Altec Lansing ATP3 3-Piece Speaker System User Manual

Introducere

This manual provides detailed instructions for the setup, operation, and maintenance of your Altec Lansing ATP3 3-Piece Speaker System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

The Altec Lansing ATP3 is a 3-piece computer speaker system designed to deliver quality audio. It consists of two satellite speakers and one subwoofer, providing a balanced sound experience for various applications.

Image: The Altec Lansing ATP3 3-Piece Speaker System, showcasing the two satellite speakers and the subwoofer unit.

Conținutul pachetului

Înainte de a continua configurarea, verificați dacă toate componentele sunt prezente în pachet:

1 x Altec Lansing ATP3 Subwoofer
2 x Altec Lansing ATP3 Satellite Speakers
1 x Audio Input Cable (3.5mm stereo jack)
1 x cablu de alimentare

Altec Lansing ATP3 Speaker System Packaging

Image: The retail packaging for the Altec Lansing Multimedia 3 Piece Speaker System, indicating the product contents.

Instrucțiuni de configurare

Plasare: Position the subwoofer on the floor or a sturdy surface near your computer. Place the two satellite speakers on your desk, equidistant from your listening position for optimal stereo imaging. Ensure the right satellite speaker is within easy reach as it houses the control knobs.
Conectați difuzoarele satelit: Connect the cables from the two satellite speakers to the corresponding output ports on the back of the subwoofer. Ensure a secure connection for both left and right channels.
Conectați-vă la sursa audio: Plug the 3.5mm audio input cable into the "Audio In" port on the subwoofer. Connect the other end of this cable to the audio output jack (typically green) on your computer or other audio device.
Conexiune de alimentare: Connect the power cable to the subwoofer and then plug it into a standard electrical outlet.
Pornire inițială: Turn the master volume knob on the right satellite speaker clockwise until you hear a click and the green indicator light illuminates. This indicates the system is powered on.

Altec Lansing ATP3 Speaker System Connections

Image: A visual representation of the Altec Lansing ATP3 system connected to an audio source (iPod), showing the subwoofer and satellite speaker connections.

Instrucțiuni de operare

The primary controls for the ATP3 system are located on the right satellite speaker.

Controlul volumului: The largest knob controls the overall volume of the system. Rotate clockwise to increase volume, counter-clockwise to decrease.
Controlul basului: Adjust this knob to increase or decrease the low-frequency output (bass) from the subwoofer.
Control înalte: Use this knob to adjust the high-frequency output (treble) from the satellite speakers.
Indicator de alimentare: A green LED on the right satellite speaker indicates that the system is powered on. To turn off the system, rotate the volume knob counter-clockwise until it clicks.

For optimal sound, start with the Bass and Treble controls at their mid-point and adjust to your preference. Ensure the volume on your audio source (computer, MP3 player) is also set to a reasonable level.

Întreţinere

Proper maintenance ensures the longevity and performance of your speaker system.

curatenie: Use a soft, dry cloth to wipe down the surfaces of the speakers and subwoofer. Avoid using liquid cleaners or abrasive materials, as these can damage the finish or internal components.
Ventilare: Ensure the subwoofer's vents are not obstructed to prevent overheating.
Mediu: Keep the speakers away from direct sunlight, excessive heat, moisture, and dust.
Organizare de cabluri: Avoid kinking or sharply bending the cables.

Depanare

If you encounter issues with your Altec Lansing ATP3 speaker system, refer to the following common problems and solutions:

Problemă	Cauza posibila	Soluţie
Nici un sunet	Sistemul nu este pornit. Cablurile nu sunt conectate corect. Volumul sursei audio este prea mic sau dezactivat. Ieșire audio selectată incorect pe computer.	Ensure the volume knob is turned on (green LED illuminated). Check all cable connections (power, satellite to subwoofer, audio input). Increase volume on the speakers and your audio source. Check if audio source is muted. Verify your computer's sound settings are configured to output audio through the correct device.
Sunet distorsionat sau neclar	Volumul este setat prea tare. Bass/Treble settings are unbalanced. Interferențe de la alte dispozitive.	Reduce the volume on both the speakers and the audio source. Adjust the Bass and Treble knobs to a balanced level. Move speakers away from other electronic devices that may cause interference.
Bâzâit sau bâzâit	Interferență în bucla de masă. Microphone/telephone functions on computer are active.	Try plugging the speakers into a different electrical outlet. In your computer's sound settings, mute or reduce the volume of microphone and telephone functions.

Specificații

Caracteristică	Detaliu
Numărul de model	ATP3
Tip difuzor	3-Piece Computer Speaker System (2 Satellites, 1 Subwoofer)
Satellite RMS Power	12 Watts per satellite
Putere RMS a subwooferului	18 wați
Driver subwoofer	6.5 inchi
Drivere de satelit	Two 28mm microdrivers, one 3-inch midbass speaker per satellite
Conectivitate	Wired (3.5mm audio input)
Controale	Volume, Bass, Treble (on right satellite)
Culoare	Negru
Material	Wood (subwoofer cabinet)
Greutatea articolului	10 lire sterline

Garanție și suport

The Altec Lansing ATP3 3-Piece Speaker System comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please contact Altec Lansing customer service. Refer to the official Altec Lansing website pentru cele mai recente informații de contact și resurse de asistență.

Vă rugăm să păstrați dovada achiziției în scopul garanției.

	Ghid de utilizare și configurare pentru sistemul de boxe pentru computer Altec Lansing ATP3 Ghid complet de utilizare pentru sistemul de boxe pentru computer Altec Lansing ATP3, care acoperă specificațiile, instrucțiunile de configurare, măsurile de siguranță și utilizarea comenzilor.
	Ghid de utilizare pentru sistemul audio amplificat cu trei piese Altec Lansing ACS33BW Ghid complet de utilizare pentru sistemul audio amplificat cu trei piese Altec Lansing ACS33BW, care acoperă configurarea, conexiunile, specificațiile și depanarea. Include informații de siguranță și detalii despre garanție.
	Altec Lansing ACS65i AmpGhidul utilizatorului sistemului de difuzoare lified Ghid de utilizare pentru Altec Lansing ACS65i ampsistem de difuzoare modernizat. Acest document oferă instrucțiuni detaliate privind configurarea, funcționarea, măsurile de siguranță, specificațiile și informațiile despre garanție pentru aplicațiile audio multimedia pentru computer.
	Ghid de pornire rapidă pentru boxă wireless Altec Lansing IMW1020 HydraMicro Începeți să utilizați boxa wireless Altec Lansing IMW1020 HydraMicro Everythingproof. Acest ghid de pornire rapidă oferă instrucțiuni despre configurare, asociere Bluetooth, comenzi, încărcare și asociere True Wireless Stereo (TWS).
	Ghid de pornire rapidă pentru căștile Altec Lansing AL Nanobuds 2.0 (MZX5000) Ghid de pornire rapidă pentru căștile wireless Altec Lansing AL Nanobuds 2.0 (MZX5000). Aflați despre asocierea Bluetooth, comenzile tactile, încărcare, gestionarea energiei și depanare.
	Altec Lansing Omni Jacket IMW678 Bluetooth Speaker Quick Start Guide Get started quickly with your Altec Lansing Omni Jacket IMW678 Bluetooth speaker. This guide covers package contents, button functions, charging, pairing via Bluetooth and NFC, using the Altec Connect app, multi-speaker connection, and auxiliary input. Includes technical support and FCC compliance information.