AMS F5848

AMS Radio-Controlled Wall Clock 5848

Model: F5848

1. Introducere

Thank you for choosing the AMS Radio-Controlled Wall Clock Model F5848. This modern silver wall clock is designed for precision timekeeping, automatically synchronizing with a radio time signal. Its elegant design, featuring a mineral glass and a large display, makes it a perfect addition to any room, especially a study. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your clock.

AMS Radio-Controlled Wall Clock 5848, front view

Figura 1.1: Faţă view of the AMS Radio-Controlled Wall Clock 5848. This image shows the round silver and white clock face with black hour, minute, and second hands. The numbers 1 through 12 are clearly visible, with the AMS logo and a radio signal icon below the 12 o'clock position. The outer ring is silver-toned, and the inner face is white.

2. Informații de siguranță

Please read all safety instructions carefully before using the clock. Keep this manual for future reference.

  • Siguranța bateriei:
    • Use only the specified type and size of battery.
    • Insert batteries with correct polarity (+ and -). Incorrect insertion may cause damage.
    • Nu amestecați baterii vechi cu noi sau diferite tipuri de baterii.
    • Remove exhausted batteries promptly to prevent leakage and damage.
    • If the clock is not used for a long period, remove the batteries to prevent leakage.
    • Nu lăsați bateriile la îndemâna copiilor.
  • Precauții generale:
    • Nu expuneți ceasul la temperaturi extreme, la lumina directă a soarelui sau la umiditate ridicată.
    • Evitați vibrațiile sau impacturile puternice.
    • Do not disassemble or modify the clock. This will void the warranty.
    • Clean the clock only with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Conținutul pachetului

Vă rugăm să verificați conținutul pachetului la deschidere. Dacă lipsesc sau sunt deteriorate articolele, contactați distribuitorul.

  • AMS Radio-Controlled Wall Clock (Model F5848)
  • Manual de utilizare (acest document)
  • (Battery may or may not be included depending on retailer/region)

4. Configurare

4.1. Instalarea bateriei

  1. Localizați compartimentul bateriei pe spatele ceasului.
  2. Deschideți capacul compartimentului bateriei.
  3. Insert one AA (or specified type) battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Închideți bine capacul compartimentului bateriei.

4.2. Initial Time Synchronization (Radio-Controlled)

Your AMS clock is radio-controlled and will automatically set itself to the correct time once batteries are installed and a signal is received. This process may take a few minutes to several hours depending on your location and signal strength.

  1. After inserting the battery, the clock hands will typically move to the 12 o'clock position and then stop. This indicates it is searching for the radio signal.
  2. Place the clock in an area with good radio signal reception. Avoid placing it near large metal objects, electronic devices, or in basements, which can interfere with the signal. A window-facing wall is often ideal.
  3. Once the signal is received, the clock will automatically adjust to the correct time. This usually happens within a few minutes, but can take longer.
  4. If the clock does not set itself after 24 hours, try relocating it to a different position or refer to the Troubleshooting section.

4.3. Montarea Ceasului

The clock is designed for wall mounting.

  1. Choose a suitable location on a wall, ensuring it is sturdy enough to hold the clock's weight (approx. 1.6 kg).
  2. Use an appropriate wall anchor and screw (not included) for your wall type.
  3. Hang the clock securely using the hanging slot on the back.

5. Funcționare

5.1. Afișare timp

The AMS Radio-Controlled Wall Clock displays time using traditional hour, minute, and second hands. The large display ensures easy readability from a distance.

5.2. Radio Signal Reception

The clock continuously monitors the radio time signal to maintain accurate time. In areas with poor reception, the clock may occasionally lose synchronization. It will attempt to re-synchronize automatically. If the signal is consistently weak, you may need to relocate the clock.

5.3. Manual Time Setting (If Applicable)

Most radio-controlled clocks do not have a manual time setting function, as they rely solely on the radio signal. If your clock has a small button or dial on the back (often labeled "M.SET" or similar), it may allow for manual adjustment in areas without signal. Refer to the specific markings on your clock's movement if automatic synchronization fails persistently.

