1. Produs terminatview
The Eiko 635B is a high-quality 12-volt, 35-watt incandescent light bulb designed for various applications requiring reliable illumination. Featuring a SC Bayonet European (BA20s) base and an SB-35 bulb type, this bulb provides a warm 2700 Kelvin light, ideal for creating a comfortable ambiance. Its robust construction ensures consistent performance and a long service life.
This image displays the Eiko 635B incandescent light bulb, featuring its clear glass envelope and the BA20s bayonet base. The bulb is designed for 12-volt systems and has a power rating of 35 watts.
2. Informații de siguranță
Please read and understand all safety instructions before installing or operating the Eiko 635B bulb. Failure to do so may result in electric shock, fire, or personal injury.
- Oprire: Always ensure the power supply to the fixture is turned off at the circuit breaker or fuse box before installing, removing, or cleaning the bulb.
- Răcire: Allow the bulb to cool completely before handling. Incandescent bulbs can become very hot during operation and cause burns.
- Corect Voltage: Use only with 12-volt power sources. Using incorrect voltage can damage the bulb and the fixture, and pose a fire hazard.
- Baza corectă: Ensure the fixture has a compatible SC Bayonet European (BA20s) base. Do not force the bulb into an incompatible socket.
- Manipulați cu grijă: Avoid touching the glass envelope of the bulb with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves.
- Eliminare: Aruncați becurile uzate sau sparte conform reglementărilor locale.
3. Configurare (Instalare)
Follow these steps to safely install your Eiko 635B incandescent bulb:
- Verificare oprire: Confirm that the power to the light fixture is completely disconnected.
- Inspectați dispozitivul de fixare: Ensure the light fixture is clean, dry, and compatible with a BA20s base and 12-volt, 35-watt bulbs.
- Unpack Bulb: Carefully remove the new Eiko 635B bulb from its packaging.
- Inserați becul: Align the pins on the bulb's BA20s base with the slots in the fixture's socket. Gently push the bulb into the socket and twist clockwise until it locks securely into place. Do not overtighten.
- Restabiliți puterea: După ce becul este instalat în siguranță, restabiliți alimentarea cu energie a corpului de iluminat la întrerupătorul sau la cutia de siguranțe.
- Test: Porniți întrerupătorul pentru a confirma că becul funcționează corect.
4. Instrucțiuni de utilizare
The Eiko 635B incandescent bulb operates simply by applying 12 volts of power to its base. It is designed for immediate full brightness upon activation.
- Activare: Turn on the switch connected to the light fixture to illuminate the bulb.
- Dezactivare: Turn off the switch to extinguish the bulb.
- Căldură: Be aware that incandescent bulbs generate heat during operation. Ensure adequate ventilation around the fixture.
5. Întreținere
Minimal maintenance is required for the Eiko 635B bulb. Regular cleaning and timely replacement will ensure optimal performance.
- curatenie: Before cleaning, ensure the bulb is cool and the power is off. Gently wipe the glass envelope with a soft, dry, lint-free cloth to remove dust or smudges. Do not use liquid cleaners directly on the bulb.
- Înlocuire: When the bulb reaches the end of its life, it will cease to illuminate. Follow the installation steps in Section 3 to replace it with a new Eiko 635B (or equivalent) bulb.
6. Depanare
If your Eiko 635B bulb is not functioning as expected, consider the following common issues and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Becul nu se aprinde | No power to fixture, loose connection, bulb burnt out, incorrect voltage. | Check circuit breaker/fuse. Ensure bulb is securely seated. Replace bulb if burnt out. Verify fixture provides 12V. |
| Becul pâlpâie sau este slab | Loose connection, insufficient voltage, faulty fixture wiring. | Ensure bulb is tightly screwed/locked. Check voltage supply. Consult a qualified electrician if wiring is suspected. |
| Becul se arde rapid | Peste voltage, excessive vibration, frequent on/off cycling, faulty fixture. | Verificați voltage supply is exactly 12V. Ensure bulb is not subject to excessive vibration. Reduce frequent switching if possible. Inspect fixture for issues. |
7. Specificații
| Atribut | Valoare |
|---|---|
| Marca | Eiko |
| Numărul de model | 48052 |
| Numele produsului | 635B - 12V 35W A7275 |
| Voltage | 12 volți |
| Wattage | 35 wați |
| Baza becului | SC Bayonet European (BA20s) |
| Tip bec | SB-35 |
| Temperatura de culoare | 2700 Kelvin |
| M.O.L. (Length) | 2.60 in. / 66.0 mm. |
| Greutatea articolului | 0.01 uncii |
| UPC | 280342803426 |
8. Informații despre garanție
Eiko products are manufactured to high standards and are typically covered by a limited manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please refer to the original product packaging or the official Eiko website pentru informații detaliate despre garanție.
9. Asistență pentru clienți
For technical assistance, product inquiries, or warranty claims, please contact Eiko customer support through their official website or the contact information provided on your product packaging. When contacting support, please have your product model number (48052) and any relevant purchase information ready.
Eiko Official Website: www.eiko.com (Vă rugăm să rețineți: Acesta este un substituent) URL. Refer to actual product documentation for the correct website.)
