Manual de utilizare pentru instrumentul de diagnosticare auto XTOOL InPlus IP500-BMR

1. Introducere

The XTOOL InPlus IP500-BMR is a versatile automotive diagnostic tool specifically designed for BMW, MINI, and Rolls-Royce vehicles. It offers comprehensive OE-level full system diagnostics, advanced ECU coding, bi-directional control, and a wide range of special maintenance functions. This manual provides detailed instructions for setting up, operating, and maintaining your IP500-BMR device to ensure optimal performance and accurate vehicle diagnostics.

2. Informații de siguranță

Please read and understand all safety instructions before using the XTOOL InPlus IP500-BMR device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always operate the vehicle in a well-ventilated area.
• Purtați echipament individual de protecție adecvat, cum ar fi ochelari de protecție și mănuși.
• Nu purtați haine largi sau bijuterii care s-ar putea prinde în piesele în mișcare.
• Țineți dispozitivul departe de apă, ulei și alte lichide.
• Asigurați-vă că contactul vehiculului este oprit înainte de a conecta sau deconecta instrumentul de diagnosticare.
• Evitați atingerea componentelor fierbinți ale motorului sau a sistemelor de evacuare.
• Nu încercați să dezasamblați sau să modificați dispozitivul.
• Folosiți doar cablurile și accesoriile furnizate.
• Țineți copiii și personalul neautorizat departe de zona de lucru.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• 1 x IP500 Tablet
• 1 x Diagnostic Main Line (OBDII Main Cable)
• 1 x USB-Type C Charging Cable
• 1 x Quick Boot Guide (User Manual)
• 1 x Carry Case

4. Specificații

5. Configurare

5.1 Device Activation and Registration

1. Power on the IP500-BMR device.
2. Follow the on-screen prompts to register and activate the device using your email address and the product's serial number.
3. Ensure a stable internet connection (Wi-Fi 2.5 & 5GHz supported) for activation and updates.

5.2 Conectarea la vehicul

1. Locate the vehicle's OBD-II port, usually under the dashboard on the driver's side.
2. Asigurați-vă că contactul vehiculului este oprit.
3. Connect the Diagnostic Main Line (OBDII Main Cable) to the IP500-BMR device.
4. Connect the other end of the Diagnostic Main Line to the vehicle's OBD-II port.
5. Rotiți contactul vehiculului în poziția „ON” (motorul oprit).

5.3 Setarea limbii

The default language is English. To change the language:

1. After activating the device, contact the seller with your device's serial number to authorize the desired language.
2. Navigate to 'Settings' on the device.
3. Selectați „Limbă” și alegeți limba preferată din listă.
4. Click 'Update Device' to apply the language change and download necessary language packs.

5.4 Actualizare software

The XTOOL InPlus IP500-BMR offers lifetime free updates for all functions. Regular updates ensure compatibility with the latest vehicle models and provide new features.

1. Asigurați-vă că dispozitivul este conectat la o rețea Wi-Fi stabilă.
2. On the main menu, tap 'Updates'.
3. The device will check for available updates. Follow the on-screen instructions to download and install any new software versions.

6. Instrucțiuni de utilizare

6.1 Navigație generală

The IP500-BMR features a 5.45-inch touch screen for intuitive navigation. The main menu typically includes options like 'Auto Scan', 'Diagnosis', 'OBD II', 'Special Functions', 'Updates', and 'More'.

6.2 Diagnosticare completă a sistemului

This function allows you to access and scan all available vehicle modules (e.g., Engine, Transmission, ABS, Airbag, Brakes, Body, Chassis, HVAC) to:

• Citiți informațiile ECU
• Read Trouble Codes (DTCs)
• Coduri de eroare clare
• Read Frozen Frame data
• View Live Data (e.g., engine rpm, misfire, coolant temp, ABS wheel speed sensor, transmission fluid temperature)

6.3 Advanced ECU Coding for BMW/MINI/Rolls-Royce

ECU Coding allows for re-flashing vehicle control modules, updating software, or reprogramming components. This can address issues like drivability, fuel efficiency, power loss, and fault codes.

