Kwikset 81247 Deadbolt Screw Pack Instruction Manual

Introducere

This manual provides instructions for the Kwikset 81247 Deadbolt Screw Pack. This pack contains replacement screws designed for specific Kwikset deadbolt models, ensuring proper installation and functionality. It is intended to assist with the correct identification and application of the included hardware.

Conținutul pachetului

Verificați dacă toate componentele sunt prezente în pachet:

• Assorted screws for Kwikset 780, 970, 980, and 980S deadbolts.

Descrierea imaginii: This diagram illustrates the various types of screws included in the Kwikset 81247 Deadbolt Screw Pack. It shows different lengths and head types, including long and short screws, some with full threading and others with pointed tips, all designed for secure deadbolt assembly.

Compatibilitate

This screw pack is specifically designed for use with the following Kwikset deadbolt models:

• Kwikset 780 Deadbolt
• Kwikset 970 Deadbolt
• Kwikset 980 Deadbolt
• Kwikset 980S Deadbolt

Instrucțiuni de instalare

Setup and Screw Replacement

These instructions cover the general process for replacing or installing screws in compatible Kwikset deadbolts. Always refer to your specific deadbolt's primary installation manual for detailed steps.

1. Preparare: Ensure the deadbolt is disassembled or partially disassembled as required for screw access.
2. Identify Screws: Match the screws from this pack to the corresponding screw holes in your deadbolt assembly. Pay attention to length, thread type, and head style.
3. Introduceți șuruburile: Carefully insert the correct screws into their designated positions.
4. Strânge: Using an appropriate screwdriver (typically Phillips head), tighten the screws until snug. Nu strângeți prea mult, as this can strip the threads or damage the deadbolt components.
5. Funcționalitate de testare: After all screws are in place and tightened, reassemble the deadbolt (if necessary) and test its operation to ensure smooth locking and unlocking.

Întreţinere

The screws in this pack are designed for durability. Regular maintenance is generally not required for the screws themselves.

• Periodically check that all deadbolt screws remain securely tightened.
• If a screw becomes loose, gently tighten it. Avoid overtightening.
• Do not apply lubricants directly to the screw threads unless specified by the deadbolt's primary manual.

Depanare

Probleme comune

• Screw Does Not Fit:

  Ensure you are using the correct screw from the pack for your specific deadbolt model and location. Refer to your deadbolt's original manual for screw identification.

• Screw Strips:

  This usually occurs from overtightening. If a screw head strips, it may need to be carefully extracted and replaced. If the receiving thread strips, professional assistance may be required.
• Deadbolt Malfunctions After Screw Replacement:

  Verify that all screws are correctly installed and tightened. Incorrect screw placement or overtightening can impede the deadbolt's internal mechanisms. Re-check the deadbolt's primary installation instructions.

Specificații

• Număr de model: 81247-006 (Compatible with 81247-515 screw pack designation)
• Material: Metal
• Termina: Antique Nickel (for compatible deadbolts)
• Compatibilitate: Kwikset Deadbolt Models 780, 970, 980, 980S
• Greutatea articolului: Approximately 1 Pound (for the pack)
• Dimensiuni produs: 1 x 1 x 1 inci (dimensiuni ambalaj)

Garanție și suport

For specific warranty information regarding your Kwikset deadbolt and its components, please refer to the documentation provided with your original deadbolt purchase or visit the official Kwikset website-ul.

For further assistance or technical support, contact Kwikset customer service through their official channels.