SATCO S8667 40W T5 Twin Tube CFL Lamp Manual de utilizare

1. Introducere

This manual provides essential information for the safe installation, operation, and maintenance of your SATCO S8667 40W T5 Twin Tube Compact Fluorescent LampVă rugăm să citiți cu atenție aceste instrucțiuni înainte de utilizare și să le păstrați pentru referințe ulterioare.

Informații de siguranță

• Always disconnect power before installing or replacing the lamp.
• Nu utilizați acest lamp in enclosed fixtures unless specified by the fixture manufacturer.
• Handle with care to avoid breakage. This lamp contains mercury; dispose of properly according to local regulations.
• Ensure the lighting fixture is compatible with a 2G11 base and a 40W fluorescent lamp.

2. Produs terminatview

The SATCO S8667 is a 40-watt Twin Tube Compact Fluorescent Lamp (CFL) designed for general lighting applications. It features a 2G11 lamp base and a T5 shape, providing 3500 lumens of neutral white light at a 3500K color temperature.

Caracteristici cheie:

• Wattage: 40W
• Voltage: 120V
• Tip de bază: 2G11
• Formă: T5 Twin Tube
• Ieșire lumen: 3500 lumeni
• Temperatura de culoare: 3500K (alb neutru)
• Durata medie: 20,000 de ore

Figure 1: SATCO S8667 Twin Tube Compact Fluorescent Lamp. This image illustrates the lamp's twin tube design and 2G11 base connector.

3. Configurare și instalare

1. Deconectare de la curent: Before beginning installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
2. Compatibilitate cu dispozitive: Verify that your lighting fixture is designed for 2G11 base fluorescent lamps and can accommodate a 40W lamp.
3. Lamp Inserare: Carefully align the four pins of the 2G11 base on the SATCO S8667 lamp with the corresponding slots in the fixture's lamp holder. Gently push the lamp into the holder until it is securely seated. Do not force the lamp, deoarece aceasta poate cauza daune.
4. Reconectarea alimentării: Odată ce lamp is securely installed, restore power to the fixture from the circuit breaker or fuse box.
5. Testare: Turn on the light switch to confirm proper operation of the lamp.

Nota: Dacă se înlocuiește un l existentamp, allow the old lamp to cool completely before removal. Grasp the old lamp firmly and pull it straight out from the base to avoid bending the pins.

4. Instrucțiuni de utilizare

The SATCO S8667 lamp operates by simply applying power to the compatible fixture. Once installed, turn on the light switch to illuminate the lamp. Acest lamp is designed for use with instant-start or rapid-start electronic ballasts. Refer to your fixture's specifications for ballast type compatibility.

The SATCO S8667 is a dimmable lamp. If your fixture and ballast are compatible with dimming functionality, the lamp's brightness can be adjusted using a suitable dimmer switch. Ensure the dimmer is specifically rated for fluorescent lamps to prevent damage or improper operation.

5. Întreținere

curatenie:

To maintain optimal light output, periodically clean the lamp surface. Ensure the power is off and the lamp is cool before cleaning. Use a soft, dry, lint-free cloth to gently wipe the lamp. Do not use liquid cleaners, abrasive materials, or harsh chemicals, as these can damage the lampsuprafața sau componentele interne ale acestuia.

Lamp Înlocuire:

The average rated life of the SATCO S8667 lamp este de 20,000 de ore. Când lamp reaches the end of its operational life or fails, replace it by following the installation steps outlined in Section 3. Always ensure the power is disconnected before replacing the lamp.

Eliminare: Acest lamp contains a small amount of mercury. Dispose of the lamp according to local, state, and federal regulations. Many communities have recycling programs specifically for fluorescent lamps to ensure environmentally responsible disposal.

6. Depanare

• Lamp Does Not Light:
  • Check if the power supply to the fixture is on at the switch and circuit breaker.
  • Asigurați-vă că lamp is correctly and securely seated in the fixture's base.
  • Verify that the fixture's ballast is functioning correctly and is compatible with a 40W CFL.
  • Înlocuiți lamp with a known working one to rule out a defective lamp.
• Lamp Pâlpâiri:
  • Asigurați-vă că lamp is fully inserted into the base.
  • Check for loose wiring in the fixture.
  • The ballast may be failing or incompatible with the lamp.
  • If using a dimmer, ensure it is rated for fluorescent lamps and is functioning correctly.
• Flux luminos redus:
  • Curățați lamp surface as described in the Maintenance section.
  • Lamp may be nearing the end of its operational life.
• Lamp Buzzes:
  • A persistent buzzing sound often indicates an issue with the ballast. Consult a qualified electrician for inspection and replacement if necessary.

7. Specificații

8. Garanție și asistență

For specific warranty information and technical support regarding your SATCO S8667 lamp, please contact Satco customer service directly or visit their official website. Se recomandă păstrarea bonului fiscal ca dovadă a achiziției pentru orice reclamații în garanție.

Producător: SATCO Lighting

Website: www.satco.com