1. Introducere
Thank you for choosing the BAZZ Series 400 Recessed Trim Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Image 1.1: BAZZ Series 400 Recessed Trim Light packaging. The packaging displays the product, model numbers (401-R30, 400-R30, 400-CFL), and highlights a 3-year warranty.
2. Informații de siguranță
AVERTIZARE: To avoid electric shock, always shut off the power to the service leads at the circuit breaker or fuse box before proceeding with any connections or installation. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Asigurați-vă că toate conexiunile electrice sunt sigure și respectă codurile electrice locale.
- Nu depășiți puterea maximătage specificat pentru tipul de bec.
- This product is designed for interior and exterior soffit applications.
- Țineți copiii și animalele de companie departe de zona de instalare.
3. Conținutul pachetului
Please verify that all components are present before installation:
- 1 x Series 400 Recessed Trim Light (Model 401-R30)
- Mounting hardware (pre-attached housing clips)
Notă: Becul nu este inclus.
4. Configurare și instalare
Urmați cu atenție acești pași pentru o instalare corectă:
- Pregătiți zona de instalare: Ensure the power is OFF at the circuit breaker. The required installation hole diameter is 4 1/2 inches (11.43 cm).
- Conexiuni electrice:
- Connect the black (live) wire from your household wiring to the colored wire from the fixture.
- Connect the white (neutral) wire from your household wiring to the white wire from the fixture.
- Connect the bare copper (ground) wire from your household wiring to the bare copper wire from the fixture.
- The use of a wire clip (not included) is recommended for securing connections.
- Ensure all connections conform to the electrical code of your region.
- Install the Trim Light:
- Remove the decorative baffle from the fixture if present.
- While holding the fixture with one hand, insert the three housing clips into the T-side slots of the installation hole.
- Using the tip of a finger, push down each clip one by one along the slots until they sit firmly on the opposite surface of the ceiling.
- Inserați becul: Install a 75W BR30 max bulb or a 15W CFL bulb (not included) into the socket.
Image 4.1: Back of product packaging detailing electrical connections and installation steps with diagrams. It also specifies the 4 1/2 inch installation hole and compatible bulb types (R30 75W, CFL 15W).
5. Instrucțiuni de utilizare
Once installed and the bulb is inserted, the BAZZ Series 400 Recessed Trim Light operates via a standard wall switch connected to the circuit. Simply toggle the wall switch to turn the light ON or OFF.
6. Întreținere
To ensure the longevity and optimal performance of your recessed trim light, follow these maintenance guidelines:
- curatenie: Disconnect power before cleaning. Wipe the trim with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Înlocuire bec: Ensure power is OFF before replacing the bulb. Allow the bulb to cool completely before touching. Replace with a bulb of the same type and wattage (75W BR30 max or 15W CFL).
- Inspecţie: Verificați periodic cablajul și conexiunile pentru a depista orice semne de uzură sau deteriorare. Dacă găsiți probleme, consultați un electrician calificat.
7. Depanare
If your recessed trim light is not functioning correctly, refer to the following common issues and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde. | Nicio putere la corp. | Check the circuit breaker or fuse. Ensure the wall switch is ON. |
| Cablare slăbită sau incorectă. | Turn off power at the breaker. Recheck all electrical connections. | |
| Bec defect. | Înlocuiți becul cu unul nou de tipul și puterea corectetage. | |
| Lumina pâlpâie. | Bec sau conexiune slăbită. | Ensure the bulb is screwed in tightly. Check wiring connections. |
| Variator de intensitate incorect (dacă este cazul). | Ensure the dimmer switch is compatible with the bulb type. |
Dacă problema persistă după încercarea acestor soluții, vă rugăm să contactați serviciul de asistență pentru clienți sau un electrician calificat.
8. Specificații
| Marca | BAZZ |
| Numărul de model | 401-R30 |
| Tip de produs | Lumină încastrată cu finisaj |
| Termina | White Baffle |
| Numărul de lumini | 1 |
| Bulb Type (Max) | 75W BR30 or 15W CFL (not included) |
| Dimensiuni de deschidere | 4.50'' W x 4.50'' D (11.43 cm diameter) |
| Dimensiuni de tăiere | 5.62'' W x 5.62'' D |
| Dimensiuni generale | 5.25'' H x 5.63'' W |
| Greutate | 0.52 lbs |
| Aplicație | Interior and exterior soffit |
| ASIN | B009EU63JO |
| Prima disponibilă | 30 ianuarie 2017 |
9. Garanție și asistență
The BAZZ Series 400 Recessed Trim Light comes with a 3 an garanție de la data achiziției, acoperind defectele de materiale și de fabricație în condiții normale de utilizare. Vă rugăm să păstrați dovada achiziției pentru reclamațiile în garanție.
For technical support, warranty inquiries, or replacement parts, please contact BAZZ customer service. You can find contact information on the BAZZ official website-ul web sau prin intermediul distribuitorului dumneavoastră.
Producător: BAZZ INC.
797, St-Rene, Montreal, QC Canada H4C 3G9
