Introducere
Thank you for choosing the Furman RS-1 Remote System Control. This keyswitch panel is designed to provide convenient and secure remote on/off sequencing control for compatible Furman power sequencers and other power management devices. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the performance and longevity of your unit.
Informații importante privind siguranța
Always observe the following safety precautions to prevent injury and damage to the unit or connected equipment:
- Nu expuneți unitatea la ploaie sau umezeală.
- Nu deschideți c.asing. În interior nu există piese care să poată fi reparate de utilizator. Apelați la personal de service calificat pentru orice operațiune de service.
- Ensure proper grounding for all connected equipment.
- Use only with compatible Furman power sequencers as specified in this manual.
- Install in a location free from excessive heat, dust, and vibration.
- Acest produs conține substanțe chimice cunoscute de statul California pentru a provoca cancer și malformații congenitale sau alte vătămări ale reproducerii. Spălați-vă mâinile după manipulare.
Conținutul pachetului
Verificați dacă toate articolele sunt prezente în colet:
- Furman RS-1 Remote System Control Panel
- Chei (2)
- Mounting Screws (if applicable, typically included for wall plate installation)
- Acest manual de utilizare
Configurare și instalare
The Furman RS-1 is designed for remote control of compatible Furman power sequencers. Installation typically involves mounting the panel and connecting it to the sequencer via low-voltagCablarea.
Montarea panoului
The RS-1 is designed to fit into a standard single-gang electrical box or can be surface mounted. Ensure the mounting location is easily accessible and provides a clear path for wiring to the main power sequencer.
- Alegeți o locație de montare potrivită.
- Secure the RS-1 panel using appropriate screws (not always included, may require standard electrical box screws).
Conexiuni de cablare
Connect the RS-1 to your Furman power sequencer according to the sequencer's specific wiring diagram. The RS-1 typically uses low-voltage control wiring. Refer to your sequencer's manual for detailed connection instructions.
Dispozitive compatibile:
- Furman ASD-120 Sequenced Power Distributor
- Power Link
- Port de alimentare
- Remote AC Controller
- MiniPort Power Relay series
- PS-8R
- PS-8R II
- PS-PRO II Power Sequencers
Figura 1: Față view of the Furman RS-1 Remote System Control Panel. It features a "SYSTEM ON" indicator light, an "ON" button, an "OFF" button, and a keyswitch for security.
Instrucțiuni de operare
The Furman RS-1 provides a simple and secure method for controlling your power sequencer.
Pornirea sistemului
- Insert the key into the keyswitch on the RS-1 panel.
- Turn the key to the "ON" position. This enables the control functions of the panel.
- Apăsați tasta ON button. The connected Furman power sequencer will begin its power-up sequence.
- Observe the "SYSTEM ON" indicator light. It should illuminate (typically green) to confirm that the system is powered on and sequencing is active.
Oprirea sistemului
- Apăsați tasta OFF button. The connected Furman power sequencer will begin its power-down sequence.
- The "SYSTEM ON" indicator light should extinguish once the system is fully powered off.
- Turn the key to the "OFF" position and remove it for security, if desired.
Note: The keyswitch provides a security lockout. The ON and OFF buttons will not function unless the key is inserted and turned to the "ON" position.
Întreţinere
The Furman RS-1 requires minimal maintenance. Keep the panel clean and free of dust.
- Ștergeți suprafața cu o cârpă moale și uscată.
- Do not use liquid cleaners or abrasive chemicals.
- Ensure the keyswitch mechanism remains free of debris.
No user-serviceable parts are inside. Do not attempt to open or repair the unit yourself.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| System does not power on/off when buttons are pressed. |
|
|
| "SYSTEM ON" indicator light does not illuminate. |
|
|
If you continue to experience issues, please contact Furman customer support.
Specificații
| Caracteristică | Detaliu |
|---|---|
| Model | RS-1 |
| Dimensiunile produsului | 4.75 x 3.5 x 2 inci |
| Greutatea articolului | 0.635 uncii |
| Culoare | Negru |
| Țara de origine | China |
| Dispozitive compatibile | Furman ASD-120 Sequenced Power Distributor, Power Link, Power Port, Remote AC Controller, MiniPort Power Relay series, PS-8R, PS-8R II, PS-PRO II Power Sequencers |
| Caracteristica specială | Ergonomic |
Garanție și suport
For warranty information and technical support, please visit the official Furman website-ul lor web sau contactați departamentul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției pentru reclamațiile în garanție.
Furman Customer Support:
- Website: www.furmanpower.com
- Refer to the product page on Amazon for additional support links: Pagina de produs Amazon
