1. Produs terminatview
This adjustable tilt wall mount bracket is designed to securely hold flat panel LCD/plasma televisions and monitors ranging from 36 to 63 inches. Constructed from toughened steel, it supports a maximum weight capacity of 165 lbs. The mount features a variable downward tilt from 0° to -15°, allowing for optimal viewing angles. It is compatible with TVs where mounting holes are 28 inches or less horizontally and 18.5 inches or less vertically. The design includes simple-to-align brackets and a wall plate suitable for mounting to two studs or concrete surfaces, ensuring a straightforward installation process.
Caracteristicile cheie includ:
- Culoare: Black scratch-resistant finish.
- Compatibilitate: Fits most 36" to 63" LCD and Plasma TVs, supporting VESA standards up to 750 x 450.
- Tilt Feature: Adjustable from 0° to -15° downward tilt.
- Capacitate de greutate: Maximum 165 lbs.
- Instalare: Quick and easy installation with included mounting hardware.
Imaginea 1.1: Față view of the adjustable tilt wall mount bracket, showing the main wall plate and the two vertical TV brackets attached, ready for installation.
2. Informații de siguranță
Please read all instructions carefully before installation. If you have any doubts about the installation process, consult a qualified professional. Incorrect installation can lead to serious injury or damage to equipment.
- Limită de greutate: Nu depășiți capacitatea maximă de greutate de 75 kg.
- Dimensiunea ecranului: Asigurați-vă că dimensiunea ecranului televizorului se încadrează în intervalul recomandat de 36" până la 63".
- Suprafata de montare: The wall mount must be securely fastened to a structural support (e.g., wood studs, concrete wall). Do not install on drywall alone.
- Instrumente: Use appropriate tools for installation. Wear safety glasses.
- Copii: Țineți copiii departe de zona de instalare.
- Hardware: Use only the provided mounting hardware. If your TV requires different screws, consult your TV's manual.
- Nivelare: Ensure the mount is level before attaching the TV to prevent uneven weight distribution.
3. Conținutul pachetului
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact your retailer for assistance.
- Ansamblu placă de perete
- TV Brackets (2 units)
- Kit de montare (diverse șuruburi, șaibe, distanțiere, ancore)
- Instrucțiuni de instalare (acest manual)
Imaginea 3.1: Spate view of the wall mount bracket, showing the flat wall plate with multiple mounting holes and the attached TV brackets.
4. Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Numărul de model | AM11-B-4352 |
| Dimensiunile produsului | 32 x 4 x 8.9 inci |
| Greutatea articolului | 15 lire sterline |
| Material | Oțel aliat |
| Culoare | Negru |
| Dispozitive compatibile | Television (36" to 63" flat panel LCD/Plasma) |
| Tip de montare | Montare pe perete |
| Tipul de mișcare | Înclinare |
| Unghi maxim de înclinare | 15 Degrees (downward) |
| Capacitate maximă de greutate | 165 lbs (75 kg) |
| Compatibilitate VESA | Up to 750 x 450 (Mounting holes on TV: 28" or less horizontally, 18.5" or less vertically) |
5. Configurare și instalare
This section outlines the steps for safely installing your wall mount. It is recommended that two people perform the installation.
5.1 Unelte necesare (nu sunt incluse)
- Stud finder (for wood stud installation)
- Găuriți cu burghie adecvate
- Nivel
- Creion
- Bandă de măsurare
- Cheie tubulară sau cheie reglabilă
- Șurubelniță cu cap Phillips
5.2 Atașarea suporturilor TV la televizor
- Așezați cu grijă televizorul cu fața în jos pe o suprafață moale și curată pentru a preveni deteriorarea ecranului.
- Identificați găurile de montare VESA de pe spatele televizorului.
- Select the correct screws, washers, and spacers from the hardware kit that fit your TV's mounting holes. Refer to your TV's manual for recommended screw sizes.
- Attach the two vertical TV brackets to the back of your TV using the selected hardware. Ensure the brackets are oriented correctly (hooks facing downwards) and are securely tightened. Do not overtighten.
Imaginea 5.2: Laterală view of the wall mount bracket, highlighting the tilt adjustment mechanism and the robust construction.
