1. Introducere
Thank you for choosing Alpine SXE-1750S 6.5-inch Component 2-Way Car Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your new car audio system. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and safety.
2. Informații de siguranță
- Instalare profesională recomandată: Car audio installation can be complex. If you are unsure about any step, it is highly recommended to seek assistance from a qualified professional installer.
- Deconectați bateria: Always disconnect the vehicle's negative battery terminal before starting any electrical work to prevent short circuits and damage.
- Cablaj: Ensure all wiring is correctly connected and insulated to prevent electrical shorts, fire hazards, and damage to the speakers or vehicle's electrical system.
- Montare: Montați în siguranță toate componentele pentru a preveni slăbirea lor în timpul funcționării vehiculului, ceea ce ar putea provoca vătămări corporale sau daune.
- Evitați apa și umezeala: Nu expuneți difuzoarele la apă sau umiditate excesivă.
- Niveluri de volum: Expunerea prelungită la niveluri ridicate de volum poate provoca afectarea auzului. Reglați volumul la un nivel sigur și confortabil.
3. Conținutul pachetului
Verificați dacă toate articolele sunt prezente în colet:
- 2 x 6.5-inch Woofers
- 2 x Tweetere
- 1 x Flange (for mounting)
- 4 x șuruburi (pentru montare)
This image displays the Alpine SXE-1750S component speaker system, featuring two 6.5-inch woofers with silver cones and black surrounds, alongside two separate black dome tweeters. These components are designed for flexible installation in a vehicle's interior.
4. Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Tip difuzor | Component, 2-Way |
| Diametrul wooferului | 6.5 inchi |
| Diametrul tweeterului | 2.54 de centimetri |
| RMS Power (per pair) | 45 wați |
| Peak Power (per pair) | 560 wați |
| Raspuns in frecventa | 60 Hz - 20,000 Hz |
| Sensibilitate | 90 dB |
| Impedanta | 4-ohmi |
| Adâncimea de montare | 46.5 mm |
| Dimensiunile produsului | 18" D x 9" L x 2" H |
| Greutatea articolului | 1.5 lire sterline |
| Tehnologia de conectivitate | Cablat |
5. Configurare și instalare
This section outlines the general steps for installing your Alpine SXE-1750S speakers. Specific vehicle requirements may vary.
5.1 Lista de verificare înainte de instalare
- Citiți în întregime acest manual.
- Gather all necessary tools (screwdrivers, wire strippers, drill, etc.).
- Ensure you have appropriate speaker wire and connectors.
- Deconectați borna negativă a bateriei vehiculului.
5.2 Mounting the Woofers
- Identify suitable mounting locations in your vehicle (typically door panels). Ensure there is sufficient depth (46.5mm) and clearance.
- Carefully remove existing speakers or trim panels.
- Use the provided screws to secure the 6.5-inch woofers into the mounting locations. Ensure a tight fit to prevent vibrations.
5.3 Mounting the Tweeters
The component design allows for flexible tweeter placement to optimize sound imaging.
- Choose a location for the tweeters, such as dashboard corners, A-pillars, or near the woofers, ensuring they are aimed towards the listening position.
- Depending on your chosen location, you may need to flush mount or surface mount the tweeters using the provided flange or custom brackets.
- Secure the tweeters firmly.
5.4 Conexiuni de cablare
The Alpine SXE-1750S speakers are designed as a 2-way component system. Note that this model does not include an external passive crossover network, meaning the woofers and tweeters are intended to be wired directly to the amplifier or head unit outputs, or you may choose to integrate an external crossover if desired.
- Identificați polaritatea: Ensure correct positive (+) and negative (-) connections for both woofers and tweeters. Incorrect polarity will result in poor sound quality.
- Connect Woofers: Connect the woofer wires to the corresponding speaker outputs from your head unit or ampmai în viață.
- Connect Tweeters: Connect the tweeter wires to the corresponding speaker outputs. If your head unit or amplifier has built-in high-pass filters, it is recommended to use them for the tweeters to protect them from low frequencies.
