Altronix R2416300UL

Manual de utilizare al sursei de alimentare pentru montare în rack Altronix R2416300UL

Model: R2416300UL

1. Introducere

The Altronix R2416300UL is a rack mount power supply designed to provide 24VAC or 28VAC power for various applications, particularly commercial CCTV equipment. This unit features 16 individually fused outputs, ensuring reliable power distribution and protection. It is housed in a durable steel enclosure and includes a line cord, spare fuse, removable terminal blocks, and mounting brackets for convenient installation.

2. Informații importante privind siguranța

Please read these safety instructions carefully before installing or operating the Altronix R2416300UL power supply. Failure to follow these instructions may result in electric shock, fire, or damage to the unit.

Altronix R2416300UL Rack Mount Power Supply Front View

Figura 1: Față view of the Altronix R2416300UL Rack Mount Power Supply. This image shows the black steel enclosure with the Altronix logo and 16 green LED indicators for each output. A caution label for electric shock is visible on the right.

3. Configurare și instalare

3.1. Despachetarea

Carefully remove the power supply from its packaging. Verify that all components are present: the R2416300UL unit, line cord, spare fuse, removable terminal blocks, and mounting brackets.

3.2. Montare

The R2416300UL is designed for rack mounting. Use the provided mounting brackets to secure the unit into a standard 19-inch equipment rack. Ensure the rack is stable and provides adequate support for the unit's weight (approximately 17.2 pounds).

3.3. Input Power Connection

  1. Ensure the power switch on the rear of the unit is in the "OFF" position.
  2. Connect the supplied line cord to the AC input receptacle on the rear of the power supply.
  3. Plug the other end of the line cord into a grounded 115VAC, 60Hz power outlet.
Altronix R2416300UL Rack Mount Power Supply Rear View

Figura 2: Spate view of the Altronix R2416300UL Rack Mount Power Supply. This image displays the power switch, AC input, and the array of 16 output terminal blocks. The product label with specifications is also visible.

3.4. Conexiuni de ieșire

The R2416300UL provides 16 individually fused 24VAC or 28VAC outputs. Each output is equipped with a removable terminal block for easy wiring.

  1. Identify the desired output terminal block (labeled 1 through 16).
  2. Connect your device's power input wires to the corresponding terminals on the removable block. Ensure correct polarity if applicable to your device.
  3. Securely insert the wired terminal block into its receptacle on the power supply.
  4. Repeat for all devices requiring power.
Altronix R2416300UL Rear Label and Terminal Blocks Close-up

Figure 3: Close-up of the rear product label and output terminal blocks. This image provides a detailed view of the product specifications, safety warnings, and the green removable terminal blocks for connecting output devices.

4. Instrucțiuni de utilizare

4.1. Pornire/Oprire

4.2. Output Indicators

The front panel of the R2416300UL features 16 green LED indicators, one for each output. A lit green LED indicates that the corresponding output is receiving power and the fuse is intact.

Altronix R2416300UL Front Panel LED Indicators Close-up

Figure 4: Close-up of the front panel showing the 16 green LED indicators. Each LED corresponds to an individual fused output, providing a visual status of power delivery.

5. Întreținere

5.1. Îngrijire generală

5.2. Înlocuirea siguranței

If an output LED is off, the corresponding fuse may be blown. To replace a fuse:

  1. Oprire: Disconnect the unit from the main power supply by unplugging the line cord.
  2. Identify Blown Fuse: Locate the fuse holder for the affected output on the rear panel.
  3. Remove Fuse: Carefully remove the blown fuse.
  4. Install New Fuse: Replace it with a new fuse of the exact same type and rating: 3.5A, 250V. Using an incorrect fuse can cause damage or fire.
  5. Restabiliți puterea: Reconnect the unit to the main power supply and turn it on. Verify the output LED illuminates.

