CyberPower CP1350PFCLCD PFC Sinewave UPS Instruction Manual

1. Produs terminatview

The CyberPower CP1350PFCLCD is a mini-tower Uninterruptible Power Supply (UPS) system designed to provide battery backup and surge protection. It features sine wave output, making it compatible with active Power Factor Correction (PFC) and conventional power supplies. This unit safeguards desktop computers, workstations, networking devices, and home entertainment systems from power fluctuations and outages. An advanced multifunction color LCD panel provides real-time status and alerts, with a tilt feature for optimal viewing.

The UPS incorporates Automatic Voltage Regulation (AVR) to stabilize incoming utility power, correcting minor voltage fluctuations without engaging the battery, thereby extending battery life.

Figura 1: Față view of the CyberPower CP1350PFCLCD UPS, showing the LCD display and control buttons.

2. Configurare

2.1 Despachetarea și inspecția inițială

Carefully remove the UPS from its packaging. Inspect the unit for any signs of damage. Ensure all components, including the power cord and user manual, are present.

2.2 Conectarea bateriei

The UPS battery may be disconnected for shipping. To connect the battery:

1. Locate the battery compartment cover, typically at the bottom or side of the unit.
2. Remove the cover by sliding it or unscrewing retaining screws.
3. Connect the internal battery cables (red to red, black to black) as indicated. Ensure connections are secure.
4. Înlocuiți capacul compartimentului bateriei.

2.3 Conectarea la sursa de alimentare și la dispozitive

Plug the UPS power cord into a grounded wall outlet. Connect your computer, monitor, and other critical equipment to the battery backup and surge-protected outlets on the rear of the UPS. Non-critical devices can be connected to surge-only outlets.

Figura 2: Spate view of the UPS, showing 12 NEMA 5-15R outlets (six battery backup & surge protected, six surge protected), network ports, USB, and serial port.

3. Instrucțiuni de utilizare

3.1 Pornire/Oprire

To power on the UPS, press and hold the power button on the front panel until the LCD screen illuminates. To power off, press and hold the power button again until the display turns off.

3.2 Afișaj LCD și comenzi

Panoul LCD color multifuncțional afișează informații în timp real despre starea UPS-ului. Folosiți butonul „AFIȘARE” pentru a parcurge diverse ecrane, inclusiv:

• Vol. De intraretage: Shows the incoming utility power voltage.
• Ieșire Voltage: Afișează volumultage supplied by the UPS to connected devices.
• Capacitate baterie: Indicates the current charge level of the battery.
• Sarcina curenta: Shows the power consumption of connected devices.
• Timp de rulare estimat: Provides an approximation of how long the UPS can power connected devices during an outage.
• Jurnal de evenimente: Records power events such as outages sau supratensiuni.

The screen can be tilted up to 22 degrees for better viewunghiuri de ing.

Figure 3: Close-up of the LCD panel displaying various status icons and real-time data.

3.3 Automatic VoltagRegulamentul (AVR)

The UPS automatically activates AVR to correct minor voltage fluctuations (sags or surges) without switching to battery power. This ensures a stable power supply to your devices and prolongs battery life.

3.4 porturi de încărcare USB

The front panel includes USB-A and USB-C ports for convenient charging of mobile devices, even during a power outage.

4. Întreținere

4.1 Înlocuirea bateriei

Over time, UPS batteries will degrade and require replacement. The CP1350PFCLCD uses two 12V sealed lead-acid batteries. The LCD panel may display an error code (e.g., E21) or a 'REPLACE' icon when the battery needs attention.

Procedure for Battery Replacement:

1. Asigurați-vă că sursa UPS este oprită și deconectată de la priza de perete.
2. Remove the battery compartment cover (usually secured by two Phillips screws).
3. Carefully disconnect the battery terminals (red and black) from the old batteries. Note the orientation for proper re-connection.
4. Remove the old batteries. They may be snug and require gentle nudging.
5. Insert the new batteries, ensuring they fit correctly.
6. Connect the new battery terminals (red to red, black to black). A small spark may occur during the final connection; this is normal.
7. Replace the battery compartment cover and secure it with screws.

For a visual guide on battery replacement, refer to the official product video below:

4.2 Îngrijire generală

Keep the UPS in a well-ventilated area, free from dust and moisture. Avoid placing it near heat sources. Regularly check for any loose connections or signs of wear.

5. Depanare

If your UPS is not functioning as expected, refer to the following common issues:

6. Specificații

• Model: CP1350PFCLCD
• Capacitate: 1350VA / 880W
• Topologie: Line Interactive with PFC Sinewave Output
• Prize: 12 NEMA 5-15R (6 Battery Backup & Surge Protected, 6 Surge Protected)
• Vol. De intraretage: 120 volți
• Tip baterie: Baterie plumb-acid sigilată (incluse 2 baterii de 12V)
• Vol. AutomattagRegulamentul (AVR): Da
• Afişa: Multifunction Color LCD Panel
• Dimensiuni: 14.2 x 3.9 x 10.4 inci
• Greutatea articolului: 20.3 lire sterline

7. Garanție și asistență

The CyberPower CP1350PFCLCD comes with a garanție de trei ani, care include acoperire pentru baterii. În plus, este susținut de o Garanție de 425,000 USD pentru echipamente conectate, oferind liniște sufletească pentru dispozitivele electronice conectate.

For further support, troubleshooting, or warranty claims, please visit the official CyberPower website-ul sau contactați serviciul pentru clienți.