Fluke 355 True RMS Clamp-Manual de utilizare al contorului

Introducere

The Fluke 355 digital clamp-meter is a true RMS sensing, auto-ranging multimeter designed for precise measurement of current, voltage, frequency, and resistance in various electrical testing applications. It features a robust clamp mechanism for non-contact current measurement and a comprehensive set of functions for professional use, ensuring accurate readings for both linear and non-linear loads.

Informații de siguranță

Always adhere to safety precautions when working with electrical equipment. This device is designed to meet IEC safety standard 61010-2-032.

• CAT IV, 600V: Suitable for measurements at the source of the low-voltage installation, such as electricity meters and primary over-current protection equipment.
• CAT III, 1,000V: Suitable for measurements within fixed installations, including switches and industrial equipment permanently connected to the fixed installation.

Ensure proper personal protective equipment (PPE) is used, and always follow local safety regulations when operating this device.

Ce este în cutie

Your Fluke 355 Clamp-Meter package includes the following components:

• Fluke 355 digital clamp-metru
• Set cabluri de testare
• Set sondă de testare
• Set de cleme de aligator
• (6) Baterii AA
• Geanta moale de transport
• Manual de utilizare

Image: All components included with the Fluke 355 Clamp-Meter, neatly arranged.

Caracteristicile produsului

• Sensare RMS adevărată: Provides accurate readings for both linear and non-linear loads, regardless of waveform.
• High Current Measurement: Measures AC and DC current up to 2,000A (1,400A AC RMS).
• Deschidere mare a maxilarului: 58mm (2.3 inches) jaw opening accommodates large or multiple conductors for non-contact current measurement.
• Voltage Măsurare: Măsuri AC voltage până la 600V și DC voltage până la 1,000V.
• Frequency and Resistance: Measures frequency up to 1kHz and resistance up to 400kΩ.
• Inrush Current Function: Analyzes surge current during motor startup and other inductive loads for stable measurements.
• Filtru trece-jos: Reduces high-frequency interference for accurate measurements of complex waveforms.
• Min/Max Function: Toggles to display lowest, highest, and average readings.
• Păstrarea datelor: Freezes the reading on the display for easy documentation in tight spaces.
• Buzzer de continuitate: Confirms electrical continuity.
• LCD iluminat din spate: Improves visibility in low-light conditions, with automatic backlight shut-off.
• Oprire automată: Conserves battery life by automatically turning off after 20 minutes of non-use.
• Indicator de baterie scăzută: Signals when batteries need replacement.

Înființat

Instalarea bateriei

The Fluke 355 requires six 1.5V AA batteries for operation. These are typically included with your purchase.

1. Localizați capacul compartimentului bateriei pe spatele dispozitivului.
2. Folosiți o șurubelniță pentru a deschide capacul.
3. Insert the six AA batteries, ensuring correct polarity (+/-).
4. Puneți la loc capacul compartimentului bateriei și fixați-l.

Inspecția inițială

Înainte de prima utilizare, verificați clema.amp-meter, test leads, and accessories for any signs of damage. Do not use the device if any damage is observed.

Instrucțiuni de operare

Pornire/Oprire

Turn the rotary switch to any measurement function to power on the device. Turn the rotary switch to "OFF" to power off. The device will automatically power off after 20 minutes of inactivity to conserve battery life.

Măsurarea curentului AC/DC (Clamp Funcţie)

1. Turn the rotary switch to the "A AC+DC" position.
2. Press the jaw release lever to open the clamp fălci.
3. Poziționați clamp jaws around a single conductor. Ensure the jaws are fully closed.
4. Citiți valoarea curentă pe ecranul LCD.

Imagine: Cl.amp jaws of the Fluke 355 securely closed around an electrical conductor for current measurement.

Măsurarea Voltage (AC/DC)

1. Connect the test leads to the appropriate input jacks (COM and V).
2. Turn the rotary switch to the "V AC+DC" position.
3. Conectați sondele de testare la circuitul sau componenta care urmează să fie măsurată.
4. Citiți voltagValoarea e pe ecranul LCD.

Measuring Resistance (Ω)

1. Connect the test leads to the appropriate input jacks (COM and Ω).
2. Rotiți comutatorul rotativ în poziția „Ω”.
3. Asigurați-vă că circuitul este dezactivat înainte de a măsura rezistența.
4. Conectați sondele de testare la componenta care urmează să fie măsurată.
5. Citiți valoarea rezistenței pe ecranul LCD.

Alte funcții

• GAMĂ: Manually select the measurement range if auto-ranging is not desired.
• ȚINEȚI: Apăsați pentru a îngheța valoarea curentă de pe afișaj. Apăsați din nou pentru a o elibera.
• ZERO: Used to zero out DC current readings or resistance readings for lead compensation.
• Hz: Măsoară frecvența.
• INRUSH: Measures the peak current during motor startup.
• MIN MAX: Toggles through minimum, maximum, and average readings captured during a measurement session.
• FILTRA: Activates a low-pass filter to reduce electrical noise for stable readings.

Imagine: Detaliată view of the Fluke 355 Clamp-Meter's display and control panel.

Întreţinere

Curatenie

Curățați contorul casing cu anunțamp o lavetă și un detergent blând. Nu utilizați abrazivi sau solvenți. Păstrați afișajul curat și uscat.

Înlocuirea bateriei

When the low-battery indicator appears on the display, replace all six AA batteries promptly to ensure accurate measurements. Follow the battery installation steps outlined in the Setup section.

Depozitare

Păstrați clamp-meter in its soft carrying case in a dry, dust-free environment when not in use. Remove batteries if storing for extended periods to prevent leakage.

Depanare

If the Fluke 355 Clamp-Meter is not functioning as expected, consider the following:

• Fără afișaj/alimentare: Check if the batteries are correctly installed and have sufficient charge. Replace batteries if necessary. Ensure the rotary switch is not in the "OFF" position.
• Citiri inexacte: Verify that the correct measurement function is selected. Ensure test leads are properly connected and not damaged. For current measurements, ensure the clamp fălcile sunt complet închise în jurul unui singur conductor.
• Buzzerul de continuitate nu funcționează: Ensure the device is in the continuity measurement mode and the circuit is de-energized.

For persistent issues, refer to the official Fluke support resources or contact customer service.

Specificații

Garanție și suport

Fluke Corporation provides high-quality testing tools. For warranty information, technical support, or service, please visit the official Fluke website-ul sau contactați departamentul de servicii pentru clienți.

Puteți găsi mai multe informații și resurse de asistență la Magazinul Fluke pe Amazon.