Introducere
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Sharp QS-2770H Two-Color Printing Calculator. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your device.
Figura 1: Față view of the Sharp QS-2770H Printing Calculator, showing the display, keyboard, and paper roll.
Înființat
1. Conexiune la alimentare
The Sharp QS-2770H calculator is AC-powered. Connect the provided AC adapter to the power input port on the back of the calculator and then plug it into a standard electrical outlet. Ensure the power switch is in the OFF position before connecting.
2. Instalarea rolei de hârtie
- Lift the paper roll arm located at the top rear of the calculator.
- Place a new paper roll (standard 2-1/4 inch width) onto the paper roll holder, ensuring the paper feeds from the bottom of the roll.
- Feed the leading edge of the paper into the printer slot until it emerges from the front of the printer mechanism.
- Lower the paper roll arm back into position.
Figura 2: lateral view illustrating the paper roll installation area.
3. Ink Ribbon Installation/Replacement
The calculator uses a two-color ink ribbon (Victor ink ribbon 7010 or equivalent). To install or replace:
- Asigurați-vă că calculatorul este oprit.
- Deschideți ușor capacul imprimantei.
- Remove the old ribbon cartridge if present.
- Insert the new ribbon cartridge, ensuring the ribbon is properly threaded through the guides and positioned correctly over the print head. Refer to the diagram on the ribbon cartridge for correct orientation.
- Închideți bine capacul imprimantei.
4. Setări inițiale
Before first use, or after a power interruption, you may need to set the date, decimal point, and rounding settings. Consult the specific key functions on your calculator's keyboard for these adjustments (e.g., DATA key, decimal selector switch).
Instrucțiuni de operare
The Sharp QS-2770H features a professional keyboard layout designed for efficient data entry and calculations.
Operații de bază
- Adunare/Scădere: Enter numbers and press + or -.
- Multiplication/Division: Enter numbers and press x or ÷. Presa = pentru a afișa rezultatul.
- Ștergeți intrarea (CE): Șterge ultimul număr introdus.
- Clear All (C/AC): Șterge toate intrările și calculele.
Funcții avansate
- Total mare (GT): Accumulates results of all calculations. Press GT to display the grand total.
- Markup (MU): Used for cost-sell-margin calculations.
- Percent Changes (%): Calculează procentultage increases or decreases.
- Automatic Tax Keys (TAX+, TAX-): Pre-set tax rates for quick tax calculations. Refer to your calculator's specific instructions for setting tax rates.
- Change Sign (+/-): Changes the sign of the displayed number.
- Număr de articole: Automatically counts the number of entries.
- Memory Functions (M+, M-, MR, MC): Store, recall, add to, or subtract from memory. The QS-2770H features two independent 4-key memories.
The large, fluorescent display provides clear visibility of numbers and operational symbols. The 4.8 lines-per-second ribbon printer ensures fast and legible printouts of your calculations.
Întreţinere
Curatenie
To maintain the calculator's appearance and functionality, regularly wipe the exterior with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no liquid enters the device. Do not use abrasive cleaners or solvents.
Ribbon and Paper Roll Replacement
Replace the ink ribbon when printouts become faint or inconsistent. Refer to the "Ink Ribbon Installation/Replacement" section under Setup for detailed steps. Replace the paper roll when it runs out, following the "Paper Roll Installation" steps.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Afișajul afișează „E” sau codul de eroare. | Calculation overflow, invalid operation, or internal error. | Presa C/AC to clear the error and restart the calculation. Ensure numbers are within the 12-digit capacity. |
| Nicio imprimare sau imprimare estompată. | Paper roll empty, paper not loaded correctly, or ink ribbon needs replacement. | Check paper roll and reload if necessary. Replace ink ribbon (Victor ink ribbon 7010). Ensure print mode is enabled. |
| Calculatorul nu pornește. | Power cord not connected, or power outlet issue. | Verify AC adapter is securely connected to both the calculator and a working electrical outlet. |
If problems persist after attempting these solutions, please contact Sharp customer support.
Specificații
Figure 3: Dimensions of the Sharp QS-2770H Printing Calculator.
| Caracteristică | Detaliu |
|---|---|
| Numele modelului | QS-2770H 12-Digit Professional Heavy-Duty Commercial Printing Calculator |
| Afişa | 12-Digit Fluorescent Display |
| Viteza de imprimare | 4.8 lines-per-second |
| Culori de imprimare | Two-color (Black/Red) |
| Sursa de alimentare | Alimentare AC |
| Dimensiunile produsului | 13.3 x 10 x 3 inci (L x l x înălțime) |
| Greutatea articolului | 4.8 lire sterline |
| Compatible Ribbon | Victor ink ribbon 7010 |
| Funcții cheie | Date, Markup, Percent Changes, Automatic Tax, Grand Total, Item Count, Change Sign, Two Independent 4-Key Memories |
Garanție și suport
Warranty information for the Sharp QS-2770H Printing Calculator is typically included with your purchase documentation. Please refer to the warranty card or contact Sharp customer service for details regarding coverage and terms.
For technical support, service, or additional inquiries, please visit the official Sharp Calculators store or contact their customer support channels. You can find more information at the Magazinul Sharp pe Amazon.
