Hansgrohe Croma 160 Overhead Shower Instruction Manual

1. Introducere

This manual provides essential information for the installation, operation, and maintenance of your Hansgrohe Croma 160 Overhead Shower. Please read these instructions carefully before installation and retain them for future reference. This product is designed to deliver a wide shower rain experience with its 160 mm diameter shower head and features a QuickClean system for easy maintenance.

2. Informații de siguranță

• Installation should be performed by qualified personnel in accordance with local plumbing and building codes.
• Asigurați-vă că toate conductele de alimentare cu apă sunt închise înainte de a începe instalarea.
• Protejați produsul de îngheț.
• Avoid using abrasive cleaners or scouring pads on the chrome finish, as this may cause damage.
• Check for leaks after installation and before final use.

3. Conținutul pachetului

The Hansgrohe Croma 160 Overhead Shower package includes:

• Hansgrohe Croma 160 Overhead Shower Head (Model 27450000) with swivel joint.

Nota: A suitable shower arm (e.g., Hansgrohe product code 27412000) is required for installation and must be ordered separately.

4. Configurare și instalare

The Hansgrohe Croma 160 Overhead Shower is designed for ceiling-mounted installation. Professional installation is recommended to ensure proper function and compliance with plumbing standards.

1. Preparare: Ensure the water supply is turned off. Prepare the ceiling connection point for the shower arm.
2. Install Shower Arm: Securely install the separate shower arm (not included) into the ceiling water outlet according to its specific instructions. Ensure all connections are watertight.
3. Atașați capul de duș: Screw the Hansgrohe Croma 160 Overhead Shower Head onto the shower arm. The shower head features a G 1/2 connection. Hand-tighten first, then use an appropriate wrench to secure, being careful not to overtighten and damage the finish.
4. Adjust Swivel Joint: The integrated swivel joint allows for adjustment of the shower head angle. Adjust to your preferred position.
5. Verificarea scurgerilor: Slowly turn on the main water supply and check all connections for leaks. If leaks are detected, turn off the water and re-tighten connections as necessary.

Figura 1: Hansgrohe Croma 160 Overhead Shower Head. This image shows the polished chrome finish and the arrangement of the spray nozzles on the circular shower plate.

Figura 2: Technical drawing illustrating the dimensions of the Hansgrohe Croma 160 Overhead Shower. Key dimensions include a 160mm diameter, a total height of 62mm from the connection point to the bottom of the shower head, and a G 1/2 connection thread.

5. Instrucțiuni de utilizare

The Hansgrohe Croma 160 Overhead Shower is designed for simple operation, delivering a consistent and wide shower rain spray pattern.

• Debitul de apă: The shower head provides a flow rate of approximately 20.5 liters per minute at 3 bar pressure. An EcoSmart version (product code 28450000) is also available with a reduced flow rate of 9 liters per minute at 3 bar.
• Tip de pulverizare: The shower head offers a single, wide shower rain spray type, optimized for full body coverage.
• Ajustarea unghiului: Utilize the integrated swivel joint to adjust the angle of the shower head to your preference.

6. Întreținere

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Hansgrohe Croma 160 Overhead Shower.

• Curățarea suprafeței: Clean the chrome surface with a soft cloth and a mild, non-abrasive cleaning agent. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots. Do not use cleaners containing hydrochloric acid, formic acid, chlorine bleach, or acetic acid, as these can damage the finish.
• QuickClean System: The shower head is equipped with Hansgrohe's QuickClean system. To remove limescale deposits from the silicone nozzles, simply rub them with your finger. This should be done regularly to maintain optimal spray performance.
• Întreținerea filtrului: Periodically check the filter screen (if present in your shower arm connection) for debris and clean as necessary to maintain water flow.

7. Depanare

If you encounter issues with your Hansgrohe Croma 160 Overhead Shower, refer to the following common problems and solutions:

• Debit scăzut de apă:
  • Verificați dacă robinetul principal de alimentare cu apă este complet deschis.
  • Inspect the shower head nozzles for limescale buildup and use the QuickClean feature to remove it.
  • Check the filter screen in the shower arm connection for debris and clean if necessary.
  • Ensure adequate water pressure from your household supply.
• Conexiuni cu scurgeri:
  • Opriți alimentarea cu apă.
  • Carefully tighten the connection between the shower head and the shower arm. Do not overtighten.
  • Check if the rubber washer (gasket) is properly seated and not damaged. Replace if necessary.
• Model neuniform de pulverizare:
  • This is typically caused by limescale buildup in the nozzles. Use the QuickClean feature to clear the nozzles.

If problems persist after attempting these solutions, contact a qualified plumber or Hansgrohe customer support.

8. Specificații

9. Garanție și asistență

Produsele Hansgrohe sunt fabricate conform standardelor de înaltă calitate și beneficiază de o garanție a producătorului. Pentru detalii specifice despre garanție, vă rugăm să consultați cardul de garanție inclus împreună cu produsul sau să vizitați site-ul oficial Hansgrohe. website-ul.

Pentru asistență tehnică, piese de schimb sau asistență suplimentară, vă rugăm să contactați serviciul clienți Hansgrohe. Informațiile de contact pot fi găsite de obicei pe site-ul Hansgrohe. website-ul sau în ambalajul produsului.

You can visit the official Hansgrohe store for more information: Magazinul Hansgrohe