Manual de instrucțiuni pentru priza electrică Forney 58402

1. Produs terminatview

The Forney 58402 is a heavy-duty Bakelite pin-type wall electrical receptacle designed for surface mounting. It features a 2-pole/3-wire grounding configuration, suitable for high-power applications. This receptacle is rated for 50 Amps at 125/250 Volts and conforms to NEMA 6-50 standards.

Caracteristici cheie:

• Heavy duty Bakelite pin-type design for durability.
• Wall electrical receptacle for surface mounting.
• 2-pole/3-wire grounding for enhanced safety.
• 50 Amp with 125/250-Volt capacity.
• NEMA 6-50 electrical configuration.

Figura 1: Față view of the Forney 58402 Electrical Receptacle, showing the pin configuration and voltage/ampevaluări erage.

2. Informații de siguranță

AVERTIZARE: Electrical work can be hazardous. Always disconnect power at the circuit breaker or fuse box before installing, servicing, or removing this receptacle. Failure to do so may result in serious injury or death. If you are unsure about any part of these instructions, consult a qualified electrician.

• Asigurați-vă că sunt respectate toate codurile electrice locale și naționale.
• Folosiți echipament individual de protecție (EIP) adecvat, cum ar fi mănuși izolante și ochelari de protecție.
• Verificați voltage și amperage of your circuit match the receptacle's ratings (50A, 125/250V).
• Do not use this receptacle if it appears damaged.
• Țineți copiii departe de instalațiile electrice.

3. Configurare și instalare

This section provides general guidelines for installing the Forney 58402 wall receptacle. Specific wiring configurations may vary based on local codes and existing electrical systems.

Instrumente și materiale necesare:

• Șurubelnițe (Phillips și Flathead)
• Stripteuze sârmă
• Voltage tester
• Mounting screws (appropriate for surface)
• Electrical box (if not already present)

Pașii de instalare:

1. Deconectați alimentarea: Locate the circuit breaker or fuse controlling the circuit where the receptacle will be installed and turn it OFF. Verify power is off using a voltage tester.
2. Pregătiți suprafața de montare: Ensure the surface is clean, dry, and structurally sound. The receptacle is designed for surface mounting.
3. Mount the Receptacle Base: Position the receptacle base on the desired surface. Use appropriate mounting screws to secure it firmly. The back of the receptacle features pre-drilled holes for this purpose.


Figura 2: Spate view of the Forney 58402 Receptacle, showing the metal mounting plate and screw holes for surface installation.

4. Conexiuni prin cablu: This receptacle is a 2-pole/3-wire grounding type (NEMA 6-50). It typically requires two hot wires (L1, L2) and one ground wire.
• Strip approximately 1/2 inch of insulation from each wire.
• Connect the L1 (Hot) wire to one of the brass-colored terminals.
• Connect the L2 (Hot) wire to the other brass-colored terminal.
• Connect the Ground wire (typically green or bare copper) to the green hexagonal grounding screw.


Figura 3: De jos view of the Forney 58402 Receptacle, illustrating the internal wiring access points and terminals.

5. Cablare sigură: Ensure all wire connections are tight and secure. No bare wire should be exposed outside the terminals.
6. Reasamblați: Carefully place the cover over the wired base and secure it with the provided screws.
7. Restabiliți puterea: Once installation is complete and verified, turn the power back ON at the circuit breaker or fuse box.

4. Instrucțiuni de utilizare

The Forney 58402 Electrical Receptacle is designed for straightforward operation.

1. Verificați compatibilitatea: Ensure the plug of your electrical device is compatible with the NEMA 6-50 configuration of this receptacle.


Figura 4: Prim-plan view of the Forney 58402 Receptacle's pin configuration, showing the 50A 250V markings.

2. Introduceți ștecherul: Align the pins of your device's plug with the slots on the receptacle and firmly insert the plug.
3. Scoateți ștecherul: To disconnect, grasp the plug firmly and pull it straight out from the receptacle. Do not pull by the cord.

5. Întreținere

Regular inspection and basic maintenance will help ensure the longevity and safe operation of your Forney 58402 receptacle.

• Inspectie periodica: Annually inspect the receptacle for any signs of damage, cracks, discoloration, or loose connections.
• curatenie: With power disconnected, gently wipe the exterior of the receptacle with a dry, clean cloth to remove dust or debris. Do not use liquid cleaners.
• Strângeți conexiunile: If comfortable and with power disconnected, periodically check and tighten the terminal screws to ensure secure wire connections.
• Protecția mediului: Dacă este instalat în reclamăamp or dusty environment, ensure the receptacle is adequately protected from moisture and excessive dust accumulation.

6. Depanare

If you experience issues with your Forney 58402 receptacle, consider the following common troubleshooting steps:

If troubleshooting steps do not resolve the issue, or if you are unsure, contact a qualified electrician.

7. Specificații

8. Garanție și asistență

Specific warranty details for the Forney 58402 Electrical Receptacle are not provided in this manual. For warranty information, technical support, or service inquiries, please refer to the product packaging or contact Forney customer service directly.

You may visit the official Forney website pentru informații de contact și resurse suplimentare: www.forneyind.com