Manual de utilizare pentru pornitorul de acumulator Baseus 1200A

Introducere

Thank you for choosing the Baseus 1200A Jump Starter. This device is a powerful and versatile tool designed to provide emergency jump-starting for vehicles, act as a portable power bank for electronic devices, and offer emergency lighting. Please read this manual thoroughly before use to ensure safe and optimal performance.

The Baseus 1200A Jump Starter, ready for various vehicles.

Informații de siguranță

Your safety is paramount. This jump starter is equipped with multiple protection features. Always follow these guidelines to prevent injury or damage to the device and your vehicle.

Smart Clamp cu protecție la polaritate inversă

Deșteptul clamps feature an upgraded relay that intelligently monitors voltage and current, automatically cutting off power when a dangerous condition is detected, such as incorrect polarity connection. This protects both the user and the vehicle battery.

Detaliat view al cl-ului inteligentamp tehnologie.

12 Battery Protections

The device incorporates comprehensive safety measures:

• Overvoltage protectie
• Subervoltage protectie
• Protecție la supraîncălzire a încărcării
• Protecție la supraîncălzire la descărcare
• Încărcați protecție la temperatură scăzută
• Descărcați protecția la temperatură scăzută
• Protecție la supracurent
• Protecție la supradescărcare
• Protectie inversa polaritatii
• Protecție la scurtcircuit
• Protecție la expirarea timpului de pornire
• Protecție anti-încărcare inversă

Visual representation of the 12 battery protection features.

Note importante de siguranță

• Always check the battery level of the jump starter before use. Do not use if the battery level is below 50% or if the product is overheating.
• Ensure the EC5 plug is completely and properly inserted into the jump starter. Improper connection can affect performance and potentially damage the port.
• Do not attempt to jump start your car at a very high frequency. Allow at least 30 seconds between two consecutive starting attempts.
• Start your car immediately after connecting the alligator clips and the jump starter.
• If the car fails to start, check if the alligator clips are connected properly. Inspect contacts for rust or dirt and clean if necessary. If the car fails to start three times in a row, stop using the product to avoid potential damage.

Key safety precautions to observe during operation.

Conținutul pachetului

La despachetare, vă rugăm să vă asigurați că sunt prezente toate următoarele articole:

• Baseus 1200A Jump Starter
• Smart Clamps (with EC5 connector)
• Cablu de încărcare USB-A la USB-C
• Manual de utilizare

Toate articolele incluse în pachetul produsului.

Specificații

Detailed technical specifications for the Baseus 1200A Jump Starter:

Dimensiunile produsului și specificațiile detaliate.

Configurare și încărcare

Încărcarea Jump Starter-ului

Before first use, fully charge the jump starter. Use the provided USB-A to USB-C cable and a compatible USB power adapter (not included) to charge the device via its Type-C input port. The digital display will show the real-time battery level, so you can easily monitor its charge status.

Digital display showing the battery level.

Timp de așteptare

The Baseus Jump Starter is designed for a 6-month standby time on a single charge. It automatically enters a low-consumption mode to prevent self-discharge during extended periods of inactivity.

The jump starter's internal design for long standby time.

Instrucțiuni de operare

Pornirea unui vehicul

Urmați acești pași pentru a porni vehiculul în siguranță:

1. Conectați Smart Clamps: Conectați smart clampîn portul EC5 al demarorului. Indicatorul de pe clamps vor clipi alternativ în roșu și verde.
2. Conectați la bateria mașinii: Open the engine hood of your car. Connect the red clamp to the positive (+) terminal of your car battery and the black clamp to the negative (-) terminal. Ensure polarities are connected properly.
3. Porniți-vă mașina: Go back into your car and start it. The jump starter will discharge high voltage după ce este conectat.
4. Deconectați imediat: După ce mașina pornește, deconectați imediat de la bateria mașinii.

Note importante pentru pornirea asistată:

• For best effect, ensure the jump starter's battery level is above 50%.
• For zero-voltage starts (completely dead battery), ensure the jump starter's battery level is above 75%.
• Keep the entire jump start process within 30 seconds for it to be successful.

Step 1: Connecting the smart clamps.

Step 3: Starting the vehicle.

Emergency Light Functions

The jump starter is equipped with an LED light for various emergency situations:

• Mod iluminare de urgență: Provides normal lighting for camping sau explorarea.
• Modul SOS: Flashes alternately to signal for help.
• Mod stroboscop: Emits alarmingly bright flashes to scare away danger or attract attention.

Different modes of the emergency light.

Using the emergency light for safety.

Funcționalitatea bateriei externe

The jump starter features USB output ports (USB 1 and USB 2, both 5V/3A) that can be used to charge various electronic devices such as smartphones, tablets, and more.

Depanare

If you encounter issues while using the jump starter, consider the following:

• Car Fails to Start:
• Ensure the jump starter's battery level is sufficient (above 50% for normal start, 75% for zero-voltage start).
• Verify that the smart clamps are securely and correctly connected to the car battery terminals (red to positive, black to negative).
• Check the car battery terminals and clamp contacts for rust or dirt. Clean them thoroughly if present.
• Do not attempt to jump start more than three times consecutively. If it fails after three attempts, stop and seek professional assistance to avoid damaging the product or your vehicle.
• Jump Starter Not Functioning:
• Ensure the EC5 plug of the smart clamps is fully and correctly inserted into the jump starter's port.
• Check if the jump starter is overheating. If so, allow it to cool down before attempting to use it again.

Întreţinere

Proper maintenance will extend the life and performance of your Baseus Jump Starter:

• Încărcare: For optimal battery health, recharge the jump starter at least once every 3-6 months, even if it hasn't been used.
• Depozitare: Depozitați dispozitivul într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
• curatenie: Use a soft, dry cloth to clean the exterior of the jump starter. Do not use harsh chemicals or abrasive materials.
• Clamps: Păstrați clemele inteligenteampeste curat și fără coroziune.

Sfaturi pentru utilizatori

• Compatibilitate cu motoarele diesel: This jump starter is suitable for 12V 2.5L diesel engines, as well as 12V 6.0L gasoline engines.
• Extreme Weather Performance: Thanks to its IC protection chip, the jump starter is designed to operate effectively even in extreme cold, down to -20°C, and hot conditions up to 60°C.
• Air Travel Safe: The device conforms to international air transport regulations, making it safe to bring on a plane.

Reliable performance in cold winter conditions.

The jump starter is safe for air travel.

Garanție și suport

For warranty information, technical support, or any product-related inquiries, please contact Baseus customer service through their official channels or the retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.