1. Introducere
The ANYCUBIC Kobra 2 Pro is a high-speed FDM (Fused Deposition Modeling) 3D printer designed for efficient and precise printing. Featuring a maximum printing speed of 500mm/s and a recommended speed of 300mm/s, it significantly reduces print times. Equipped with a powerful Cortex-A7 1.2GHz processor, an optimized direct extruder, and an advanced cooling system, it ensures smooth and detailed prints. The LeviQ 2.0 automatic leveling system with smart Z-offset simplifies setup, while the Anycubic APP provides intelligent remote control and monitoring capabilities.
Produs terminatview: Anycubic Kobra 2 Pro 3D Printer in action, highlighting its speed and features.
2. Instrucțiuni de siguranță
- Always operate the printer in a well-ventilated area to avoid inhaling fumes from melting plastics.
- Keep hands clear of moving parts during operation to prevent injury.
- The nozzle and print bed can reach high temperatures. Avoid touching them directly during or immediately after printing.
- Ensure the power supply is correctly connected and grounded. Do not use damaged power cords.
- Keep the printer away from flammable materials, water, and excessive dust.
- Supervise children and pets around the printer.
- Only use recommended filament types and diameters.
- În caz de urgență, deconectați imediat alimentarea cu energie electrică.
3. Conținutul pachetului
Vă rugăm să verificați dacă toate componentele sunt prezente în pachet:
Diagram of the Anycubic Kobra 2 Pro 3D printer's packing list, showing all included components.
- Cadru
- Baza
- Touch screen
- Suport pentru filament
- Cap de imprimare
- Detector de filament
- Cable fixing clip
- Manual de utilizare
- unitate flash USB
- Duză
- M5*45 Screws (4 PCS)
- M5*6 Screws (2 PCS)
- Testing filament
- Set de scule
- M5*14 Screws (1 PC)
- M3*6 Screws (4 PCS)
- Washers (4 PCS)
- Cablu de alimentare
- Unsoare
4. Specificații
Detailed technical specifications for the Anycubic Kobra 2 Pro 3D printer.
| Caracteristică | Caietul de sarcini |
|---|---|
| Tip | FDM/FFF |
| Structura | carteziană |
| Viteza de imprimare | 300mm/s (Typ.), 500mm/s (Max.) |
| Viteză maximă de lucru | ≤ 19.7 in./s / ≤ 500 mm/s |
| Accelerare | 20000 mm/s² |
| Dimensiuni de imprimare | 9.8 x 8.7 x 8.7 in. / 250 x 220 x 220 mm (HWD) |
| Volumul de imprimare | 3.2 gal. / 12.1L |
| Diametrul filamentului | 1.75 mm |
| Filamente compatibile | PLA/TPU/ABS/PETG |
| Diametrul duzei | 0.4 mm (replaceable) |
| Temperatura duzei | ≤ 500°F / 260°C |
| Temperatura patului | ≤ 230°F / 110°C |
| Platforma de imprimare | PEI magnetic spring steel 8.7x8.7in./220x220mm |
| Nivelarea mașinii | New Anycubic LeviQ 2.0 automatic leveling system (25-point) |
| Extruder | Anycubic self-developed direct extruder + double gears |
| Axa X/Y | Double metal spindle |
| X/Y Axis Belt Tensioner | Inclus |
| Axa Z | Double threaded rod |
| Cooling Fan RPM | 7000 rpm |
| Panoul de control | 4.3" LCD touch-control screen |
| De intrare de date | USB ports*3pcs |
| Conectivitate wireless | Bluetooth |
| Procesor | Cortex-A7 1.2GHz |
| Dimensiunile mașinii | 19.1 x 17.1 x 18.2 in. / 486 x 435 x 463 mm (HWD) |
| Greutatea mașinii | 8.4 kg |
| Alimentare electrică | 400W safe power supply |
| Certificare | CE |
| Limbă | engleză |
5. Configurare
5.1 Asamblare
The Anycubic Kobra 2 Pro features an integrated body structure designed for easy assembly. Refer to the included user manual for detailed step-by-step instructions. Key assembly points include:
- Attaching the frame to the base.
- Mounting the print head and filament holder.
- Connecting all necessary cables.
- Adjusting the X/Y-axis belt tensioner using the convenient knob design.
