Introducere
Thank you for choosing the Kemei KM-1990 Professional Hair Clipper. This manual provides detailed instructions for the safe and effective use, maintenance, and care of your new hair clipper. Please read this manual thoroughly before first use and keep it for future reference.
The Kemei KM-1990 is a versatile electric trimmer designed for professional and home use, featuring a powerful motor, patented angular blade, and an intuitive LCD display for battery status and turbo mode.
Conținutul pachetului
La deschiderea coletului, vă rugăm să verificați dacă toate articolele enumerate mai jos sunt prezente și în stare bună:
- Mașină de tuns Kemei KM-1990
- Cablu de încărcare
- Perie de curățare
- Ulei lubrifiant
- Piepteni de ghidare (diferite dimensiuni)
- Pelerină de coafură
- Scissors (hair cutting and thinning)
- Manual de utilizare (acest document)
For a visual guide to the package contents, please watch the unboxing video below:
Configurare și utilizare inițială
1. Charging the Clipper
The Kemei KM-1990 hair clipper is rechargeable and can be used cordlessly. Before first use, or when the battery indicator on the LCD display shows low charge, fully charge the device.
- Connect the charging cable to the clipper and a suitable power adapter (AC 110-240V, 50-60Hz).
- The LCD display will show the charging progress.
- A full charge takes approximately 3 hours. The clipper can work for about 120 minutes after a full charge.
2. Blade Alignment (Factory Set)
Your shears are carefully inspected to ensure that the blades are oiled and aligned before they leave the factory. If the blades are removed for cleaning or replacement, they must be re-aligned. To re-align:
- Simply match the top and bottom blade teeth point to point upwards.
- The ends of the top blade teeth should be approximately 0.5-1.0mm back from the bottom blade.
- Compare your scissor blades with the provided sketch (if available).
- If the blades are not aligned correctly, put a few drops of oil on the blades, turn the shears open for a while, close, and unplug them.
- Loosen the screw slightly and make adjustments until the blades are aligned, then tighten the screw.
3. Atașarea pieptenilor ghid
Select the desired guide comb for your preferred cutting length. The clipper comes with various sizes, including 1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm, 19mm, and 25mm.
- Asigurați-vă că mașina de tuns este oprită.
- Aliniați pieptenele ghid cu lama mașinii de tuns și împingeți-l ferm până când se fixează în poziție cu un clic.
- Pentru a-l scoate, trageți ușor pieptenele de pe lamă.
Instrucțiuni de operare
1. Pornirea/Oprirea și selectarea modului
- Apăsați butonul de alimentare pentru a porni sau a opri mașina de tuns.
- Ecranul LCD va afișa procentul baterieitage and current mode.
- The clipper features a powerful motor with both Standard and Strong (Turbo) modes. Use the appropriate button to switch between modes as needed for different hair types or cutting tasks.
2. Hair Cutting Techniques
The Kemei KM-1990 is suitable for various cutting styles, including wet and dry haircuts, electric length adjustment, sculpting, pushing white, and gradual trimming.
- Always start with a longer guide comb than you think you need, and gradually reduce the length.
- Hold the clipper flat against the head and move it slowly against the direction of hair growth.
- For detailed work or fading, use the clipper without a guide comb, adjusting the blade lever for precise cutting lengths (1.1mm - 2mm minimum cutting length).
- The clipper features automatic power selection based on bristle density, ensuring consistent performance.
Întreținere și îngrijire
1. Curățarea lamelor
- After each use, turn off the clipper and remove the guide comb.
- Folosiți peria de curățare furnizată pentru a îndepărta firele de păr desprinse de pe lame.
- The blades are designed for washing under water. You can rinse the blade assembly under running water. Ensure the clipper body is not submerged.
- Lăsați lamele să se usuce complet la aer înainte de a le reatașa sau depozita.
2. Ungerea lamelor
To keep your shears in top condition, the blades should be oiled every few haircuts. To oil it properly:
- Asigurați-vă că mașina de tuns este curată și uscată.
- Apply a few drops of the provided lubricating oil across the top of the blades.
- Porniți mașina de tuns timp de câteva secunde pentru a distribui uniform uleiul.
- Ștergeți orice exces de ulei cu o cârpă moale.
3. Depozitare
Depozitați mașina de tuns într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de umiditate. A nu se lăsa la îndemâna copiilor.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Mașina de tuns nu pornește. | Baterie descărcată sau neîncărcată. | Încărcați complet mașina de tuns (aproximativ 3 ore). Asigurați-vă că este conectat corect cablul de încărcare. |
| Mașina de tuns trage părul sau taie neuniform. | Blades are dull, dirty, or misaligned. Insufficient oil. | Clean and oil the blades. Check blade alignment and adjust if necessary. If blades are dull, consider replacement. |
| Mașina de tuns funcționează încet sau cu putere redusă. | Low battery or hair buildup in the motor. | Charge the clipper. Clean the blades and ensure no hair is obstructing the motor area. |
If you encounter issues not listed here, please refer to the full user manual PDF or contact customer support.
Specificații
| Caracteristică | Detaliu |
|---|---|
| Model | KM-1990 |
| Alimentare electrică | Rechargeable (Mains and battery operation) |
| Putere | 5W |
| Voltage | AC 110-240V (<20V internal operating voltage) |
| Frecvenţă | 50-60Hz |
| Timp de încărcare a bateriei | Approx. 3 hours (up to 2 hours mentioned in product properties) |
| Battery Life / Use Time | Approx. 120 minutes (over 90 minutes mentioned in product properties) |
| Materialul lamei | Oţel inoxidabil |
| Tip motor | ROTATIV |
| Funcții | Electric length adjustment, wet haircut, dry haircut, automatic power selection based on bristle density, washing knives under water, fast charging, charging indication |
| Lungimea minimă de tăiere | 1.1 - 2 mm |
| Lungime maximă de tăiere | 11 - 20 mm |
| Metoda de ajustare a lungimii | Schimbarea duzelor |
| Numărul de duze | 5 or more pieces |
| Scop | For beard and mustache, for the head |
| Material | ABS+Metal |
| Certificari | 3C, CE, CCC |
Garanție și suport
The following guarantees are offered for the product:
- The product is manufactured and inspected through strict quality control.
- If a fault occurs during correct use, the consumer is entitled to a free warranty service at the purchasing shop or our repair centre in accordance with the warranty card. (Batteries and blades are consumables and are not included in the warranty and are subject to payment).
Free service will not be provided in the following cases:
- Damage caused by unapproved repairs or alterations.
- Damage caused by incorrect or negligent use or accident.
- Damage caused by natural disasters or voltage anomalii.
- Due to neglect of product specifications.
For more detailed information, please refer to the official user manual PDF: Kemei KM-1990 User Manual (PDF)
Sfaturi pentru utilizatori
- Pre-trimming: For very long hair, it's often helpful to trim it roughly with scissors before using the clipper to avoid clogging and ensure a smoother cut.
- Curățenia este esențială: Regularly clean and oil your clipper blades to maintain sharpness and prolong the life of the device. This prevents pulling and ensures a smooth cut.
- Managementul bateriei: Keep an eye on the LCD battery display. Charging the clipper before it completely drains can help maintain battery health over time.
- Experiment with Guards: Don't be afraid to try different guide comb sizes to find the perfect length for your desired style.
