pentru clienți. Păstrați bonul fiscal pentru reclamații în garanție.
Informații de contact: Refer to the product packaging or the official Mount-It! website-ul pentru cele mai recente detalii de asistență.