Image illustrating the integrated body structure, touchscreen, magnetic platform, and belt tensioner.
5.2 Initial Power-On and Auto-Leveling
After assembly, connect the power cable and turn on the printer. The Kobra 2 Pro features the LeviQ 2.0 automatic leveling system with Smart Z-Offset. This system intelligently compensates for Z-axis offset, ensuring a perfect first layer. Follow the on-screen prompts on the 4.3-inch LCD touchscreen to initiate the 25-point automatic leveling process.
Visual representation of the LeviQ 2.0 Auto Leveling system and Smart Z-Offset functionality.
Nota: Z-Offset deviation might occur due to the uncontrollable shipping environment. Please adjust the Z-Offset in accordance with the circumstances if needed.
6. Instrucțiuni de utilizare
6.1 Încărcarea filamentului
The printer uses an upgraded direct extruder for efficient and precise filament delivery. Insert the filament into the extruder according to the instructions in the detailed user manual. Ensure the filament is properly seated and ready for printing.
6.2 Pornirea unei imprimări
You can start a print via USB or through the Anycubic APP. Prepare your 3D model using slicing software (e.g., Cura, PrusaSlicer) and save it to a USB flash drive. Insert the USB drive into one of the printer's USB ports and select your model from the touchscreen interface. Alternatively, use the Anycubic APP for online slicing and printing.
Graphic illustrating the 10X speed boost with 300mm/s standard and 500mm/s maximum printing speed.
6.3 Anycubic APP Control
For intelligent control, upgrade your printer firmware to version 3.0.5 or above. The Anycubic APP offers a range of features:
- Online model library search.
- Real-time video supervision and status monitoring (requires user-provided camera).
- Online slicing and printing.
- Înregistrare time-lapse.
- Remote control and management.
Screenshot of the Anycubic APP interface for intelligent control and monitoring.
6.4 Îndepărtarea modelului
The printer features a PEI magnetic spring steel platform, which allows for easy removal of finished models. Simply bend the flexible plate slightly to detach your print.
7. Întreținere
7.1 Curățare generală
- Regularly clean the print bed with isopropyl alcohol to ensure good adhesion.
- Keep the printer free of dust and filament debris. Use a soft brush or compressed air.
- Inspect the X/Y/Z axes for any obstructions or wear.
7.2 Îngrijirea duzei
High-temperature printing can accelerate the aging of the nozzle tube. If you experience nozzle clogs during prolonged use, promptly inspect the tube for blockages or wear and replace if necessary.
7.3 Ungerea
Apply a small amount of the provided grease to the moving parts, such as the Z-axis threaded rods, periodically to ensure smooth operation.
8. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Poor first layer adhesion / Z-Offset issues | Incorrect Z-Offset calibration, dirty print bed. | Perform LeviQ 2.0 auto-leveling. Manually adjust Z-Offset if needed. Clean the print bed with isopropyl alcohol. |
| Vibration lines or bracket lines in prints | Resonance during printing. | Utilize the one-click vibration compensation feature. |
| Filamentul nu se extrudează / Duză înfundată | Nozzle blockage, incorrect temperature, filament tangle. | Inspect and clean the nozzle. Check filament path and ensure proper temperature settings. The printer is equipped with material breakage detection. |
| QR code for setup/app not scanning | Poor lighting, damaged QR code, outdated app version. | Ensure good lighting. Try manually entering information if available. Update the Anycubic APP to the latest version. |
| Cannot print via Wi-Fi without internet | Anycubic APP requires internet connectivity for some features. | The Anycubic APP supports remote networking and online slicing/printing, which typically requires internet access. For offline printing, use a USB flash drive. |
9. Sfaturi pentru utilizatori
- Actualizarea firmware-ului: To access all smart features, ensure your printer firmware is upgraded to version 3.0.5 or above.
- Monitorizare video: If you wish to use the video monitoring functionality via the Anycubic APP, you will need to prepare and connect your own camera.
- Filament Spools: While a small amount of 'testing filament' is often included, it may not be a full spool. Plan to purchase additional filament for your projects.
- Calitate imprimare: The printer's vibration compensation and flow control features are designed to enhance print quality. Experiment with these settings to achieve optimal results for different models.
10. Garanție și asistență
For warranty information, technical support, or service inquiries, please refer to the official Anycubic website-ul lor web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției pentru reclamațiile în garanție.
