Manuale+

Hunter 44110

Manual de utilizare pentru termostatul programabil Hunter 44110 Set & Save 5+2

Model: 44110

1. Introducere

This manual provides detailed instructions for the installation, operation, and maintenance of your Hunter 44110 Set & Save 5+2 Programmable Thermostat. Please read these instructions carefully before beginning installation or operation to ensure proper function and to avoid potential damage.

2. Informații de siguranță

  • Întrerupeți întotdeauna alimentarea sistemului de încălzire/răcire de la siguranța principală sau de la panoul întrerupătorului de circuit înainte de a instala sau de a repara termostatul.
  • This thermostat is designed for indoor use only.
  • Do not short out the terminals on the gas valve or at the system controller to test the thermostat. This can damage the thermostat and void your warranty.
  • Ensure all wiring connections are secure and comply with local electrical codes. If you are unsure about any part of the installation, consult a qualified HVAC technician.
  • Nu lăsați bateriile la îndemâna copiilor. Dacă este înghițit, solicitați imediat asistență medicală.

3. Conținutul pachetului

Verificați dacă pachetul dvs. conține următoarele articole:

  • Hunter 44110 Programmable Thermostat Unit
  • Elemente de montare (șuruburi și ancore de perete)
  • Manual de utilizare (acest document)

Nota: Pentru funcționare sunt necesare 2 baterii AA și nu sunt incluse în pachet.

4. Instalare și configurare

4.1 Montarea termostatului

Choose a location for your thermostat that is away from drafts, direct sunlight, and heat sources. It should be mounted on an interior wall, approximately 1.5 meters (5 feet) above the floor.

  1. Turn off power to your heating/cooling system at the main circuit breaker.
  2. Scoateți termostatul vechi de pe perete.
  3. Separate the front cover of the Hunter 44110 thermostat from its base.
  4. Position the thermostat base against the wall and mark the mounting holes.
  5. Dați găuri pilot și introduceți ancore de perete, dacă este necesar.
  6. Secure the thermostat base to the wall using the provided screws.

4.2 Conexiuni de cablare

The Hunter 44110 thermostat is compatible with most 24V heating and cooling systems. Refer to the wiring diagram provided with your specific HVAC system or consult a professional if you are unsure. Connect the wires from your system to the corresponding terminals on the thermostat base.

Spate view of Hunter 44110 thermostat showing wiring terminals

Imagine: Spate view of the Hunter 44110 thermostat, illustrating the wiring terminal block for connecting to your HVAC system.

4.3 Instalarea bateriei

The thermostat requires two (2) AA alkaline batteries for operation. Install them into the battery compartment located on the back of the front cover, observing the correct polarity (+/-).

Interior view of Hunter 44110 thermostat with battery compartment and basic instructions

Imagine: Interior view of the Hunter 44110 thermostat, showing the battery compartment with two AA batteries installed, alongside basic operational instructions printed on the unit.

Once batteries are installed and wiring is complete, reattach the front cover to the base. Turn the power back on at the main circuit breaker.

5. Instrucțiuni de utilizare

Faţă view of Hunter 44110 programmable thermostat with LCD display and control buttons

Imagine: Faţă view of the Hunter 44110 programmable thermostat, displaying its LCD screen, 'F' (Function) button, and Up/Down arrow buttons for control.

5.1 Setarea orei și zilei curente

Refer to the full instructions at www.hunterfan.com for detailed steps on setting the current time and day. This is typically done by pressing a 'SET' or 'PROGRAM' button and using the Up/Down arrows to adjust values.

5.2 Programming the 5+2 Schedule

The 5+2 programming allows for separate schedules for weekdays (5 days) and weekends (2 days). This feature helps optimize energy usage.

  1. Access the program mode (consult full instructions for specific button presses).
  2. Set desired temperatures for up to four periods per day for weekdays.
  3. Set desired temperatures for up to four periods per day for weekends.
  4. Salvați programul.

5.3 Reglarea temperaturii

  • La view the Set Temperature: Press the Up or Down arrow button for less than 1 second. The display will show the current set temperature.
  • To change the Set Temperature: Press and hold the Up or Down arrow button until the display flashes. Then, press the Up or Down arrow button again to adjust the temperature to your desired setting.

5.4 System and Fan Modes

The thermostat features switches for selecting system and fan modes, typically located behind the front cover or on the side.

  • Moduri de sistem: HEAT, OFF, COOL. Select the appropriate mode for your desired operation.
  • Moduri ventilator: AUTO, ON. In AUTO mode, the fan runs only when the heating or cooling system is active. In ON mode, the fan runs continuously.

5.5 Temporary Overrides

You can temporarily override the programmed schedule by manually adjusting the temperature. The thermostat will maintain this new temperature until the next programmed period begins, or until you cancel the override.

6. Întreținere

6.1 Înlocuirea bateriei

The thermostat will display a battery logo when the batteries are low and need replacement. Replace with two (2) fresh AA alkaline batteries. Ensure correct polarity.

6.2 Filter Monitor Reset

Când

Documente conexe - 44110

Preview Manual de instalare și utilizare pentru termostatul programabil Hunter Set & Save, model 44110
Manual complet de instalare și utilizare pentru termostatul programabil Hunter Set & Save, model 44110. Include ghiduri de configurare, programare, caracteristici și depanare pentru un control optim al sistemului HVAC și eficiență energetică.
Preview Manual de utilizare a termostatului programabil Hunter Set & Save 110B Model 44110B
Manual de utilizare complet pentru termostatul programabil Hunter Set & Save 110B model 44110B, care acoperă instalarea, operarea, programarea și depanarea sistemelor HVAC.
Preview Hunter Programmable Thermostat Owner's Guide
Owner's guide for the Hunter Programmable Thermostat models 44668 and 44660, covering setup, programming, operation, features, troubleshooting, and warranty information.
Preview Manual de utilizare și ghid de instalare pentru termostatul Hunter 44200/44250
Ghid complet pentru instalarea, programarea și depanarea termostatelor Hunter modele 44200 și 44250. Aflați despre caracteristici, cablare și setări de economisire a energiei pentru un confort optim în locuință.
Preview Manual de utilizare al termostatului programabil Hunter One Touch Select 'n Save, model 42227
Manual de utilizare pentru termostatul programabil Hunter One Touch Select 'n Save, model 42227. Oferă instrucțiuni de instalare, programare, utilizare și depanare pentru controlul eficient energetic al climei locuinței.
Preview Manual de utilizare al termostatului programabil Hunter 47272
Manual de utilizare detaliat pentru termostatul programabil Hunter 47272, care acoperă programarea, instalarea, configurarea, caracteristicile, alertele, depanarea și informațiile despre garanție 5-1-1.