Progress Lighting P7206-30EB Fluorescent Light Fixture User Manual

Produs terminatview

The Progress Lighting P7206-30EB is a contemporary flush mount fluorescent light fixture designed for various indoor applications such as kitchens or workshops. It features contoured white acrylic domes and curved trim, providing a pleasing halo effect. This fixture operates on a standard 120-volt HPF electric ballast and is designed for ceiling mount installation.

Figura 1: Față view of the Progress Lighting P7206-30EB fluorescent light fixture, showcasing its contoured white acrylic domes and textured white molding.

Informații de siguranță

AVERTIZARE: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or bulb replacement. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unsure about proper installation.

• Nu instalați acest dispozitiv de iluminat în locuri umede sau uscate.amp locații.
• Asigurați-vă că corpul de iluminat este montat în siguranță pe un element structural al tavanului.
• Utilizați numai tipul de bec și wat specificatetage pentru a preveni supraîncălzirea și deteriorarea.
• Țineți materialele inflamabile departe de corpul de iluminat.

Conținutul pachetului

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact Progress Lighting customer service for assistance.

• (1) P7206-30EB Fluorescent Light Fixture
• (1) Mounting Hardware Kit (screws, wire nuts, etc.)
• Bulbs (4x 32W F32T8) are NOT included and must be purchased separately.

Specificații

Configurare și instalare

Important: Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Ensure power is disconnected at the main circuit breaker before proceeding.

1. Pregătiți zona de instalare:
   • Turn off power at the main circuit breaker or fuse box to the outlet box where the fixture will be installed.
   • Asigurați-vă că suprafața de montare este curată, uscată și solidă din punct de vedere structural.
2. Montați dispozitivul:
   • Carefully remove the fixture from its packaging.
   • Align the fixture's mounting holes with the outlet box or pre-drilled holes in the ceiling. This fixture is designed to cover a standard outlet box.
   • Secure the fixture to the ceiling using the provided mounting screws. Ensure it is firmly attached and does not wobble.
3. Conexiuni electrice:
   • Conectați firul alb al corpului de iluminat la firul alb (neutru) din cutia de priză folosind o piuliță.
   • Conectați firul negru al corpului de iluminat la firul negru (activ) de la cutia de priză folosind o piuliță de sârmă.
   • Connect the fixture's ground wire (usually bare copper or green) to the house ground wire (usually bare copper or green) from the outlet box. If no house ground wire is present, connect to the green grounding screw on the mounting bracket.
   • Introduceți cu grijă toate firele în cutia de priză.
4. Install Bulbs and Diffuser:
   • Insert four (4) 32-watt F32T8 fluorescent bulbs into the lamp holders. Ensure they are seated correctly.
   • Carefully place the white acrylic diffuser onto the fixture, ensuring it is securely in place.
5. Restabiliți puterea:
   • Reconectați alimentarea la întrerupătorul de circuit sau la cutia de siguranțe.
   • Testați dispozitivul de fixare pentru a vă asigura că funcționează corect.

Figure 2: The P7206-30EB fixture installed in a kitchen setting, demonstrating its flush mount appearance and illumination.

Instrucțiuni de operare

The Progress Lighting P7206-30EB fixture is designed for simple operation. Once properly installed and wired to a wall switch, it functions like any standard light fixture.

1. Pornire/Oprire:
   • Flip the wall switch connected to the fixture to the "ON" position to illuminate the bulbs.
   • Flip the wall switch to the "OFF" position to turn off the light.

Întreţinere

Regular maintenance ensures optimal performance and longevity of your light fixture.

• curatenie:
  • Before cleaning, ensure the power to the fixture is turned off at the circuit breaker.
  • Wipe the exterior of the fixture and the acrylic diffuser with a soft, damp pânză.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
  • Allow the fixture to dry completely before restoring power.
• Înlocuire bec:
  • Opriți alimentarea cu energie a corpului de iluminat la întrerupătorul de circuit.
  • Carefully remove the acrylic diffuser.
  • Allow old bulbs to cool before handling. Gently twist and remove the old F32T8 fluorescent bulbs.
  • Insert new 32-watt F32T8 fluorescent bulbs, ensuring they are properly seated in the lamp titularii.
  • Replace the acrylic diffuser.
  • Restabiliți alimentarea și testați dispozitivul.

Depanare

Dacă întâmpinați probleme cu corpul de iluminat, consultați următoarele probleme și soluții frecvente:

Dacă problema persistă după încercarea acestor soluții, contactați un electrician calificat sau serviciul de asistență clienți Progress Lighting.

Garanție și suport

Garantie: The Progress Lighting P7206-30EB fixture comes with a Garanție limitată de 1 ani from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized repairs.

Asistență clienți: For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer service. Refer to the official Progress Lighting website pentru cele mai recente informații de contact.

Vă rugăm să păstrați bonul fiscal ca dovadă a achiziției în scopul garanției.