Manual de instrucțiuni pentru baza de duș din fontă KOHLER Salient 9053-0, 60" x 30"

Introducere

The KOHLER Salient 9053-0 60" x 30" Alcove Cast Iron Shower Base is designed for custom-tiled shower environments, offering durability and a spacious showering area. Its versatile design complements various bathroom decors.

Caracteristici cheie:

• Spacious shower base for ample showering room.
• Safeguard slip-resistant finish for enhanced safety.
• Single threshold for alcove installation with three tile-in flanges.
• Equipped with a left drain.
• Constructed from durable KOHLER Cast Iron.

Configurare și instalare

This section provides general guidelines for installing your KOHLER Salient shower base. Always refer to the detailed installation instructions included with your product for complete safety information, required tools, and specific steps.

Verificări înainte de instalare:

• Ensure the subfloor is level and capable of fully supporting the shower base.
• Remove any packaging materials and inspect the shower base for damage.

Pașii de instalare s-au terminatview:

1. Remove the cardboard installation block from the shower base and split it into two pieces.
2. Install the drain assembly to the shower base according to the drain manufacturer's instructions.
3. With assistance, carefully move the shower base into position within the shower area. Avoid dropping the base to prevent damage or injury.
4. Press one cardboard installation block onto each side of the front apron, to the inside of the front feet.
5. Carefully lower the shower base to the floor, ensuring it fits properly in the stud pocket.
6. Stand on the shower base to press through the installation blocks, ensuring a secure fit.
7. Remove and discard the exposed portions of the cardboard blocks.
8. Confirm the shower base is level. If necessary, use metal shims to ensure the base sits level.
9. Complete the installation by connecting the drain pipe, installing the finished wall, and installing the bathroom floor.
10. Record the information on the enamel label for future reference.

Instrucțiuni de operare

Once installed, the KOHLER Salient shower base is ready for use. Ensure the drain is clear of debris before and after each use to maintain proper water flow.

• The Safeguard slip-resistant finish provides enhanced traction for safety during showering.
• Avoid using abrasive materials or harsh chemicals that could damage the enamel surface.

Îngrijire și întreținere

Proper care will help maintain the beauty and longevity of your KOHLER cast iron shower base.

Curatenie generala:

• Clean the surface regularly with a soft sponge or cloth and a mild, non-abrasive cleaner.
• Rinse thoroughly with warm water after cleaning to remove all cleaner residue.
• Avoid using steel wool, wire brushes, or abrasive scouring pads, as these can scratch the enamel finish.
• Do not use harsh chemical cleaners, such as those containing ammonia, bleach, or strong acids, as they can damage the cast iron enamel.

Prevenirea daunelor:

• Avoid dropping heavy or sharp objects onto the shower base, which could chip or crack the enamel.
• Do not use the shower base as a cutting surface.
• For stubborn stains, consult KOHLER's official cleaning recommendations or contact customer support.

Depanare

If you encounter any issues with your shower base, refer to the following common solutions:

• Drenaj lent: Check the drain for hair or soap buildup. Clear any obstructions. Ensure the drain pipe is correctly installed and free of blockages.
• Pete de suprafață: For most stains, use a mild, non-abrasive cleaner. Avoid abrasive tools or harsh chemicals.
• Îmbunătățirea apei: Verify that the shower base was installed level. If not, shimming may be required (consult a professional if necessary).
• Chips or Cracks: Cast iron is highly durable, but extreme impact can cause damage. For significant damage, professional repair or replacement may be necessary. Contact KOHLER customer support for guidance.

Specificații

Garanție și suport

Informații despre garanție:

This KOHLER Salient Cast Iron Shower Base is covered by the Garanție limitată pe viață pentru fontă KOHLERVă rugăm să consultați documentația de garanție inclusă împreună cu produsul pentru termenii și condițiile complete.

Asistență clienți:

For technical assistance, parts, or warranty claims, please contact KOHLER Customer Support. Refer to the contact information provided in your product packaging or visit the official KOHLER website-ul.

Product Visuals and Information

Imagine: De sus în jos view of the KOHLER Salient 60" x 30" white cast iron shower base, featuring the left-side drain and textured slip-resistant floor pattern.

Image: A diagram illustrating the superior qualities of KOHLER Enameled Cast Iron, emphasizing its ultra-thick enamel, strength, and durability compared to other enameled steel products.

Image: Technical drawing providing key dimensions of the KOHLER Salient 60" x 30" shower base, including length, width, and height.