QSC RMX2450 Stereo Power AmpManual de utilizare mai viu

1.view

The QSC RMX2450 Stereo Power Amplifier is designed to provide reliable and high-quality audio amplification for professional sound systems. This amplifier features a robust power supply with a high-current toroidal transformer and ample filter capacitance, ensuring consistent performance even with demanding 2-ohm speaker loads. It incorporates a full complementary output circuit with linear output devices for ultra-low distortion and a flat frequency response. The RMX2450 is equipped with professional features such as independent defeatable clip limiters, selectable low-frequency filters, and versatile input/output connectivity options including barrier strip, XLR, 1/4-inch balanced inputs, and Speakon and binding post outputs. Efficient cooling is maintained by low-noise variable speed fans with rear-to-front airflow.

2. Informații de siguranță

Before operating the QSC RMX2450 amplifier, please read and understand all safety instructions. Retain this manual for future reference.

• Pericol de electrocutare: Nu deschideți amplifier chassis. Refer all servicing to qualified personnel.
• Sursa de alimentare: Connect the unit only to a power supply of the type specified in this manual and on the unit.
• Ventilare: Ensure proper ventilation. Do not block ventilation openings. Maintain adequate clearance around the amplifier for airflow.
• Umiditate: Nu expuneți unitatea la ploaie sau umezeală. Nu așezați obiecte umplute cu lichide pe unitate.
• Împământare: Always connect the power cord to a mains socket outlet with a protective earthing connection.
• curatenie: Disconnect the power cord before cleaning. Use a dry cloth only.

3. Configurare

3.1. Despachetarea și inspecția

Îndepărtați cu grijă ampScoateți dispozitivul din ambalaj. Verificați unitatea pentru a depista orice semne de deteriorare care ar fi putut apărea în timpul transportului. Dacă constatați deteriorări, contactați imediat distribuitorul.

3.2. Rack Mounting and Placement

The RMX2450 is designed for standard 19-inch equipment rack mounting. Secure the amplifier using all four mounting points to ensure stability. Ensure that the rack provides adequate ventilation, allowing for rear-to-front airflow. Avoid placing the amplifier near heat sources or in enclosed spaces without proper air circulation.

3.3. Comenzi și indicatori de pe panoul frontal

This image displays the front panel of the QSC RMX2450 amplifier. Visible features include the main power switch, individual gain controls for Channel 1 and Channel 2, and LED indicators for signal presence and clipping.

• Întrerupător: Comută amplifier's main power on or off.
• LED de alimentare: Se aprinde în verde când ampLifierul este pornit.
• Gain Controls (Channel 1 & 2): Rotary controls to adjust the input sensitivity for each channel.
• Signal LEDs (Channel 1 & 2): Green LEDs indicate the presence of an audio signal.
• Clip LEDs (Channel 1 & 2): Red LEDs illuminate when the output signal is clipping, indicating potential distortion.

3.4. Rear Panel Connections and Switches

This image shows the rear panel of the QSC RMX2450 amplifier. It highlights the XLR and 1/4-inch input connectors, Speakon and binding post output connectors, a circuit breaker, and various mode switches for configuration, including clip limiting, low-frequency filters, and bridge mono operation.

• Input Connectors (Channel 1 & 2): Balanced XLR and 1/4-inch TRS connectors for audio input. Barrier strip inputs are also available.
• Output Connectors (Channel 1 & 2): Speakon and binding post connectors for connecting loudspeakers.
• Comutatoare de mod: DIP switches for configuring various ampfuncții lifiere:
  • Clip Limiter: Engages or disengages the clip limiting function for each channel.
  • Low-Frequency Filters: Selectable filters (e.g., 30 Hz, 50 Hz) to protect speakers and optimize low-end response.
  • Stereo/Parallel/Bridge Mono: Configurează amplifier's operating mode.
• Întrerupător de circuit: Provides overload protection for the ampmai în viață.
• Priză de alimentare CA: Standard IEC connector for the detachable power cord.

