1. Introducere
Thank you for choosing the Progress Lighting P8072-28 Recessed Trim. This incandescent open splay recessed trim features a white powdercoat finish and is designed for use with insulated ceilings. It has a 7-3/4 inch outside diameter and is intended for use with compatible Progress 6-inch recessed lighting housings (P87, P187, P83, P88, P82). Please read these instructions carefully before installation and use to ensure proper function and safety.
Figura 1.1: Față view of the P8072-28 Recessed Trim with an incandescent bulb installed.
2. Informații de siguranță
AVERTIZARE: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not install this trim with non-compatible recessed housings. Compatibility is specified for Progress 6-inch recessed housings (P87, P187, P83, P88, P82).
- Refer to the housing's specifications for maximum wattage. This trim is rated for up to 250 watts at 120 volts.
- Asigurați-vă că toate conexiunile sunt sigure și izolate corespunzător.
- Nu modificați produsul în niciun fel.
3. Lista componentelor
Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:
- P8072-28 Recessed Trim (1 unit)
- Product and Installation Sheet (this document)
Note: Recessed housing and incandescent bulb are sold separately.
4. Configurare și instalare
This trim is designed for easy installation into compatible 6-inch recessed housings. The trim mounts to the can with a 2-inch by 7-inch leaf spring mechanism, which pulls the trim tightly to the ceiling.
- Opriți alimentarea: Before starting, ensure the power to the circuit is turned off at the circuit breaker or fuse box.
- Pregătirea locuinței: Ensure the recessed housing (e.g., P87, P187) is properly installed in the ceiling according to its own instruction manual.
- Atașați priza: Lamp socket from the recessed housing attaches directly to the trim. This eliminates the need for an adjustable socket mount within the housing. Secure the socket to the designated attachment point on the trim.
- Instalați becul: Screw the appropriate incandescent bulb (up to 250W) into the socket.
- Insert Trim: Carefully push the trim assembly, with the bulb and socket attached, into the recessed housing opening. The leaf springs on the trim will compress and then expand to firmly hold the trim against the ceiling. Apply firm, even pressure until the trim is flush with the ceiling surface.
- Restabiliți puterea: Once the trim is securely in place, restore power at the circuit breaker or fuse box and test the light.
Figura 4.1: De sus în jos view of the P8072-28 Recessed Trim, illustrating the open splay design.
Figure 4.2: Dimensions of the P8072-28 Recessed Trim, showing a 7-3/4 inch outside diameter.
5. Instrucțiuni de utilizare
The P8072-28 Recessed Trim operates in conjunction with your installed recessed housing and a compatible incandescent bulb. Operation is controlled via a standard wall switch connected to the lighting circuit.
- Asigurați-vă că este corecttage bulb (up to 250W) is installed.
- Folosește întrerupătorul de perete pentru a aprinde sau a stinge corpul de iluminat.
6. Întreținere
The P8072-28 Recessed Trim requires minimal maintenance.
- curatenie: To clean the trim, ensure power is off. Wipe with a soft, dry or slightly damp Nu folosiți substanțe de curățare abrazive sau solvenți, deoarece acestea pot deteriora finisajul.
- Înlocuire bec: Turn off power at the circuit breaker. Carefully pull the trim down from the ceiling to access the bulb. Unscrew the old bulb and screw in a new one of the correct type and wattage. Reinsert the trim firmly into the housing.
7. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde. | Nicio putere la corp. Becul este slăbit sau ars. Cablare incorectă. | Verificați întrerupătorul/siguranța. Strângeți sau înlocuiți becul. Consultați un electrician calificat pentru a verifica cablajul. |
| Trim does not sit flush with ceiling. | Improper installation of leaf springs. Housing not properly installed. | Ensure leaf springs are fully engaged. Verify housing installation according to its manual. |
| Lumina pâlpâie. | Bec slăbit. Variator de intensitate luminos incompatibil. Problemă de cablare. | Strângeți becul. Ensure dimmer is compatible with incandescent lights. Consultați un electrician calificat. |
8. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | P8072-28 |
| Marca | Iluminare progres |
| Tip | Recessed Trim (Open Splay) |
| Culoare | Alb |
| Material | Aluminiu |
| Diametrul exterior | 7-3/4 inchi (19.69 cm) |
| Dimensiuni produs (L x l x H) | 7.75" x 7.75" x 4.75" (19.69 cm x 19.69 cm x 12.07 cm) |
| Greutatea articolului | 5.9 uncii (167 grame) |
| Voltage | 120 volți |
| Max Wattage | 250 wați (incandescent) |
| Sursa de alimentare | Electric cu fir |
| Utilizare în interior/exterior | De interior |
| Carcase compatibile | Progress 6-inch recessed housings (P87, P187, P83, P88, P82) |
| UPC | 785247807222 |
9. Informații despre garanție
This Progress Lighting P8072-28 Recessed Trim comes with a Garanție limitată de 1 an from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modification. For warranty claims, please retain your proof of purchase and contact Progress Lighting customer support.
10. Asistență și contact
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Progress Lighting customer support. Visit the official Progress Lighting website pentru cele mai recente informații de contact.
Progress Lighting Official Website: Vizitați magazinul Progress Lighting de pe Amazon