• Enable or Disable Specific Functions: Activate features like seat heating, automatic headlights, or disable start/stop systems.
• Adapting Replaced or Upgraded Parts: Ensure new hardware is compatible and functions correctly.
• Regional and Market Adjustment: Adjust vehicle configurations for different regions (e.g., instrument language, temperature unit, navigation system).
• Optimize Driving Experience: Fine-tune throttle response or automatic transmission shifting conditions.
• Depanare și întreținere: Clear non-critical fault codes, restore factory settings, or recalibrate systems.
• Safety and Comfort Settings: Customize ADAS sensitivity, automatic door locking speed, turn signal flashes, welcome light settings.

Note: ECU Coding is not available for all vehicles. Please check compatibility with your VIN before attempting.

6.4 Control bidirecțional / Test activ

This function allows the scanner to send commands to vehicle ECUs to perform various active tests, helping to precisely locate problems and save diagnostic time.

• Exampmai puține teste active: Injector Tests, Fuel Injector Balance, Compression Test, Cooling Fan, A/C Clutch On/Off, ABS Motor Pump, Windows/Wipers/Sunroof/Doors.
• Beneficii: Precisely locate problems, save time and cost, enable real-time adjustments and repairs.

Note: Available active tests vary by vehicle system.

6.5 23+ Special Maintenance Services

The IP500-BMR supports over 23 special functions for routine maintenance and service resets:

• Resetare martor ulei: Reset the oil life system and turn off the oil light.
• EPB (frână electronică de parcare): Reset the brake pad after repairs.
• Calibrare SAS (senzor unghi de direcție): Perform calibration and clear fault records.
• BMS (Sistem de management al bateriei): Re-match control module and motoring sensor for accurate battery detection.
• Codarea injectoarelor: Write or rewrite fuel injection nozzle codes after replacement.
• Reînvățare A/C: Reset compressor operation data and servo motor position for AC system diagnosis.
• Other Supported Functions: Gearbox Match, Suspension, Language Change, Transport Mode, Window Initialization, Seat Calibration, Headlight Adjustment, Start/Stop Reset, Nox Reset, SRS, A/F Settings, DPF, Throttle Relearn, ABS Bleeding, EGR Relearn, Rain/Light Sensor, Clutch Adaptation, and more.

Note: Please provide your specific car model and VIN number to check compatibility before purchasing.

6.6 Full 10 OBD2 Functions (for All Cars)

The IP500-BMR supports all 10 modes of OBD2 tests for general vehicle diagnostics, not limited to BMW/MINI/Rolls-Royce:

1. Citiți codurile de eroare
2. Coduri de eroare clare
3. Date live
4. Citiți Înghețați cadru
5. Citiți informațiile ECU
6. Testarea componentelor
7. Test de monitorizare la bord
8. Test de monitorizare a senzorului de O2
9. Pregătirea I/M
10. Citiți informațiile despre vehicul

6.7 VIN automat și scanare automată

Automatically identifies the vehicle's VIN (Vehicle Identification Number) to quickly read basic vehicle information, simplifying the diagnostic process and improving accuracy.

6.8 4-in-1 Live Data Graph

Graphically displays up to four different real-time data streams simultaneously on one screen. This allows for easy monitoring and analysis of data from multiple sensors or systems (e.g., engine rpm, vehicle speed, accelerator position, fuel injection volume). Data streams can be exported as CSV files for storage and comparison.

6.9 Diagnostic Report Share & Print

Generate detailed diagnostic reports including fault codes, system status, and test results. Reports can be shared or printed, aiding in record-keeping and communication with other technicians or vehicle owners.

6.10 DTC Look-Up Library

Provides a database for vehicle trouble codes (DTCs). Enter a fault code to get a description, possible causes, and recommended fixes, shortening diagnosis time.

