Introducere
The wolfcraft Drill Stand 5027000 is designed to provide controlled and precise drilling for various workpieces. Its robust construction ensures straight drilling without twisting, allowing for accurate depth setting and stable operation. This manual provides essential information for the safe and effective use of your drill stand.
Imagine: față view of the wolfcraft Drill Stand 5027000, showcasing its robust design and main components.
Instrucțiuni de siguranță
Always observe the following safety precautions when operating the drill stand:
- Citiți și înțelegeți toate instrucțiunile înainte de utilizare.
- Purtați echipament individual de protecție (EIP) adecvat, inclusiv ochelari de protecție și protecție auditivă.
- Ensure the drill stand is securely mounted on a stable, level workbench.
- Always secure your workpiece firmly using clamps or a vice to prevent movement during drilling.
- Disconnect the power drill from the mains before making any adjustments or changing drill bits.
- Țineți mâinile și hainele largi departe de părțile mobile.
- Nu forțați burghiul. Lăsați burghiul să lucreze.
- Păstrați zona de lucru curată și bine iluminată.
- Do not operate the drill stand in damp sau condiții umede.
- Store the drill stand in a dry, secure location when not in use.
Conținutul pachetului
Verificați dacă toate componentele sunt prezente la despachetare:
- 1 x wolfcraft Drill Stand 5027000
No additional components are included beyond the drill stand itself.
Configurare și asamblare
Follow these steps to assemble and prepare your drill stand for use:
- Ansamblu bază și coloană: Securely attach the 40 mm round column to the base. Ensure all fasteners are tightened to prevent any movement or instability.
- Mounting the Power Drill: The drill stand features a Euronorm collar with a 43 mm diameter. Insert your power drill into this collar and tighten the clamping mechanism firmly. Ensure the drill is centered and held securely.
- Adjusting the Operating Unit: The operating unit, which holds the power drill, can be adjusted vertically along the toothed rack. Use the rack-and-pinion drive for convenient and precise height adjustment.
- Organizare de cabluri: Utilize the integrated cable holder to route the power cable of your drill, preventing it from interfering with operation or getting damaged.
Image: Dimensional drawing of the wolfcraft Drill Stand 5027000, showing key measurements for setup and workspace planning.
Image: Detail of the cable holder on the drill stand, illustrating proper cable routing for safety and convenience.
Instrucțiuni de operare
To achieve precise and controlled drilling, follow these operational steps:
- Securizarea piesei de lucru: Place your workpiece on the base of the drill stand. Use appropriate clamps or a vice, which can be attached to the clamping grooves on the base, to hold the workpiece firmly in position.
- Adjust Drilling Height: Use the rack-and-pinion drive to adjust the height of the operating unit so that the drill bit is positioned correctly above your workpiece.
- Setați adâncimea de găurire: Utilize the depth stop with its quick adjuster and scale ring. Set the desired drilling depth precisely to the millimeter. This ensures consistent hole depths across multiple operations.
- Initiate Drilling: With the workpiece secured and depth set, activate your power drill. Use the 3-arm feed lever to comfortably lower the operating unit and drill into the workpiece. The return spring will assist in moving the machine back up after drilling.
- Monitorizare și control: Maintain a steady, controlled feed rate. Avoid excessive pressure, which can damage the drill bit or the workpiece.
Image: The drill stand in operation, demonstrating its capability to drill precisely into both a metal pipe and a wooden plank, with workpieces secured by a vice.
Întreţinere
Regular maintenance ensures the longevity and optimal performance of your drill stand:
- curatenie: After each use, clean the drill stand to remove dust, chips, and debris. Use a dry cloth or brush. Avoid using harsh chemicals that could damage the finish.
- Lubrifiere: Periodically apply a light lubricant to the column and rack-and-pinion mechanism to ensure smooth operation.
- Inspecţie: Regularly inspect all fasteners and moving parts for wear or damage. Tighten any loose screws. Replace worn components as necessary.
- Depozitare: Store the drill stand in a clean, dry environment, protected from moisture and extreme temperatures.
Depanare
If you encounter issues with your drill stand, consider the following common solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Drill not moving smoothly up/down | Lack of lubrication, debris in rack, loose components. | Clean the column and rack. Apply lubricant. Check and tighten all assembly screws. |
| Adâncime de găurire inexactă | Depth stop not set correctly, depth stop loose. | Re-adjust the depth stop, ensuring it is securely locked. Verify the scale ring setting. |
| Drill wobbles or is not straight | Power drill not securely clamped, column or base fasteners loose. | Ensure the power drill is tightly secured in the Euronorm collar. Check and tighten all assembly fasteners for the column and base. |
| Workpiece moves during drilling | Workpiece not properly secured. | Folosiți întotdeauna clamps or a vice to firmly hold the workpiece to the base. |
If problems persist, contact wolfcraft customer support.
Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | meșteșugul lupului |
| Numărul de model | 5027000 |
| Sursa de alimentare | Hand-powered (requires external power drill) |
| Maximum Chuck Size (Euronorm Collar) | 43 milimetri |
| Diametrul coloanei | 40 mm |
| Column Length (Toothed Rack) | 420 mm |
| Caracteristici speciale | Precise Drilling, Depth Stop with Quick Adjuster, Scaled Drilling Depth |
| Dimensiuni produs (L x l x H) | 21.65" x 9.65" x 22.87" (aprox. 550 mm x 245 mm x 581 mm) |
| Material | Aluminiu turnat sub presiune |
| Greutatea articolului | 7.98 kilograme (aproximativ 17.56 livre) |
| Capacitate de găurire pentru lemn | 40 milimetri |
| Capacitate de găurire Metal | 10 milimetri |
| UPC | 790295983620, 772040282677 |
garanție
The wolfcraft Drill Stand 5027000 comes with a 10 ani garantie, reflecting the manufacturer's commitment to quality and durability. Please retain your proof of purchase for warranty claims.
Image: Logo indicating a 10-year guarantee for the product.
Suport și Contact
For further assistance, technical support, or warranty inquiries, please contact wolfcraft customer service or visit their official website:
- Producător: Wolfcraft GmbH
- Adresa: Wolffstraße 1, 56746 Kempenich, Germania
- Website: www.wolfcraft.com (Vă rugăm să consultați website pentru informații de contact regionale)
Image: Close-up of the manufacturer's label on the drill stand, showing wolfcraft GmbH contact details.