6. Întreținere

6.1. Curatenie

To clean the clock, gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the finish or the mineral glass.

6.2. Înlocuirea bateriei

When the clock hands stop moving or the time becomes inaccurate, it is likely time to replace the battery. Follow the battery installation steps in Section 4.1. Always replace with a fresh, high-quality battery of the specified type.

6.3. Depozitare

If you plan to store the clock for an extended period, remove the battery to prevent potential leakage and damage to the movement.

7. Depanare

ProblemăCauza posibilaSoluţie
Clock hands do not move or stop.Dead or low battery. Incorrect battery polarity.Replace battery with a fresh one, ensuring correct polarity.
Clock shows incorrect time or fails to synchronize.Poor radio signal reception. Interference from other electronics.Relocate the clock to an area with better signal (e.g., near a window, away from electronics). Allow up to 24 hours for synchronization.
Clock loses time or gains time intermittently.Weak battery. Intermittent signal loss.Replace battery. Check for consistent signal reception.
Hands are misaligned (e.g., not pointing to 12 after reset).Internal mechanism issue or strong magnetic interference.Remove battery for 1 minute, then reinsert. Allow clock to re-synchronize. If problem persists, contact support.

8. Specificații

CaracteristicăDetaliu
MarcaAMS
Numărul de modelF5848
CuloareArgint
Dimensiuni produs (L x l x H)31 x 4 x 213 cm (Note: 213cm height seems incorrect for a wall clock, likely a data entry error. Assuming 31x31cm for a round clock based on feature bullets and image.)
Actual Product Dimensions (Diameter x Depth): 31 x 4 cm (approx.)
MaterialGlass (Mineral Glass), Aluminum (Brushed Aluminum finish on ring)
Greutatea articolului1.6 kilograme
Tip de afișareAnalogic
StilModern
Caracteristica specialăLarge display, Radio-controlled
Sursa de alimentareAlimentat cu baterie
Tip de camerăStudy Room (Suggested)
FormăRundă

Note: Product specifications are subject to change without notice.

9. Garanție și asistență

9.1. Informații despre garanție

Specific warranty terms and conditions for the AMS Radio-Controlled Wall Clock Model F5848 are provided by the manufacturer, AMS. Please refer to any warranty card included with your product or visit the official AMS webpentru informații detaliate despre garanție. Păstrați dovada achiziției pentru solicitări de garanție.

9.2. Asistență pentru clienți

Pentru asistență tehnică, depanare dincolo de acest manual sau solicitări de garanție, vă rugăm să contactați:

  • Your retailer where the product was purchased.
  • The official AMS customer support channels (refer to the AMS website pentru date de contact).

When contacting support, please have your model number (F5848) and purchase date ready.

Documente conexe - F5848

Preview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
Preview AMS Wall Clock Operating Instructions
Operating instructions for AMS wall clocks, covering battery installation, replacement, and general usage in multiple languages.
Preview ams AS5600L Adapter Board Eval Kit Manual
This manual provides comprehensive information for the ams AS5600L-WL_EK_AB adapter board, including kit contents, board description, mounting instructions, pinout details, I2C mode operation, hardware schematics, PCB layout, and ordering information.
Preview ams AS5048 14-bit Rotary Position Sensor User Manual
This user manual provides detailed information on the ams AS5048, a 14-bit rotary position sensor with digital angle and PWM output. It covers the AS5048 adapter board, mounting, pinout, operation cases (SPI, Daisy Chain), firmware coding examples, and hardware schematics. Essential for engineers integrating this sensor into their systems.
Preview ams AS5048 Adapter Board Evaluation Kit Manual
This manual details the ams AS5048 Adapter Board (AS5048-EK-AB), an evaluation kit for the AS5048 magnetic position sensor. It covers hardware, operation modes (SPI, I2C), software examples, and contact information for ams AG.
Preview AMS Clock Operating Instructions and Battery Replacement Guide
Instructions for operating and replacing the battery in AMS clocks, with multilingual guidance.