4. Funcționare

4.1. Pornire și oprire

1. Ensure all connections are secure and gain controls are set to minimum.
2. Flip the front panel power switch to the 'ON' position. The Power LED will illuminate green.
3. To power off, turn down all gain controls, then flip the power switch to 'OFF'.

4.2. Conexiuni de intrare și ieșire

Conectați sursa audio (mixer, preamplificator)amplifier) to the input connectors (XLR, 1/4-inch, or barrier strip) on the rear panel. Connect your loudspeakers to the output connectors (Speakon or binding posts). Ensure correct polarity for all connections.

4.3. Setting Gain Levels

With the audio source playing at a normal operating level, slowly increase the amplifier's gain controls until the desired volume is achieved. Monitor the Signal and Clip LEDs. The Signal LED should flicker with audio presence, and the Clip LED should only flash momentarily on signal peaks. If the Clip LED stays illuminated, reduce the gain to prevent distortion and potential speaker damage.

4.4. Using Clip Limiters

The RMX2450 features independent defeatable clip limiters. When engaged via the rear panel DIP switches, these limiters reduce peak distortion without sacrificing dynamic range. It is generally recommended to keep clip limiters engaged to protect speakers from excessive clipping.

4.5. Configuring Low-Frequency Filters

The rear panel DIP switches allow selection of low-frequency filters (e.g., 30 Hz, 50 Hz). These filters help protect speakers from damaging sub-sonic frequencies and improve low-end tightness. Select the appropriate filter setting based on your loudspeaker's frequency response capabilities.

4.6. Bridge Mono Mode

For maximum power output into a single load, the RMX2450 can operate in Bridge Mono mode. Refer to the rear panel diagram and DIP switch settings for proper configuration. In this mode, only Channel 1 input is used, and the output is taken from specific binding posts or Speakon pins as indicated on the amplifier. Ensure the connected speaker impedance is suitable for bridge mono operation (typically 8 ohms).

5. Întreținere

5.1. Curatenie

Curățați periodic exteriorul amplifier with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation grilles are free from dust and debris to maintain proper airflow.

5.2. Ventilare

Verificați periodic dacă amplifier's ventilation openings are not obstructed. Proper airflow is crucial for preventing overheating and ensuring long-term reliability. If the amplifier is rack-mounted, ensure adequate space is provided around the unit.

6. Depanare

If you experience issues with your QSC RMX2450 amplifier, consultați tabelul următor pentru probleme și soluții frecvente.

If the problem persists after attempting these solutions, please contact QSC Customer Support.

7. Specificații

The following are key technical specifications for the QSC RMX2450 Stereo Power Ampmai în viață:

• Putere de iesire:
  • 500 wați pe canal la 8 ohmi (stereo)
  • 750 wați pe canal la 4 ohmi (stereo)
  • 1200 wați pe canal la 2 ohmi (stereo)
  • 1500 watts @ 8 ohms (bridge mono)
• Număr de canale: 2
• Voltage: 120 volți
• Greutatea articolului: 44.5 lire sterline
• Dimensiuni produs (L x l x H): 24 x 22 x 7 inci
• Tip de montare: Surface Mount (Rack Mountable)
• Temperatura de functionare: 50 Degrees Fahrenheit (recommended ambient)
• Specificație îndeplinită: FCC
• Producător: QSC
• Număr de model: QSC RMX2450
• ASIN: B0002BSRM0
• UPC: 684284003720

8. Garanție și asistență

8.1. Informații despre garanție

QSC products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official QSC website-ul.

8.2. Asistență pentru clienți

For technical assistance, service, or further information regarding your QSC RMX2450 Stereo Power Amplifier, please contact QSC Customer Support:

• Website: www.qsc.com
• Telefon: Refer to the QSC website-ul pentru numerele de contact regionale.
• E-mail: Refer to the QSC website pentru adrese de e-mail de asistență.