Manual de utilizare pentru pornirea auto YABER 4000A 26800mAh

1. Introducere

Thank you for choosing the YABER Car Jump Starter. This device is designed to provide a reliable solution for starting your vehicle's battery, acting as a powerful power bank, and offering emergency lighting. This manual will guide you through the proper use, maintenance, and safety precautions to ensure optimal performance and longevity of your jump starter.

Having this device in your car's trunk provides peace of mind, ensuring you can start your car and get home without waiting for roadside assistance, especially when facing issues like a battery left unused for too long or low temperatures affecting battery performance.

Common scenarios where the YABER Jump Starter is essential.

2. Avertismente importante de siguranță

Vă rugăm să citiți și să înțelegeți toate informațiile de siguranță înainte de a utiliza acest produs. Nerespectarea acestor instrucțiuni poate duce la electrocutare, incendiu sau vătămări corporale grave.

Smart Clamps Protection Features:

The YABER Jump Starter is equipped with smart clamps that incorporate multiple protection mechanisms to ensure safe operation:

• Protectie la temperatura ridicata: Previne supraîncălzirea în timpul funcționării.
• Protecția conexiunii inverse: Alertează și previne deteriorarea în caz de umflareampsunt conectate incorect.
• Protecție la supracurent: Măsuri de siguranță împotriva fluxului excesiv de curent.
• Protecție împotriva taxării inverse: Previne curgerea curentului înapoi în demaror de la bateria vehiculului.
• Protecție polaritate inversă: Asigură conectarea cu polaritate corectă.
• Protecție peste descărcare: Protejează bateria internă de descărcarea profundă.
• Protecție la supraîncărcare: Prevents overcharging of the internal battery.
• Protecție la scurtcircuit: Se oprește automat în caz de scurtcircuit.

Deșteptul clamps provide multiple layers of safety.

Visual representation of the smart clamp protection features.

Măsuri generale de siguranță:

• Nu scufundați produsul în apă.
• Nu utilizați produsul în atmosfere explozive, cum ar fi în prezența lichidelor, gazelor sau prafului inflamabile.
• Nu modificați sau dezasamblați produsul.
• A nu se lăsa la îndemâna copiilor.
• Folosiți doar clapeta inteligentă furnizatăampși cabluri.

3. Conținutul pachetului

Vă rugăm să verificați pachetul pentru următoarele articole:

• Car Jump Starter (YA40) x 1
• Protective Smart Clamps (Red = positive; Black = negative) x 1
• Cablu USB tip C x 1
• Inflator Hose x 1 (if applicable to your model variant)
• Manual de utilizare x 1
• Cutie de depozitare x 1

The YABER Jump Starter and its included accessories.

4. Caracteristicile produsului

The YABER Car Jump Starter is a versatile device offering multiple functionalities:

• Aprindere puternică: Delivers 4000A peak current, capable of starting all 12V gasoline engines and up to 10.0L diesel engines.
• Baterie externă de mare capacitate: Features a 26800mAh battery capacity with two USB outputs (5V/2.4A, 9V/2A) and a USB-C input (5V/9V 2A) for fast charging of mobile devices.
• Ieșire CC 12V/10A: Provides power for various 12V accessories.
• Lumină LED de urgență: Integrated flashlight with 3 modes: Illumination (Normal), Strobe, and SOS for emergency situations.
• Funcționare la temperaturi extreme: Designed to work reliably in temperatures ranging from -20℃ to +60℃ (-4°F to 140°F).
• Smart Clamps: Equipped with multiple safety protections as detailed in the Safety Warnings section.

Pesteview of the YABER Jump Starter's multi-functional capabilities.

5. Specificații

The jump starter is designed for reliable performance in a wide range of temperatures.

6. Configurare și încărcare inițială

Before first use, ensure the jump starter is fully charged. It is recommended to fully charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided Type-C USB cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB wall adapter (not included) or a powered USB port.
3. The digital display on the jump starter will show the charging progress. Charge until the display shows 100%.

The device supports two-way fast charging, allowing for quick recharging of the unit itself.

7. Instrucțiuni de utilizare

7.1. Pornirea asistată a unui vehicul

Asigurați-vă că demarorul este încărcat la cel puțin 50% înainte de a încerca să porniți asistat un vehicul.

