Introducere
Thank you for choosing the BUTURE BC02 Car Jump Starter with integrated 150PSI Air Pump and Power Bank. This versatile device is designed to provide emergency jump-starting for vehicles, inflate tires and other inflatables, and serve as a portable power source for your electronic devices. Please read this manual thoroughly before use to ensure safe and optimal performance.
Informații de siguranță
WARNING: This product contains Actinomycin D, a chemical known to the State of California to cause developmental toxicity and cancer. For more information go to www.P65Warnings.ca.gov
- Always wear safety glasses and gloves when operating the jump starter. Insulated gloves are provided for your safety.
- Nu porniți o baterie înghețată.
- Asigurați conexiunea cu polaritatea corectă (cheia roșieamp la pozitiv, negru clamp la negativ) pentru a evita scânteile sau deteriorarea.
- Nu permiteți cl roșu și negruamps să se atingă.
- Țineți aparatul departe de copii.
- Nu expuneți dispozitivul la ploaie sau temperaturi extreme.
- Do not over-inflate tires. Always check the recommended pressure for your specific tire.
- Utilizați numai accesoriile furnizate.
Conținutul pachetului
Vă rugăm să verificați pachetul pentru următoarele articole:
- BUTURE BC02 Jump Starter Unit
- Smart Jumper Cables (Red/Black)
- Furtun de aer
- Various Nozzles (for car, motorcycle, bicycle, ball, custom inflation)
- Cablu de încărcare USB-C
- Mănuși izolate
- Manual de utilizare
Produs terminatview
The BUTURE BC02 combines multiple essential functions into one compact device:
- Jump Starter: 5500A peak current for starting up to 9.0L Gas and 8.0L Diesel engines.
- Compresor de aer: 150PSI fast pump with smart preset and auto-stop for tire inflation.
- Power Bank: 7200mAh capacity with USB-A output and USB-C input for charging devices.
- Emergency Lights: 500 lumens with Flashlight, Strobe (White), Strobe (Red), and SOS modes.
Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Curentul de vârf | 5500A |
| Compatibilitate cu motor | Până la 9.0 l benzină / 8.0 l motorină |
| Presiunea compresorului de aer | 150 PSI |
| Capacitatea bateriei | 7200mAh |
| Intrare USB-C | 5V/2A, 9V/2A, 12V/1.5A (Fast Charge) |
| Ieșire USB-A | 5V/2.4A |
| Emergency Light Lumens | 500 lumeni |
| Certificari | ROHS, CE |
| Număr de baterii încorporate | 4 |
| Rata de conversie | >90% |
Configurare și încărcare inițială
Before first use, fully charge the BUTURE BC02 unit.
- Connect the provided USB-C charging cable to the USB-C input port on the BC02.
- Connect the other end of the USB-C cable to a suitable USB wall adapter (not included).
- The LED screen will display the charging status and battery percentage. Charge until it shows 100%.
Se recomandă încărcarea completă a dispozitivului la fiecare 3-6 luni pentru a menține bateria sănătoasă, chiar și atunci când nu este utilizat.
Instrucțiuni de operare
A. Jump Starting a Vehicle
- Ensure the BC02 unit is sufficiently charged (at least 50% recommended).
- Opriți contactul vehiculului și toate accesoriile.
- Insert the smart jumper cable plug into the jump starter port on the BC02. The indicator light on the clip will flash red and green alternately.
- Conectați cl. roșu (+).amp to the positive (+) terminal of your car battery.
- Conectați cl. negru (-).amp to the negative (-) terminal of your car battery.
- Once connected correctly, the indicator light on the smart clamp will turn solid green. If it flashes red, check connections or if the battery is too low.
- Porniți vehiculul în 30 de secunde.
- Odată ce vehiculul pornește, scoateți imediat clema.amps from the car battery, first the black (-) and then the red (+).
- Disconnect the smart jumper cable from the BC02 unit.
B. Tire Inflation
- Apăsați butonul de pornire pentru a porni dispozitivul.
- Connect the air hose to the inflation port on the BC02 and tighten it.
- Conectați celălalt capăt al furtunului de aer la supapa anvelopei.
- Short press the 'M' button to enter inflation mode. Use the 'M' button to cycle through 5 preset modes (Car, Motorcycle, Bicycle, Ball, Custom) or select a unit (PSI, BAR, KPA).
- Use the '+' and '-' buttons to set your desired pressure.
- Long press the inflation button (often indicated by a tire icon or 'I') for 3 seconds to start inflation.
- Pompa se va opri automat odată ce se atinge presiunea presetată.
- Disconnect the air hose from the tire valve and then from the BC02 unit.
C. Power Bank Functionality
Pentru a încărca dispozitivele electronice:
- Connect your device's USB charging cable to the USB-A output port on the BC02.
- The BC02 will automatically begin charging your device.
D. Emergency Lights
The BC02 features a powerful 500 lumen LED light with multiple modes:
- Press the light button once for Flashlight mode.
- Press again for Strobe (White) mode.
- Press a third time for Strobe (Red) mode.
- Press a fourth time for SOS mode.
- Press a fifth time to turn off the light.
Întreţinere
- Clean the device with a dry, soft cloth. Do not use harsh chemicals or abrasives.
- Depozitați dispozitivul într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
- Recharge the unit every 3-6 months to prolong battery life, even if not used.
- Păstrați porturile curate de praf și resturi.
Depanare
- Dispozitivul nu pornește:
- Ensure the device is charged. If completely drained, it may take a few minutes of charging before it responds.
- Jump starter not working / Smart clamp indicator flashing red:
- Verificați dacă clamps are connected to the correct battery terminals (red to positive, black to negative). Ensure the battery terminals are clean. The vehicle battery might be severely discharged; try the 'Force Start' function if available and safe to do so (consult vehicle manual).
- Air pump not inflating / not reaching desired pressure:
- Ensure the air hose is securely connected to both the device and the tire valve. Check for leaks in the hose or valve. Verify the desired pressure is set correctly. Ensure the device has sufficient charge.
- Dispozitivul nu se încarcă:
- Check the USB-C cable and wall adapter. Try a different cable or adapter. Ensure the charging port is clean.
Sfaturi pentru utilizatori
- Preîncărcare pentru situații de urgență: Always keep your BC02 fully charged, especially before long trips or during cold weather, as battery performance can be affected by temperature.
- Verificați periodic presiunea în anvelope: Use the built-in air pump to routinely check and maintain optimal tire pressure for better fuel efficiency and tire longevity.
- Keep accessories organized: Store all nozzles and cables in the provided carrying case to prevent loss and ensure they are readily available when needed.
- Understand the LED display: Familiarize yourself with the LED screen's indicators for battery level, pressure units (PSI, BAR, KPA), and error warnings to quickly diagnose issues.
Garanție și suport
BUTURE products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official BUTURE website-ul.
Vă rugăm să păstrați dovada achiziției pentru cererile de garanție.