6.11 Volumul bateriei autotage Test

Measures the battery's quiescent voltage și voltage at engine start to assess battery health, providing suggestions for maintenance or replacement.

7. Vehicule acceptate

The XTOOL InPlus IP500-BMR is specifically designed for BMW, MINI, and Rolls-Royce vehicles, covering a wide range of models worldwide.

7.1 BMW Vehicles

• Seria 1: E81, E82, E87, E88, F20, F21, F40, F52, F70, E81.
• Seria 2: F22, F23, F44, F45, F46, F87, G42, U06, G87.
• Seria 3: E30, E36, E46, E90, E91, E92, E93, F30/31, F34/35, F80, G20, G21, G28, G80, G81.
• Seria 4: F32, F33, F36, F82, F83, G22, G23, G26, G82, G83.
• Seria 5: E34, E39, E60, E61, F07, F10, F11, F90, G30, G31, G38, G60, G61, G68, G90.
• Seria 6: E63, E64, F06, F12, F13, G32.
• Seria 7: E32, E38, E65, E66, E67, E68, F01, F02, F03, F04, G11, G12, G70, G73.
• Seria 8: E31, F91, F92, F93, G14, G15, G16.
• I Series: I01, I12, I15, I20.
• Seria X: E53, E70, E71, E72, E83, E84, F15, F16, F25, F26, F39, F48, F49, F85, F86, F95, F96, 97, F98, G01, G02, G05, G06, G07, G08, G09, G18, G45, M12, M13, U10, U11, U12.
• Seria Z: E30, E36, E52, E85, E86, E89, G29.

7.2 MINI Vehicles

• F54, F55, F56, F57, F60, F65, F66, J01, J05, R50, R52, R53, R55, R56, R57, R58, R59, R60, R61, U25.

7.3 Rolls-Royce Vehicles

• RR1, RR11, RR12, RR2, RR21, RR22, RR25, RR3, RR31, RR4, RR5, RR6.

8. Întreținere

8.1 Actualizări de software

Regularly check for and install software updates to ensure your device has the latest features, bug fixes, and vehicle compatibility. Connect to Wi-Fi and use the 'Updates' function on the main menu.

8.2 Îngrijirea dispozitivului

• Păstrați dispozitivul curat și fără praf și resturi. Folosiți o cârpă moale și uscată pentru curățare.
• Evitați expunerea dispozitivului la temperaturi extreme sau la lumina directă a soarelui.
• Store the device in its protective carry case when not in use.
• Do not use harsh chemicals or abrasive cleaners on the screen or casing.
• Ensure the charging cable and diagnostic cable are not damaged.

9. Depanare

9.1 Probleme comune și soluții

10. Sfaturi pentru utilizatori

• Schimbare de limbă: Remember that English is the default language. If you require a different language, you must contact the seller with your device's serial number *before* attempting to change it in the settings.
• Compatibilitate vehicul: Always verify the compatibility of specific functions (like ECU Coding or Active Tests) with your car's brand, model, year, and VIN before purchasing or attempting the function. You can use the XTOOL Official Website's function query tool for this.
• Actualizări gratuite pe viață: Ia avanstage of the lifetime free updates to keep your device current with the latest vehicle models and diagnostic capabilities. Regularly check for updates via Wi-Fi.
• Rapoarte de diagnosticare: Utilize the diagnostic report feature to save and share detailed information about your vehicle's health. This can be very helpful for tracking issues over time or consulting with other mechanics.

11. Garanție și asistență

11.1 Garanție

The XTOOL InPlus IP500-BMR comes with a 2-year warranty.

11.2 Suport tehnic

XTOOL provides 24-hour online service and professional technical support. For any questions or assistance, please refer to the XTOOL Official Website-ul sau contactați direct echipa lor de asistență.

• XTOOL Official Website: https://www.xtooltech.com/english/FunctionQuery.html
• Contactarea asistenței: Refer to the contact information provided with your product or on the official website pentru canale de asistență directă.