1. Introducere
The SmallRig Horizontal-to-Vertical Mount Plate 4424 is an accessory designed for use with Sony Alpha 7C II and Alpha 7CR cameras, specifically when paired with the SmallRig Cage 4422 or Baseplate 4438. This mount plate enables quick and seamless switching between horizontal and vertical shooting orientations without the need to adjust the lens optical axis. It ensures full access to the camera's LCD flip screen, battery door, card slot, and other ports. The design incorporates built-in pads to prevent scratches and twisting, ensuring a secure fit for your camera.
2. Conținutul pachetului
Vă rugăm să verificați dacă toate articolele sunt prezente în coletul dumneavoastră:
- Lens Collar Mount Plate x 1
- Cheie Allen x 1
3. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | 4424 |
| Cage Type | Camera Cage Accessory |
| Dimensiuni produs (LxAxD) | 118 x 72.5 x 58.3 mm |
| Greutatea produsului | 110 ± 5g |
| Material (e) | Aliaj de aluminiu, oțel inoxidabil |
| Puncte de montare | 1/4"-20 threaded holes, 3/8"-16 threaded hole |
| Quick Release Compatibility | Arca-Swiss, Manfrotto RC2, DJI RS-series gimbals |
4. Compatibilitate
This mount plate is designed to be used with the following SmallRig products and camera models:
- SmallRig Cage Kit for Sony Alpha 7C II / Alpha 7CR (Model 4422)
- SmallRig Bottom Mount Plate for Sony Alpha 7C II / Alpha 7CR (Model 4438)
Additionally, the mount plate is compatible with:
- Arca-Swiss type tripods
- Manfrotto RC2 type tripods
- DJI RS-series gimbals
5. Configurare și instalare
Note importante:
- This product requires either the SmallRig Cage 4422 or Baseplate 4438 for proper use.
- Always remove the camera lens before installing the mount plate to prevent damage.
Pașii de instalare:
- Attach to Cage/Baseplate: Align the mount plate with the designated mounting points on your SmallRig Cage 4422 or Baseplate 4438.
- Secure to Camera: Once aligned, use the provided Allen wrench to securely fasten the mount plate to the cage/baseplate, which is already attached to your Sony Alpha 7C II / Alpha 7CR camera. Ensure all screws are tightened firmly but do not overtighten.
- Verificare finală: Verify that the mount plate is stable and does not wobble.
6. Funcționare
Switching Between Horizontal and Vertical Modes:
The mount plate features a quick-locking knob that allows for a 90-degree rotation. Simply unlock the knob, rotate your camera to the desired horizontal or vertical orientation, and then re-lock the knob to secure it in place. This design ensures that the lens optical axis remains consistent, saving time during shoots.
Îndepărtarea lentilelor:
A dedicated lens release button is integrated into the design, making lens removal easy and efficient.
Opțiuni de montare:
The bottom of the mount plate features an Arca-Swiss type quick release plate, allowing for rapid transitions between various accessories such as handles, tripods, and DJI RS-series stabilizers. Additionally, 1/4"-20 and 3/8"-16 threaded holes are available for attaching other quick-release plates or accessories like magic arms.
Organizare de cabluri:
The mount plate adopts a quick-release design with a hand-tightening screw to protect cable interfaces and stabilize signal transmission, ensuring a stable connection for your camera accessories.
7. Întreținere
To ensure the longevity and optimal performance of your SmallRig Horizontal-to-Vertical Mount Plate, follow these maintenance guidelines:
- curatenie: Wipe the mount plate with a soft, dry cloth after each use to remove dust and fingerprints. For stubborn dirt, use a slightly damp cârpă și apoi se usucă bine.
- Evitați substanțele chimice dure: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and materials.
- Depozitare: Store the mount plate in a clean, dry environment away from extreme temperatures and humidity when not in use.
- Inspecţie: Periodically check all screws and moving parts for tightness. Re-tighten if necessary using the provided Allen wrench.
8. Depanare
This section addresses common issues you might encounter with your mount plate.
Issue: Mount plate feels loose or wobbly.
- Soluţie: Ensure that the mount plate is correctly attached to the SmallRig Cage 4422 or Baseplate 4438. Use the provided Allen wrench to check and tighten all fastening screws.
Issue: Difficulty rotating between horizontal and vertical modes.
- Soluţie: Verify that the quick-locking knob is fully disengaged before attempting to rotate. If it's stiff, ensure no debris is obstructing the mechanism.
Issue: Camera buttons or ports are obstructed.
- Soluţie: The mount plate is designed for full access. Double-check that the mount plate is correctly installed and aligned with your camera and compatible SmallRig cage/baseplate. Incorrect installation might lead to minor misalignments.
9. Sfaturi pentru utilizatori
Nu au fost disponibile sfaturi specifice pentru utilizatori de la reviews or Q&A for this product. However, general best practices for camera accessories include:
- Always ensure all connections are secure before operating your camera setup.
- Familiarize yourself with the quick-release mechanisms to maximize efficiency during shoots.
- When attaching to gimbals, ensure proper balancing after installation for optimal performance.
10. Garanție și asistență
Pentru informații despre garanție, asistență tehnică sau solicitări de service, vă rugăm să consultați site-ul oficial SmallRig. website-ul lor web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției pentru orice reclamații în garanție.