5.3 Montarea plăcii de perete pe perete
- Determinați locația de montare: Choose a location on the wall where you want to mount your TV. Consider viewing height and proximity to power outlets.
- Locate Studs (for wood stud installation): Use a stud finder to locate the centers of two adjacent wood studs. Mark these locations with a pencil. The wall plate is designed to span two studs.
- Poziționare placă de perete: Hold the wall plate against the wall at the desired height. Use a level to ensure it is perfectly horizontal. Mark the drill holes through the wall plate onto the wall.
- Găuriți găuri pilot:
- Pentru grinzi de lemn: Drill pilot holes into the center of the marked studs using a drill bit slightly smaller than the lag bolts.
- Pentru pereți din beton/cărămidă: Drill pilot holes using a masonry drill bit. Insert wall anchors into the drilled holes until flush with the wall surface.
- Placă de perete fixă: Align the wall plate with the drilled holes. Insert the lag bolts (for wood studs) or concrete anchors and screws (for concrete/brick) through the wall plate and into the pilot holes. Tighten all bolts securely with a socket wrench. Do not overtighten to avoid stripping.
Imaginea 5.3: Înclinată view of the wall mount bracket, illustrating the range of tilt possible and the locking mechanism.
5.4 Hanging the TV on the Wall Plate
- With assistance, carefully lift the TV (with attached brackets) and hook the TV brackets onto the top edge of the wall plate.
- Coborâți ușor televizorul până când suporturile sunt complet așezate pe placa de perete.
- Locate the safety screws or locking mechanisms at the bottom of the TV brackets. Secure these to prevent the TV from accidentally lifting off the wall plate.
- Perform a gentle pull test to ensure the TV is securely mounted.
Imaginea 5.4: Prim-plan lateral view of the wall mount bracket, detailing the robust construction and the secure attachment points for the TV brackets.
6. Operating Instructions: Tilt Adjustment
This wall mount allows for a downward tilt adjustment from 0° to -15° to optimize your viewîmbunătățirea experienței vizuale și reducerea strălucirii.
- To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of the TV brackets.
- Loosen these knobs/bolts slightly.
- Carefully tilt the TV to the desired downward angle.
- Once the desired angle is achieved, securely tighten the tilt adjustment knobs/bolts to lock the TV in place. Ensure both sides are tightened evenly.
Image 6.1: Two views of the wall mount bracket, demonstrating its design from slightly different angles, emphasizing its adjustability.
7. Întreținere
Întreținerea regulată asigură longevitatea și funcționarea în siguranță a suportului de perete.
- curatenie: Ștergeți suportul cu o cârpă moale și uscată. Evitați utilizarea de produse de curățare abrazive sau solvenți.
- Inspectie periodica: Verificați periodic toate șuruburile și bolțurile pentru a vă asigura că rămân strânse. În timp, vibrațiile sau mișcarea pot cauza slăbirea elementelor de fixare.
- Verificarea daunelor: Inspect the mount for any signs of damage, corrosion, or wear. If any damage is observed, do not use the mount and contact your retailer for advice.
8. Depanare
If you encounter issues during or after installation, refer to the following common problems and solutions.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Televizorul nu este la nivel | Wall plate was not installed level. | Remove TV, loosen wall plate bolts, adjust with a level, and re-tighten. Re-hang TV. |
| TV does not fit the mount | Incorrect VESA pattern or TV size. | Verify your TV's VESA pattern and weight against the mount's specifications (max 750x450 VESA, 165 lbs). |
| Tilt adjustment is loose or stiff | Adjustment knobs/bolts are not properly tightened or lubricated. | Ensure adjustment knobs/bolts are tightened after setting the desired tilt. If stiff, a small amount of silicone lubricant may be applied to moving parts (avoiding contact with TV). |
| Missing hardware | Package contents incomplete. | Contact your retailer for replacement parts. |
9. Garanție și asistență
For specific warranty information regarding this product, please refer to the documentation provided at the time of purchase or contact the retailer directly. Warranty terms and conditions may vary.
For technical support or inquiries, please contact the customer service department of the retailer or manufacturer. Keep your purchase receipt as proof of purchase.
