1. Produs terminatview
The POSEIDON Tattoo Kit BT03 is a comprehensive set designed for embroidery tattoo applications, offering a balance of power, precision, and user comfort. This kit includes a high-quality tattoo pen, a power supply, foot pedal, tattoo needles, and other essential accessories to get started.
2. Conținutul trusei
Your POSEIDON Tattoo Kit BT03 includes the following items:
- POSEIDON Tattoo Pen (Model BT03)
- Tattoo Power Supply (TPN-020 18V/1.5A)
- Pedala de picior
- Cablu de alimentare
- 10PCS Tattoo Needles (5x 1203RL, 5x 1207RS)
- Assorted Tattoo Inks
- Ink Cups
- Mănuși
- Bandage Wrap
- Hârtie de transfer
- Practice Skin
- Șervețele de curățare
3. Instrucțiuni de configurare
Follow these steps to set up your tattoo kit:
Assemble the Tattoo Pen
The tattoo pen is designed for comfortable handling and precise needle adjustment.
Figure 2: POSEIDON Tattoo Pen components and specifications. - Ensure all parts of the pen are securely assembled. The pen features a high-quality motor designed for quiet stability and less vibration.
- The pen's dimensions are approximately 12cm (4.72 inches) in length and 2.5cm (0.98 inches) in width, providing an ergonomic grip.
Figure 3: Tattoo Pen dimensions. Insert Tattoo Needle Cartridge
The kit includes safety cartridges that are sterilized with EO Gas.
Figure 4: Safety cartridges sterilized with EO Gas. - Gently push the desired needle cartridge into the front end of the tattoo pen until it clicks into place.
- To remove, twist slightly and pull the cartridge out.
Connect Power Supply and Foot Pedal
- Connect the power cord to the 'INPUT' port on the tattoo power supply.
- Plug the foot pedal into the designated foot pedal jack on the power supply.
- Connect the tattoo pen to the power supply using the DC jack cable.
Adjust Needle Length
The needle length can be adjusted by rotating the grip of the tattoo pen.
Figure 5: Adjusting needle length by rotating the pen grip.
For a visual guide, please refer to the setup video below:
4. Instrucțiuni de utilizare
Pornire
Plug the power supply into a suitable electrical outlet. The power supply has a green indicator light when active.
Ajustare Voltage
Use the rotary knob on the power supply to adjust the output voltage. The suggested working voltage for the BT03 tattoo pen is 6-9V, with an overall range of 5-12V. Ensure the power on current is below 2A.
Begin Tattooing
Press the foot pedal to activate the tattoo pen. The pen operates at a working frequency of 12000RPM and a speed of 10000RPM at 8V. The needle cartridges are designed for fast rebound, smooth, and unimpeded operation.
Figure 6: Needle cartridge features. Oprire
Release the foot pedal to stop the tattoo pen. Turn the voltage knob to '0' and unplug the power supply from the outlet.
5. Întreținere
Proper maintenance ensures the longevity and optimal performance of your tattoo kit:
Cleaning the Tattoo Pen
After each use, wipe down the exterior of the tattoo pen with a suitable disinfectant wipe. Do not immerse the pen in liquid. Ensure no liquids enter the motor housing.
Cartușe cu ace
Needle cartridges are single-use and pre-sterilized. Dispose of used cartridges safely in a sharps container immediately after use.
Alimentare și Cabluri
Keep the power supply and all cables clean and dry. Store them in a safe place away from moisture and extreme temperatures.
6. Depanare
Stiloul nu se aprinde
- Verificați toate conexiunile cablurilor pentru a vă asigura că sunt sigure.
- Verify the power supply is plugged into a working outlet and the indicator light is on.
- Asigurați-vă că voltage knob on the power supply is not set to '0'.
- Confirm the foot pedal is properly connected and functioning.
Weak or Inconsistent Pen Performance
- Reglați volumultage on the power supply. The suggested voltage este 6-9V.
- Ensure the needle cartridge is correctly inserted and not damaged.
- Check for any obstructions in the pen's mechanism.
Vibrații sau zgomot excesiv
- While the pen is designed for quiet operation, excessive vibration might indicate a loose component. Ensure the pen is fully assembled.
- Dacă problema persistă, contactați asistența pentru clienți.
7. Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Numărul de model | BT03 |
| Nume de marcă | Poseidon |
| Tip | Tattoo Kits |
| Material | Aluminiu |
| Ieșire Voltage | 4-12V |
| Suggested Voltage | 6-9V |
| Frecvența de lucru | 12000 RPM |
| Lungimea cursei | 3.5 mm |
| Speed (at 8V) | 10000 RPM |
| Culoare | Negru |
| Lungimea stiloului | 12 cm / 4.72 inchi |
| Pen Width | 2.5 cm / 0.98 inchi |
| Baterii incluse | Da |
8. Sfaturi pentru utilizatori
- The tattoo pen features a new hand-slip anti-slip design, ensuring a comfortable grip and reducing fatigue during extended use.
- The aluminum alloy protective layer at the needle cylinder interface enhances durability and wear resistance.
- Always ensure the power on current is below 2A to prevent damage to the power supply and pen.
- The pen's motor provides quiet stability, making tattoo activities more convenient and comfortable.
9. Garanție și asistență
For any questions, technical support, or warranty claims regarding your POSEIDON Tattoo Kit BT03, please contact the seller directly through the platform where you made your purchase. Provide your order details and a clear description of the issue for prompt assistance.