1. Introduce: Conectați smart clamp cable into the jump starter's 12V jump start port. Ensure it is fully inserted.
2. Conectare: Atașați cl. roșu (+).amp to the positive terminal of your vehicle's battery and the black (-) clamp la borna negativă. Clapeta inteligentăamps will indicate if the connection is correct.
3. Început: Start your car's engine. If it doesn't start immediately, wait 20-30 seconds and try again. Do not crank for more than 3 seconds per attempt.
4. Elimina: Once the car starts, immediately remove the smart clampde la bateria mașinii, apoi deconectați dispozitivul inteligent de la prizăamp cablul de la demarorul de asistare.

Visual guide for the jump starting process.

The YABER Jump Starter is suitable for a wide range of 12V vehicles.

7.2. Utilizarea ca baterie externă

The jump starter can charge your electronic devices via its USB output ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-1 or USB-2).
2. Starterul va începe automat încărcarea dispozitivului.
3. Afișajul digital va afișa procentul de baterie rămasătage.

Charging multiple devices simultaneously with the power bank function.

7.3. Using the LED Emergency Light

The built-in LED light has three modes: Illumination (normal flashlight), Strobe, and SOS.

1. Press and hold the power button for approximately 3 seconds to turn on the Illumination mode.
2. Press the power button briefly to cycle through the modes: Illumination > Strobe > SOS.
3. Press and hold the power button again for 3 seconds to turn off the light.

The LED light provides versatile illumination for various situations.

Detaliat view of the LED emergency light modes.

8. Întreținere și depozitare

• Încărcare: Reîncărcați demarorul la fiecare 3-6 luni, chiar dacă nu este utilizat, pentru a prelungi durata de viață a bateriei.
• curatenie: Use a dry, soft cloth to clean the device. Do not use harsh chemicals or abrasive materials.
• Depozitare: Store the device in a cool, dry place away from direct sunlight, heat sources, and moisture. Keep it in its protective storage box when not in use.
• Temperatură: Avoid storing the device in environments outside its operating temperature range (-20℃ to +60℃).

9. Depanare

Dispozitivul nu se va porni:

• Ensure the device is charged. Connect it to a power source using the Type-C cable.

Vehicle will not jump start:

• Verificați dacă clema inteligentăamp cablul este introdus complet în demarorul de asistență.
• Ensure the red (+) and black (-) clamps are connected correctly to the vehicle battery terminals. The smart clamps should indicate a correct connection.
• Verify that the jump starter has sufficient charge (at least 50%).
• If the vehicle battery is completely dead, it may take a few attempts. Wait 20-30 seconds between attempts.
• Dacă clema inteligentăamps show an error, refer to the smart clamp's indicator guide (if available) or disconnect and reconnect carefully.

Dispozitivele nu se încarcă de la bateria externă:

• Asigurați-vă că demarorul are suficientă încărcare.
• Check that the USB cable is securely connected to both the jump starter and your device.
• Încercați un alt cablu sau port USB.

10. Sfaturi pentru utilizatori

• Always keep the jump starter charged, especially before long trips or during winter months when car batteries are more prone to failure.
• Familiarize yourself with the smart clamp indicators. They are designed to provide immediate feedback on connection status and potential issues.
• When jump starting, ensure your vehicle's ignition is off before connecting the clamps.
• After a successful jump start, allow your car's engine to run for a few minutes to recharge its battery before turning it off.

11. Garanție și asistență

YABER products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact YABER customer service through the official website-ul sau punctul dvs. de vânzare.

Vă rugăm să păstrați dovada achiziției pentru cererile de garanție.

12. Întrebări frecvente (FAQ)

Q: What power does the device charge? Is it 110V or 220V?

A: The YABER Jump Starter charges via a USB-C input (5V/2A, 9V/2A). You can use any standard USB wall adapter (110V or 220V compatible) with a USB-C output to charge the device. The jump starter itself does not have a direct 110V or 220V input.

Q: Is the product new and does it come with a warranty?

A: Yes, all new YABER products are sold with a manufacturer's warranty. Please refer to the 'Warranty and Support' section for more details.