PHONEPACE 433MHz Universal Remote Control Cloner

Introducere

This instruction manual provides detailed guidance for the setup, operation, and maintenance of your PHONEPACE 433MHz Universal Remote Control Cloner. This device is designed to duplicate existing fixed-code remote controls for various applications such as garage doors, electric gates, and other 433MHz access systems. Please read this manual thoroughly before use to ensure proper functionality and to avoid potential issues.

Produs terminatview

The PHONEPACE 433MHz Universal Remote Control Cloner is a compact and durable device engineered for convenient duplication of fixed-code remote signals. It features four multi-function buttons, allowing you to clone up to four different functions from your original remote.

Caracteristici cheie:

• Universal Compatibilitate: Works with most 433MHz fixed-code garage doors, gates, and access systems.
• One-Touch Cloning: Easily copy up to 4 buttons from existing remotes.
• Recuperare eroare: Includes a function to restore accidentally cleared codes.
• Compact și durabil: Lightweight ABS casing designed for longevity.
• Distanta lunga: Equipped with an antenna for extended range.

Continutul pachetului:

• 1 x PHONEPACE 433MHz Universal Remote Control Cloner (Model: AFL-322-A)
• 1 x Baterie CR2016 (preinstalată)

Specificații

Important Note: This remote cloner is designed to duplicate fixed-code remotes only. It is NOT compatible with rolling-code (also known as hopping code) systems.

Instrucțiuni de instalare și operare

Follow these steps carefully to clone your existing remote control signals to the PHONEPACE Universal Remote Control Cloner.

1. Clear Existing Codes (Reset Remote)

Before cloning, you must clear any pre-existing codes from the cloner remote.

1. Press and hold Button I and Button II simultaneously for approximately 2 seconds. The LED indicator will flash three times.
2. While still holding Button I, release Button II.
3. Quickly press Button II three times. The LED indicator will flash rapidly.
4. Eliberați ambele butoane.
5. To verify the reset, press any button on the cloner remote. If the LED turns off immediately, the reset was successful. If the LED stays on, repeat the clearing process from step 1.

2. Copy Remote Signals (Cloning Mode)

Once the cloner remote is cleared, you can proceed to copy signals from your original remote.

1. Place your original remote control and the PHONEPACE cloner remote close together, ideally back-to-back or side-by-side, ensuring their antennas are aligned if possible.
2. Press and hold the desired button on your original remote. Simultaneously, press and hold the corresponding button on the cloner remote where you wish to store the code. Hold both buttons for approximately 2 seconds. The LED on the cloner remote will flash twice.
3. After 1 second, release the button on the cloner remote (keep holding the button on the original remote). The LED on the cloner remote will continue to flash rapidly.
4. Press the button on the cloner remote again. If the LED stays on solid, the cloning process for that button is successful.
5. Repeat steps 1-4 for any other buttons you wish to clone.

3. Restore Lost Codes (Backup Recovery)

If you accidentally clear the codes from your cloner remote after successful cloning, you can restore them.

1. Press and hold the bottom two buttons (III and IV) on the cloner remote simultaneously. The LED indicator will flash rapidly.
2. Eliberați ambele butoane.
3. Press any button on the cloner remote. The LED will stay on solid, indicating that the previously stored codes have been restored.

Depanare

Partial Button Issues (Some buttons work, others don't)

If some buttons on your cloner remote function correctly after cloning, but others do not, follow these steps:

1. First, clear all existing codes from the cloner remote (refer to "1. Clear Existing Codes" above).
2. Re-copy only the buttons that failed to clone successfully (refer to "2. Copy Remote Signals" above).
3. After attempting to re-copy the problematic buttons, clear all codes again (refer to "1. Clear Existing Codes").
4. Perform the backup recovery procedure (refer to "3. Restore Lost Codes"). This process will overwrite any faulty keys while preserving the ones that were working correctly.
5. Repeat these steps as necessary until all desired buttons on your cloner remote function properly.

Remote Not Cloning / LED Not Responding

• Verificați compatibilitatea: Ensure your original remote uses a fixed code and operates at 433MHz. This cloner is not compatible with rolling-code systems.
• Verificare baterie: Verify that both the original remote and the cloner remote have sufficient battery power. Replace the CR2016 battery in the cloner if needed.
• Proximitate: Make sure the original remote and the cloner are very close during the cloning process. Try different positions (back-to-back, side-by-side).
• Puterea semnalului: Some original remotes may have weaker signals. Try pressing the original remote's button firmly and consistently during cloning.
• Clear and Retry: Always start with a fresh clear of the cloner remote's memory before attempting to clone.

Sfaturi pentru utilizatori

• Optimal Cloning Distance: For best results, place the original remote and the cloner remote as close as possible, even touching, during the cloning process. This ensures a strong signal transfer.
• Verify Original Remote: Before attempting to clone, ensure your original remote is fully functional and has a fresh battery. A weak signal from the original remote can lead to cloning failures.
• Button Identification: The buttons are labeled I, II, III, and IV. You can assign any function from your original remote to any of these four buttons on the cloner.

Întreţinere

• curatenie: Wipe the remote cloner with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Înlocuire baterie: When the LED indicator becomes dim or the remote's range decreases significantly, it's time to replace the CR2016 battery. Carefully open the casing (if applicable, refer to product diagrams for battery compartment access) and replace the battery, ensuring correct polarity.
• Depozitare: Depozitați telecomanda într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.

Garanție și suport

For any questions, technical assistance, or support regarding your PHONEPACE 433MHz Universal Remote Control Cloner, please contact the seller or manufacturer directly. Please have your product model (AFL-322-A) ready when seeking support.