- Cablare sigură: Route all speaker wires safely, away from moving parts, sharp edges, and heat sources. Use zip ties or electrical tape to secure them.
- Verificați din nou conexiunile: Verificați de două ori toate conexiunile înainte de a reconecta bateria.
5.5 După instalare
- Reconectați borna negativă a bateriei vehiculului.
- Test the speakers with your audio system.
- Adjust audio settings (balance, fader, bass, treble) on your head unit or amplifier for optimal sound.
6. Funcționare
Once installed, your Alpine SXE-1750S speakers will reproduce audio from your car's head unit or amplifier. The operation of the speakers themselves is passive; their performance is directly influenced by the quality of the audio source and amplificare.
- Sursa audio: Play audio from your preferred source (radio, CD, USB, Bluetooth, etc.).
- Controlul volumului: Adjust the volume using your head unit. Avoid excessively high volumes that cause distortion, as this can damage the speakers.
- Comenzi de ton: Use the bass, treble, and other tone controls on your head unit or amplifizer pentru a regla fin sunetul conform preferințelor dumneavoastră.
- Fader / echilibru: Adjust the fader (front-to-rear) and balance (left-to-right) controls to achieve an even sound stagîn vehiculul dumneavoastră.
7. Întreținere
Întreținerea corectă asigură longevitatea și performanța difuzoarelor dumneavoastră.
- curatenie: Use a soft, dry cloth to gently wipe dust from the speaker cones and grilles. Do not use harsh chemicals, solvents, or abrasive cleaners.
- Evitați umezeala: Keep speakers dry. If they get wet, allow them to air dry completely before use.
- Inspectați conexiunile: Verificați periodic conexiunile cablurilor pentru a vă asigura că acestea rămân fixe și fără coroziune.
- Protejați împotriva daunelor: Evitați așezarea obiectelor grele pe difuzoare sau expunerea lor la lumina directă a soarelui pentru perioade lungi de timp, deoarece acestea pot degrada materialele.
8. Depanare
Dacă întâmpinați probleme cu difuzoarele, consultați următoarele probleme și soluții frecvente:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Fără sunet din difuzoare | Cablare slăbită sau incorectă; Unitate principală/amplifier off or muted; Blown fuse in head unit/amplifier; Damaged speaker. | Check all wiring connections for proper polarity and security; Ensure head unit/amplifier is on and not muted; Check and replace fuses if necessary; Test with another known-good speaker to isolate the issue. |
| Sunet distorsionat sau neclar | Volume too high; Incorrect tone settings; Loose mounting; Damaged speaker cone/surround; Insufficient power from head unit/ampmai în viață. | Reduce volume; Adjust bass/treble settings; Ensure speakers are securely mounted; Inspect speaker for physical damage; Consider adding an external amplifier pentru mai multă putere. |
| Un difuzor nu funcționează | Loose or incorrect wiring for that specific speaker; Damaged speaker. | Check wiring for the non-working speaker; Swap the non-working speaker with a working one (if possible) to determine if the speaker itself is faulty. |
| Static or buzzing noise | Poor grounding; Interference from other electrical components; Damaged wiring. | Ensure head unit and amplifier have proper, clean grounds; Reroute speaker wires away from power cables or other electronics; Inspect wiring for damage. |
9. Garanție și asistență
Alpine provides a limited warranty for the SXE-1750S speakers. Please retain your proof of purchase for warranty claims.
- Acoperire garanție: The specific terms and duration of the limited warranty are provided with your product documentation. This typically covers defects in materials and workmanship under normal use.
- Excluderi: The warranty generally does not cover damage caused by improper installation, abuse, accidents, unauthorized modifications, or normal wear and tear.
- Asistență clienți: For technical assistance, warranty service, or further information, please contact Alpine customer support through their official website-ul sau informațiile de contact furnizate pe ambalajul produsului.
