Manual de utilizare pentru gravatorul laser SCULPFUN S9/S9 PRO

1. Introducere

The SCULPFUN S9/S9 PRO is a high-performance laser engraving and cutting machine designed for precision and versatility. Featuring advanced laser beam shaping technology, it offers exceptional cutting penetration and engraving accuracy across a wide range of materials. This manual provides essential information for safe operation, assembly, setup, and maintenance of your device.

2. Măsuri de siguranță

WARNING: Laser radiation can cause eye damage and skin burns. Always follow safety guidelines.

• When operating the laser engraving machine, always install the laser protective cover. If the cover is not installed, you must wear laser goggles.
• Do not touch the laser emitter with your hand, as it may cause burns.
• Avoid strong impact on the machine to prevent damage or misalignment.
• Children under 14 years old are not permitted to use this product. Children over 14 years old require adult supervision.
• The light engraving machine cannot be directly applied to any mirror-reflecting object, which may cause injury to the operator or burn the laser.
• Ensure adequate ventilation in the work area to dissipate fumes and smoke generated during engraving/cutting.
• Keep a fire extinguisher nearby when operating the machine.

3. Conținutul pachetului

Verificați dacă toate articolele enumerate mai jos sunt incluse în pachetul dumneavoastră:

• 1 × X-axis assembly
• 2 × X shaft
• 2 × Y shaft
• 1 × Control box module set
• 3 × Support feet
• 1 × Laser module set
• 1 × 12V 5A power adapter
• 1 × Power plug
• 1 × cablu USB
• 1 × Screw installation package (Steps 1-5)
• 2 × Belt
• 1 × T-shaped M5 screwdriver
• 1 × L-shaped M4 screwdriver
• 1 × L-shaped M3 screwdriver
• 10 × Legături de cablu
• 1 × 8-10mm nut wrench
• 1 × Brush
• 1 × Laser goggles
• 1 × 10x10cm wood chip (3mm thickness)
• 1 × 10x10cm wood chip (10mm thickness)
• 1 × A4 size steel desktop protection pad

4. Instructiuni de asamblare

The SCULPFUN S9/S9 PRO features a solid, easy-assembly full-metal structure. Assembly can typically be completed within 10-20 minutes by following the steps below and referring to the included screw installation package.

1. Step 1: Assemble the Frame. Connect the X and Y shafts to form the basic frame structure.
2. Step 2: Attach Support Feet. Secure the three support feet to the frame for stability.
3. Step 3: Install Control Box and Laser Module. Mount the control box module and the laser module onto the frame.
4. Step 4: Connect Belts and Wiring. Install the belts for movement and connect all necessary cables (USB, power).
5. Step 5: Final Adjustments. Ensure all screws are tightened and components are securely in place.

5. Configurare inițială

5.1 Focalizarea laserului

The S9 laser features a fixed focus lens and a sliding design for quick focusing. To focus, simply slide the laser module up or down until the laser spot is at its smallest point on your material, then tighten the screws to secure its position.

5.2 Instalare software

The machine is compatible with various mature engraving software. Install your preferred software on your computer:

• Sistem Windows: LaserGRBL, LightBurn, Benbox, GrblController, LiteFire.
• MAC System: LightBurn.

Sprijinit file formats include NC, BMP, JPG, PNG, DXF, SVG, AI, G-code, and other image formats. Connect the machine to your computer via the provided USB cable.

6. Funcționare

6.1 Pregătirea designului

Create or import your design using compatible software. Ensure your design is optimized for laser engraving or cutting, considering line thickness, detail, and material properties.

6.2 Material Placement and Measurement

Place your material on the work area. Use the integrated square measuring ruler on the X-axis and Y-axis to accurately position and measure your engraving objects. This helps in precise alignment and scaling of your designs.

6.3 Starting the Engraving/Cutting Process

Once your design is loaded and the material is positioned, set the appropriate parameters (power, speed, passes) in your software based on the material type and desired effect. Initiate the process from the software. Monitor the operation closely, especially for new materials or settings.

7. Compatible Materials and Capabilities

The SCULPFUN S9/S9 PRO utilizes advanced laser beam shaping technology to achieve high performance on a variety of materials.

7.1 Engraving Materials

• Wood, Paper, Cardboard, Plastic, White materials, PCB board, Aluminum oxide, 304 Stainless steel, Ceramic, Dark stone.

7.2 Cutting Materials

• Wood (up to 15mm thick)
• Plywood (up to 10mm thick)
• Acrylic (up to 10mm thick)
• Cardboard, Fabric, Bamboo, Plastic board, KT board.

8. Întreținere

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S9/S9 PRO.

• Curățarea lentilei: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain engraving quality.
• Lubrifiere: Apply a small amount of lubricant to the guide rails and moving parts to ensure smooth operation.
• Tensiunea curelei: Check the tension of the drive belts regularly. Adjust if they are too loose or too tight to prevent skipping or excessive wear.
• Zona de lucru: Keep the work area clean from debris and dust, especially the honeycomb panel if used, to prevent fire hazards and ensure proper airflow.
• Actualizări firmware: Check the official SCULPFUN website for any available firmware updates to ensure your machine has the latest features and improvements.

9. Depanare

Iată câteva probleme comune și posibilele lor soluții:

• Laserul nu se declanșează: Check power connections, USB connection to the computer, and ensure the laser module is securely seated. Verify software settings for laser power.
• Calitate slabă a gravării/tăierii: Ensure the laser is properly focused. Adjust power and speed settings in your software. Clean the laser lens. Check if the material is suitable for the chosen settings.
• Mașina nu se mișcă: Verify all motor connections and belt tension. Check if the software is properly connected and sending commands. Restart the machine and software.
• Inaccurate engraving: Check for loose belts or pulleys. Ensure the frame is rigid and not wobbling. Calibrate the machine if necessary (refer to software documentation).
• Software connection issues: Reinstall drivers if applicable. Try a different USB port or cable. Ensure no other programs are interfering with the laser software.

10. Specificații

11. Sfaturi pentru utilizatori

• For optimal cutting results on thicker materials, consider making multiple passes at lower power settings rather than a single high-power pass. This can reduce charring and improve cut quality.
• When engraving on reflective surfaces like stainless steel, a thin layer of matte black paint can improve laser absorption and result in clearer engravings.
• Experiment with different power and speed settings on scrap material before starting your main project to find the ideal parameters for your specific material and desired effect.
• The easy-expand design allows for increasing the engraving area by replacing longer metal beams. This is a great way to upgrade your machine for larger projects without buying a new one.

12. Garanție și asistență

SCULPFUN provides a one-year warranty for the S9/S9 PRO laser engraver. For technical support or any inquiries, please contact the seller or refer to the official SCULPFUN website. We aim for a 12-hour quick response to all customer queries.