AMS F5266/18 Modern Radio Pendulum Wall Clock User Manual

Introducere

This manual provides detailed instructions for the setup, operation, and maintenance of your AMS F5266/18 Modern Radio Pendulum Wall Clock. Please read this guide thoroughly to ensure proper use and longevity of your clock.

Produs terminatview

The AMS F5266/18 is a radio-controlled pendulum wall clock featuring a modern design with a beech wood back panel and a golden metallic face. Its radio function ensures accurate timekeeping by automatically synchronizing with a time signal.

Figure 1: AMS F5266/18 Modern Radio Pendulum Wall Clock. This image displays the clock's design, including its light beech wood back panel, golden metallic face with black Arabic numerals, and a matching golden pendulum.

Caracteristici cheie:

Radio-controlled time synchronization for precision.
Elegant design with a veneered beech wood back panel.
Aluminum numeric ring and front tire.
Functional pendulum movement.
Manufactured in Germany, ensuring quality craftsmanship.

Instrucțiuni de configurare

Despachetarea: Carefully remove the clock from its packaging. Inspect for any damage.
Instalare baterie: Locate the battery compartment on the back of the clock. Insert one (1) AA battery, ensuring correct polarity (+/-).
Pendulum Installation: Gently attach the pendulum to its designated hook or slot, typically located below the clock mechanism. Ensure it hangs freely.
Montare: Choose a suitable wall location. The clock should be hung securely using appropriate wall anchors and screws (not included). Ensure the clock is level for optimal pendulum operation.
Initial Time Synchronization: After battery installation, the clock will automatically search for the radio time signal. This process may take several minutes. Place the clock near a window or in an area with good signal reception for faster synchronization. The hands will move to 12:00 and then adjust to the correct time once the signal is received.

Instrucțiuni de operare

Your AMS F5266/18 clock is designed for automatic operation once set up correctly.

Setare automată a orei: The clock continuously monitors the radio time signal to maintain accurate time. It will automatically adjust for Daylight Saving Time (DST) changes.
Pendulum Movement: Once the clock is running, gently start the pendulum swinging. It will continue to swing as part of the clock's aesthetic and mechanical design.

Întreţinere

Înlocuire baterie: Replace the AA battery annually or when the clock hands stop moving or the time becomes inaccurate. Use a fresh, high-quality alkaline battery.
curatenie: Dust the clock regularly with a soft, dry cloth. For the metallic and wooden surfaces, a slightly damp Se poate folosi o lavetă uscată, urmată imediat de o lavetă uscată. Evitați substanțele de curățare abrazive sau solvenții.
Mediu: Keep the clock away from direct sunlight, extreme temperatures, and high humidity to prevent damage to the wood and internal components.

Depanare

Problemă	Cauza posibila	Soluţie
Clock does not start or stops.	Baterie descărcată sau instalată incorect.	Verificați polaritatea bateriei. Înlocuiți-o cu o baterie AA nouă.
Clock does not set correct time.	Recepție slabă a semnalului radio.	Move the clock to a location with better signal reception, ideally near a window. Allow several minutes for synchronization.
Pendulum does not swing.	Pendulum not properly installed or obstructed.	Ensure the pendulum is correctly hooked and swings freely without touching the clock casing. Gently initiate the swing.
Clock makes a subtle ticking sound.	Normal mechanical operation.	This is a characteristic of the clock's movement and is not a defect.

Specificații

Model: F5266/18
Marca: AMS
Dimensiuni (L x A x A): 22 cm x 62 cm x 8 cm
Greutate: 1.2 kilograme
Material: Beech Wood (veneered back panel), Aluminum (numeric ring, front tire)
Sursa de alimentare: 1 x baterii AA (nu sunt incluse)
Tip de afișare: Analogic
Caracteristica speciala: Timp controlat prin radio
Origine: Fabricat in Germania

Garanție și suport

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. You may also visit the official AMS website pentru asistență suplimentară.

	AMS Wall Clock Operating Instructions Operating instructions for AMS wall clocks, covering battery installation, replacement, and general usage in multiple languages.
	ams AS5600L Adapter Board Eval Kit Manual This manual provides comprehensive information for the ams AS5600L-WL_EK_AB adapter board, including kit contents, board description, mounting instructions, pinout details, I2C mode operation, hardware schematics, PCB layout, and ordering information.
	ams AS5048 14-bit Rotary Position Sensor User Manual This user manual provides detailed information on the ams AS5048, a 14-bit rotary position sensor with digital angle and PWM output. It covers the AS5048 adapter board, mounting, pinout, operation cases (SPI, Daisy Chain), firmware coding examples, and hardware schematics. Essential for engineers integrating this sensor into their systems.
	ams AS5048 Adapter Board Evaluation Kit Manual This manual details the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. It covers hardware, operation modes (SPI, I2C), software examples, and contact information for ams AG.
	AMS Clock Operating Instructions and Battery Replacement Guide Instructions for operating and replacing the battery in AMS clocks, with multilingual guidance.
	ams AS5048 Adapter Board Evaluation Kit Manual User manual for the ams AS5048 Adapter Board Evaluation Kit (AS5048-EK-AB), detailing its features, pinout, mounting, operation cases (SPI modes), hardware schematics, PCB layout, and contact information.

AMS F5266/18