6. Depanare

ProblemăCauza posibilaSoluţie
No power to the unit (no LEDs lit).
  • Cablul de alimentare nu este conectat.
  • Nu există curent de la priză.
  • Defecțiune internă.
  • Asigurați-vă că este conectat corect cablul de alimentare.
  • Testați priza cu un alt dispozitiv.
  • Contact Altronix technical support.
One or more output LEDs are off.
  • Blown fuse for that output.
  • Short circuit or overload on the output.
  • Replace the fuse (3.5A, 250V).
  • Check the connected device for faults or excessive current draw.
Unit powers on, but connected devices do not function.
  • Cablare incorectă.
  • Defecțiune a dispozitivului.
  • Ieșire voltage nepotrivire.
  • Verificați că toate conexiunile sunt corecte.
  • Test device with another power source if possible.
  • Confirm device requires 24VAC or 28VAC.

7. Specificații

CaracteristicăDetaliu
MarcaAltronix
Numărul de modelR2416300UL
Vol. De intraretage115VAC (Minimum 110V, Maximum 115V)
Frecvența de intrare60 Hz
Ieșire Voltage24VAC sau 28VAC
Output Current (24VAC)12.5A
Output Current (28VAC)10A
Number of Fused Outputs16
Fuse Type/Rating3.5A, 250V
Factor de formăRack Mount
Material carcasăOţel
TerminaNegru
Dimensiuni produs (L x l x H)19.13 x 8.5 x 3.27 inci
Greutatea articolului17.2 lire sterline
StandardeUL 2044 Commercial CCTV, CUL, CE
Metoda de răcireAer

8. Garanție și asistență

8.1. Informații despre garanție

Altronix products are typically backed by a limited lifetime warranty. For specific warranty terms and conditions applicable to your R2416300UL unit, please refer to the official Altronix website-ul web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției.

8.2. Suport tehnic

For technical assistance, installation questions, or troubleshooting beyond the scope of this manual, please contact Altronix technical support. You can find their contact information on the official Altronix website (www.altronix.com).

Documente conexe - R2416300UL

Preview Ghid de instalare a surselor de alimentare CCTV seria Altronix ALTV244UL
Ghid de instalare pentru sursele de alimentare CCTV din seria Altronix ALTV244UL, care detaliază modelele, specificațiile, instrucțiunile de instalare și dimensiunile carcasei. Dispune de ieșiri de 24 V CA/28 V CA cu siguranță sau protecție PTC pentru camere CCTV și accesorii video.
Preview Ghid de instalare a surselor de alimentare CCTV din seria Altronix ALTV244UL3
Ghid de instalare pentru sursele de alimentare CCTV din seria Altronix ALTV244UL3, care detaliază modelele ALTV244UL3, ALTV244ULX3, ALTV244175UL3, ALTV244ULCB3 și ALTV244175ULCB3. Include produsul de mai sus.view, specificații, instrucțiuni de instalare, identificarea terminalelor și dimensiunile carcasei.
Preview Ghid de instalare a surselor de alimentare CCTV seria Altronix ALTV1224DC
Comprehensive installation guide for Altronix ALTV1224DC Series CCTV Power Supplies. Details models, specifications, features, terminal identification, safety warnings, and enclosure dimensions for reliable CCTV power distribution.
Preview Catalogul de soluții de alimentare Altronix: UPS, PoE, protecție la supratensiune și multe altele
Explorați catalogul complet Altronix, care include o gamă largă de surse de alimentare, sisteme UPS, midspan-uri PoE, dispozitive de protecție la supratensiune, baterii și accesorii pentru CCTV, controlul accesului și infrastructură de rețea. Găsiți specificații și soluții detaliate ale produselor.
Preview Ghid de instalare al sursei de alimentare cu montare în rack Altronix R1224DC16CBV
Ghid de instalare pentru sursa de alimentare Altronix R1224DC16CBV pentru montare în rack, care detaliază specificațiile, caracteristicile și procedurile de instalare pas cu pas pentru montarea în rack sau raft. Oferă ieșire de 12 V CC sau 24 V CC cu 16 ieșiri protejate PTC.
Preview Altronix DPS5: Versatile 6/12/24VDC Power Supply & Charger Installation Guide
This guide provides installation instructions and specifications for the Altronix DPS5, a versatile power supply and charger offering selectable 6VDC, 12VDC, or 24VDC output at 4A. Ideal for access control, security, and CCTV systems.