Greenlee 1594

Greenlee Communications 1594 Cable Check LAN and A/V Tester

Model: 1594 | Brand: Greenlee

Introducere

The Greenlee Communications 1594 Cable Check is a versatile testing device designed for smart home installations. It efficiently tests RJ45, cable TV "F", RCA, and BNC cabling. This tool helps identify good connections, opens, shorts, and cross-connections in network and A/V cables, ensuring proper installation and functionality.

Caracteristici cheie:

  • Combination network and coax tester for comprehensive cable diagnostics.
  • Automatic scanning feature for quick and efficient cable checks.
  • Clear LED read-outs provide easy interpretation of test results.
  • Identifies data and telephone connection schemes.
  • Maps cable pin-out for precise fault location.
  • Tests continuity of cable TV cables and installed cable runs.
  • Long battery life of 15 hours for continuous use.
Greenlee Communications 1594 Cable Check LAN and A/V Tester with accessories

Figure 1: Greenlee Communications 1594 Cable Check LAN and A/V Tester with its carrying case, RJ45 patch cords, and various adapters (75ohm male terminator, CATV "F" female, CATV "F" to BNC, CATV "F" to RCA).

Conținutul pachetului

Verificați dacă toate articolele enumerate mai jos sunt incluse în pachetul dumneavoastră:

  • Greenlee Communications 1594 Cable Check Main Unit
  • Greenlee Communications 1594 Cable Check Remote Unit
  • 2 x RJ45 Patch Cords
  • 1 x 75 Ohm Male Terminator
  • 1 x CATV "F" Female Adapter
  • 2 x CATV "F" (Male) to BNC (Female) Adapters
  • 2 x CATV "F" (Male) to RCA (Female) Adapters
  • 1 x 9-Volt Battery (included)
  • 1 x Durable Nylon Carrying Case
  • Manual de instructiuni de operare

Înființat

1. Instalarea bateriei

  1. Locate the battery compartment on the back of the main tester unit.
  2. Deschideți capacul bateriei.
  3. Insert the included 9-Volt battery, ensuring correct polarity.
  4. Închideți bine capacul bateriei.

2. Connecting Cables for Testing

The tester consists of a main unit and a remote unit. For most tests, one end of the cable connects to the main unit and the other end to the remote unit. For installed cables, the remote unit can be left at the far end of the cable run.

  • RJ45 Cables: Insert one end of the RJ45 cable into the RJ45 port on the main unit and the other end into the RJ45 port on the remote unit.
  • Cabluri coaxiale: Insert one end of the coaxial cable into the F-connector port on the main unit and the other end into the F-connector port on the remote unit. Use the provided adapters for BNC or RCA connections as needed.

Instrucțiuni de operare

Operațiune generală

  1. Ensure the 9-Volt battery is installed in the main unit.
  2. Connect the cable to be tested to the appropriate ports on the main and remote units.
  3. Select the desired test mode (RJ45 or Coax) using the switch on the side of the main unit.
  4. Apăsați tasta TEST button to initiate the cable test.
  5. Observe the LED indicators on both the main and remote units to interpret the test results.

RJ45 (LAN) Cable Testing

This mode tests RJ45 patch cords and network installations for proper wiring and continuity.

  1. Connect the RJ45 cable to the main and remote units.
  2. Set the switch on the main unit to RJ45.
  3. Apăsați tasta TEST button. The LEDs on both units will sequentially light up from 1 to 8, indicating the status of each wire pair.
  4. Interpretation of LEDs:
    • All LEDs light up sequentially on both units: Indicates a correctly wired cable (Pass).
    • LEDs do not light up or skip a number: Indicates an open circuit (Open).
    • Multiple LEDs light up simultaneously or out of sequence: Indicates a short circuit, miswire, or split pair.
    • "Low Batt" LED: Indicates the 9-Volt battery needs replacement.

Coaxial (A/V) Cable Testing

This mode tests coaxial cables (F-type, BNC, RCA with adapters) for continuity and shorts.

  1. Connect the coaxial cable to the main and remote units (using adapters if necessary).
  2. Set the switch on the main unit to CONVINGE.
  3. Apăsați tasta TEST buton.
  4. Interpretation of LEDs:
    • "Pass" LED lights up: Indicates good continuity.
    • "Short" LED lights up: Indicates a short circuit in the cable.
    • No LEDs light up: Indicates an open circuit or no connection.
    • "Low Batt" LED: Indicates the 9-Volt battery needs replacement.

