1. Introducere
This manual provides essential information for the proper use and installation of the Futaba FSH69 Mounting Pads. These pads are specifically designed for use with the Futaba GY520 Gyro (FUTM0810) to ensure secure and vibration-dampened mounting.
2. Produs terminatview și Caracteristici
The Futaba FSH69 Mounting Pads are crucial components for hobbyists and professionals working with remote-controlled vehicles. They provide a stable and cushioned base for sensitive electronic components like gyros.
Caracteristici cheie:
- Foam Construction: Made from durable foam material designed to absorb vibrations.
- Autoadeziv: Features a self-adhesive backing for easy and secure attachment.
- Culoarea gri: Discreet grey color to blend with various setups.
3. Conținutul pachetului
La deschiderea pachetului, ar trebui să găsiți următoarele articole:
- Ten (10) Futaba FSH69 Mounting Pads
4. Specificații
| Atribut | Valoare |
|---|---|
| Lungime | 22 mm (0.87") |
| Lăţime | 22 mm (0.87") |
| Înălţime | 2 mm (0.08") |
| Greutatea articolului | 1.12 uncii |
| Dimensiunile produsului (ambalaj) | 0.13 x 3.63 x 6.25 inci |
| Numărul de model | FUTM4669 |
| Vârsta recomandată de producător | 14 ani în sus |
5. Configurare și instalare
The Futaba FSH69 Mounting Pads are designed for straightforward installation. They are primarily intended for use with the Futaba GY520 Gyro (FUTM0810).
Pașii de instalare:
- Pregătiți suprafața: Ensure the surface where the gyro will be mounted is clean, dry, and free of dust, grease, or any debris. A clean surface ensures optimal adhesion.
- Peel the Backing: Carefully peel off the protective backing from one side of the mounting pad to expose the adhesive.
- Apply to Gyro: Align the adhesive side of the pad with the bottom surface of your Futaba GY520 Gyro or other compatible component. Press firmly to ensure good contact.
- Peel Second Backing: Once the pad is securely attached to the gyro, peel off the remaining protective backing from the other side of the pad.
- Mount the Gyro: Carefully position the gyro with the attached mounting pad onto the desired mounting location on your model. Press down firmly and evenly for several seconds to ensure a strong bond.
Nota: For best results, allow the adhesive to cure for a short period (e.g., 15-30 minutes) before subjecting the component to vibrations or movement.
6. Operare
These mounting pads are passive components and do not require any operational procedures. Their function is to provide vibration dampening and secure attachment for other electronic components.
7. Întreținere
The Futaba FSH69 Mounting Pads require no specific maintenance. If a pad loses its adhesive properties or becomes damaged, it should be replaced with a new one to ensure optimal performance of the mounted component.
8. Depanare
As passive components, these mounting pads typically do not require troubleshooting. If a component mounted with these pads experiences excessive vibration or detachment, consider the following:
- Aderență slabă: Ensure the mounting surface was clean and dry during installation. Re-clean the surface and use a new pad if necessary.
- Damaged Pad: Inspect the pad for tears, compression, or degradation. Replace if damaged.
- Aplicare incorectă: Verify that the pad is correctly sized and positioned for the component being mounted.
9. Garanție și asistență
Specific warranty information for the Futaba FSH69 Mounting Pads is not provided in the available product data. For warranty claims or technical support, please contact Futaba customer service or the retailer from whom the product was purchased. Keep your proof of purchase for any warranty inquiries.
You may find additional support resources on the official Futaba website: www.futabarc.com
