Introducere
The FLIR i7 Compact Infrared Thermal Imaging Camera is a non-invasive monitoring and diagnostic tool designed to detect temperature variations. It is suitable for identifying potential electrical and mechanical failures, insulation issues, and moisture problems. Its compact size and intuitive operation make it an accessible tool for various applications, from home inspections to industrial maintenance.
Caracteristici cheie
- Pocket-sized and fully automatic design for ease of use.
- High thermal sensitivity of 0.1°C for precise problem detection.
- Focus-free lens for convenient viewing.
- High-resolution 2.8-inch color LCD screen.
- Multiple measurement modes: Spot (center), area (min/max), and isotherm (above/below).
- Storage capacity for up to 5,000 radiometric JPEG images on a 512 MB microSD card.
- Rechargeable lithium-ion battery providing over four hours of continuous use.
- Rugged, double-molded design meeting IP43 dust/splash proof standards.
- Includes QuickReport PC software for image analysis and report generation.
Înființat
Despachetarea și inspecția inițială
Carefully unpack all components from the hard carrying case. Verify that all items listed in the "What's in the Box" section are present and undamaged.
Figure 1: FLIR i7 camera and accessories neatly packed in its protective hard carrying case.
Încărcarea bateriei
Before first use, fully charge the included lithium-ion battery. The charger can be plugged directly into the camera for convenience. A full charge provides over four hours of operation.
Introducerea cardului MicroSD
Locate the microSD card slot, typically protected by a rubber flap. Insert the provided 512 MB microSD card into the slot until it clicks into place. This card is essential for saving images.
Instrucțiuni de operare
Pornire/Oprire
Press and hold the power button (usually located near the display) to turn the camera on or off. The camera will perform a brief self-check upon startup.
Figura 2: Față view of the FLIR i7 camera with its display showing a thermal image.
Basic Operation and Display
The FLIR i7 features intuitive one-handed operation. Point the camera towards the area of interest. The 2.8-inch LCD color screen will display the thermal image in real-time. The camera has a focus-free lens, simplifying operation.
Figura 3: lateral view of the FLIR i7, highlighting its ergonomic design.
Moduri de măsurare
The camera offers three primary display measurement modes:
- Spot (center): Afișează temperatura în centrul ecranului.
- Area (min/max): Shows the minimum and maximum temperatures within a defined area.
- Isotherm (above/below): Highlights areas above or below a set temperature threshold.
Custom settings, including locking the temperature range and configuring the preferred color palette, can be adjusted via the camera's menu.
Figure 4: FLIR i7 menu interface for adjusting settings and measurement modes.
Capturing and Storing Images
To capture a thermal image, press the trigger button. The image will be saved automatically to the microSD card in JPEG format. The camera can store up to 5,000 radiometric images. Use the thumbnail gallery feature to quickly browse stored images.
Întreţinere
Curățarea camerei
Ștergeți corpul camerei cu o lavetă moale șiamp cloth. For the lens and screen, use a lens cleaning cloth and solution specifically designed for optics to avoid scratches. Do not use abrasive cleaners or solvents.
Îngrijirea bateriei
To prolong battery life, avoid fully discharging the battery frequently. Store the camera with a partially charged battery if it will not be used for extended periods. Recharge the battery as needed; it can be charged directly in the camera.
Depozitare
When not in use, store the FLIR i7 in its hard carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
Depanare
Camera nu pornește
- Ensure the battery is fully charged. Connect the camera to the AC adapter and allow it to charge for at least 30 minutes before attempting to power on again.
- Verificați dacă bateria este introdusă corect.
Images Are Blurry or Unclear
- Although the i7 has a focus-free lens, ensure there are no obstructions on the lens. Clean the lens with a soft, lint-free cloth if necessary.
- Ensure you are within the optimal measurement distance for the object.
Cannot Save Images
- Check if the microSD card is properly inserted.
- Verify that the microSD card is not full. If it is, transfer images to a computer and delete them from the card, or replace the card.
- Ensure the card is not write-protected (if applicable to the card type).
Software (QuickReport) Issues
- Ensure your computer meets the minimum system requirements for QuickReport software.
- Reinstalați software-ul dacă problemele persistă.
- Refer to the QuickReport software manual for specific troubleshooting steps.
Specificații
| Atribut | Detaliu |
|---|---|
| Producător | Sisteme FLIR |
| Numărul piesei | 60101-0301 |
| Greutatea articolului | 12 uncii |
| Dimensiuni pachet | 15.7 x 12.1 x 5 inci |
| Numărul de model al articolului | FLIR i7 |
| Dimensiune | Compact |
| Culoare | Albastru/gri |
| Stil | Standard |
| Cantitate Pachet Articol | 1 |
| Bateriile incluse? | Da |
| Sunt necesare baterii? | Da |
| ASIN | B003V4BE20 |
| Data primului disponibil | 30 octombrie 2009 |
Ce este în cutie
- FLIR i7 Camera
- Card microSD
- MiniSD adapter
- Baterie reîncărcabilă
- AC adapter with EU, UK, US, and Australian plugs
- QuickReport software (on CD or download link)
- cablu USB
- Curea de mână
- Geantă de transport dur
- CD of Manual and Documentation
Informații despre garanție
The FLIR i7 is backed by a manufacturer's two-year limited warranty on parts and labor. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official FLIR website-ul.
Sprijin
For technical support, service, or additional information, please contact FLIR Systems customer service. Refer to the contact details provided in the product documentation or on the official FLIR website-ul.