Întreţinere

Curatenie

Ștergeți unitatea cu o cârpă moale și uscată. Nu utilizați substanțe de curățare abrazive sau solvenți.

Înlocuirea bateriei

When the "Low Batt" LED illuminates, replace the 9-Volt battery promptly to ensure accurate readings. Refer to the "Battery Installation" section for instructions.

Depozitare

Store the Cable Check in its durable nylon carrying case in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.

Depanare

ProblemăCauza posibilaSoluţie
Testerul nu pornește.Dead or improperly installed 9-Volt battery.Check battery polarity; replace battery if necessary.
RJ45 test shows "Open" or incorrect pin-out.Faulty cable, improper crimp, or damaged connector.Inspect cable and connectors for damage. Re-crimp or replace the cable.
Coax test shows "Short".Shielding touching the center conductor, or damaged cable.Inspect connectors for stray wires. Replace or repair the cable.
Rezultate inconsistente ale testelor.Low battery or loose connections.Replace battery. Ensure all cable connections are secure.

Specificații

CaracteristicăDetaliu
Numărul de model1594
Tipuri de cablu acceptateRJ45 (LAN), Coaxial (F-type, BNC, RCA with adapters)
Sursa de alimentare1 x 9-Volt Battery
Durata de viață a baterieiAproximativ 15 de ore de utilizare continuă
Greutatea articolului8.8 uncii (aproximativ 249 grame)
Dimensiunile produsului2.54 x 5.51 x 1.61 inci (aprox. 6.45 x 14 x 4.09 cm)
MaterialPlastic
ProducătorPaladin Tools (now Greenlee)

Garanție și suport

Informații despre garanție

The Greenlee Communications 1594 Cable Check comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Asistență pentru clienți

For technical assistance, troubleshooting, or warranty service, please contact Greenlee Communications customer support. Visit the official Greenlee website pentru cele mai recente informații de contact.

Note: Product specifications and warranty terms are subject to change without prior notice.

Documente conexe - 1594

Preview Manual de instrucțiuni pentru mașina de îndoit segmente Greenlee 777
Manual de instrucțiuni pentru mașina de îndoit segmente Greenlee 777, care oferă îndrumări detaliate privind operarea în siguranță, configurarea, tehnicile de îndoire, întreținerea și identificarea pieselor pentru această unealtă de îndoire a conductelor.
Preview Manual de instrucțiuni pentru extractorul de cabluri și pachetele de tragere Greenlee Ultra Tugger 6800 și 6805A
Acest manual oferă instrucțiuni detaliate pentru operarea și întreținerea în siguranță a extractoarelor de cabluri Greenlee 6800 și 6805A Ultra Tugger. Acesta acoperă informații de siguranță, identificarea componentelor, specificații, principii de tragere a cablurilor, configurații tipice și proceduri operaționale.
Preview Manual de instrucțiuni pentru termometrul cu infraroșu Greenlee TG-1000
Manual de instrucțiuni complet pentru termometrul cu infraroșu Greenlee TG-1000. Aflați despre caracteristicile sale, funcționarea în siguranță, întreținerea și depanarea pentru măsurători precise ale temperaturii fără contact în diverse aplicații.
Preview Manual de instrucțiuni pentru termometrul cu infraroșu și contact Greenlee TG-2000
Manual de instrucțiuni pentru termometrul cu infraroșu și contact Greenlee TG-2000, care detaliază caracteristicile, precauțiile de siguranță, funcționarea, depanarea, emisivitatea, precizia, specificațiile și întreținerea acestuia.
Preview Greenlee DM-40 Digital Multimeter Instruction Manual
User guide for the Greenlee DM-40 Digital Multimeter, detailing its features, operation, safety instructions, and specifications for electrical testing.
Preview Greenlee 1990 Dieless Hydraulic Crimping Tool Service Manual
Comprehensive service manual for the Greenlee 1990 Dieless Hydraulic Crimping Tool (Serial Codes WH and YM), detailing operation, maintenance, repair, safety, troubleshooting, and parts.