Manuale+

S4A SA-0103

Manual de utilizare pentru tastatura metalică RFID S4A SA-0103 pentru controlul accesului

Electronic Lock System with Keychains and Waterproof Rainproof Cover

1. Introducere

Thank you for choosing the S4A RFID Metal Access Control Keypad (Model SA-0103). This device provides a secure and convenient solution for managing access to your premises. Featuring a robust metal construction, support for RFID keytags/cards, and PIN code entry, it is designed for reliable operation. When installed outdoors, the included rainproof cover offers additional protection against environmental elements. This manual will guide you through the installation, operation, and maintenance of your access control system.

2. Specificații

Keypad Specifications
CaracteristicăDescriere
Nume de marcăS4A
Numărul de modelSA-0103
Dimensiune120 mm x 56 mm x 18 mm
Lucrare VoltageDC 12V
Curentul static≤30mA
Gama de lectură3 cm ~ 8 cm
Capacitate2000 de utilizatori
Temperatura ambiantă-25°C ~ 60°C
Umiditatea mediului ambiant10% ~ 90%
Ieșire blocare electrică≤3A
Ieșire de alarmă≤20A
Output Short Circuit Protection Time≤100μS
Ora deschisă0 ~ 99 seconds (adjustable)

Rainproof Housing Dimensions:

  • Outer size: 150mm x 104mm x 90mm
  • Inner size: 135mm x 89mm x 84mm
Dimensions of the S4A SA-0103 access control keypad, showing a height of 120mm and width of 56mm.
Figure 2.1: Keypad Dimensions
Table of detailed specifications for the Zinc Alloy Standalone access controller, including size, voltage, current, reading range, user capacity, temperature, humidity, and output ratings.
Figura 2.2: Specificații tehnice detaliate
Dimensions of the rainproof housing, showing outer dimensions of 150mm height, 104mm width, and 90mm depth, and inner dimensions of 135mm height, 89mm width, and 84mm depth.
Figure 2.3: Rainproof Housing Dimensions

3. Conținutul pachetului

Your S4A RFID Metal Access Control Keypad package typically includes the following items:

  • 1x S4A RFID Metal Access Control Keypad (Model SA-0103)
  • 7x RFID Keytags or Thin Cards (quantity and type may vary based on purchase option)
  • 1x Rainproof Housing (for outdoor installation)
  • Șuruburi de montare și dibluri de perete
  • Manual de utilizare (acest document)
Image showing the S4A SA-0103 keypad, seven blue RFID keytags, and a black rainproof housing, indicating a complete kit.
Figure 3.1: Typical Package Contents with RFID Keytags and Rainproof Cover
Image showing the S4A SA-0103 keypad, seven white RFID thin cards, and a black rainproof housing, indicating a complete kit.
Figure 3.2: Typical Package Contents with RFID Thin Cards and Rainproof Cover

4. Produs terminatview

The SA-0103 access control keypad is designed for durability and ease of use. Its metal casing provides enhanced security and longevity. The keypad features backlit buttons for visibility in low-light conditions, and LED indicators to show the system's status. A built-in doorbell function adds convenience.

A închide view of the S4A SA-0103 keypad, highlighting the LED indicator, status LED, program keypad, doorbell button, and screws for fixing.
Figure 4.1: Keypad Features and Components
Video 4.1: S4A Metal Keypad Product Showcase

5. Configurare și instalare

Proper installation is crucial for the optimal performance and security of your access control system. It is recommended that installation be performed by a qualified technician.

5.1. Montarea tastaturii

  1. Choose a suitable mounting location near the door, ensuring it is easily accessible and within reach of necessary wiring.
  2. If installing outdoors, first mount the rainproof housing. The keypad is surface waterproof, but the housing provides additional protection against direct rain and harsh weather.
  3. Use the keypad dimensions (120mm x 56mm) and the rainproof housing dimensions (150mm x 104mm) as a guide for placement.
  4. Mark the drilling points on the wall using the keypad's backplate as a template.
  5. Dați găuri și introduceți dibluri de perete, dacă este necesar.
  6. Fixați tastatura pe perete folosind șuruburile furnizate.
S4A SA-0103 keypad installed on an outdoor wall next to a door, demonstrating a typical installation scenario.
Figura 5.1: Example Outdoor Installation of Keypad
S4A SA-0103 keypad installed on a brick wall next to a door, showing another typical outdoor installation.
Figure 5.2: Keypad Installed on a Brick Wall

5.2. Schema de cablare

The keypad requires a DC 12V power supply and connects to an electric lock, an exit button, and optionally a doorbell. Follow the wiring diagrams carefully.

Basic wiring diagram for the S4A SA-0103 access control system, showing connections between a power supply, the SA-0103 keypad, an electric lock, and an exit button.
Figure 5.3: Basic Wiring Diagram
Detailed wiring diagram for the S4A SA-0103 access control system, illustrating connections for power supply, keypad, doorbell, exit button, and various electric lock types (NO/NC).
Figura 5.4: Schemă detaliată de cablare

Conexiuni cablare:

  • +12V și GND: Connect to a stable DC 12V power supply.
  • BLOCARE: Connect to the electric lock. Ensure compatibility with your lock type (Normally Open - NO or Normally Closed - NC).
  • REX/BL: Connect to the exit button.
  • BELL1 and BELL2: Connect to an external doorbell.
  • AUX_IN and AUX_OUT: Auxiliary input/output for advanced functions (refer to specific programming instructions for details).
  • COM, NU, NC: These terminals are for connecting various types of electric locks. COM is common, NO (Normally Open) means the circuit is open when the lock is de-energized, and NC (Normally Closed) means the circuit is closed when the lock is de-energized. Choose the appropriate connection based on your lock's requirements.

Warning: Incorrect wiring can damage the device or connected components. Always ensure power is disconnected before performing any wiring.

6. Instrucțiuni de utilizare

The SA-0103 keypad supports multiple access methods and programming options.

6.1. Operare de bază

  • Access with RFID: Present a programmed RFID keytag or card to the keypad. The door will unlock for the set open time.
  • Access with PIN: Enter your programmed PIN code followed by the '#' key. The door will unlock for the set open time.
  • Funcția soneriei: Press the bell icon button on the keypad to activate the connected doorbell.

6.2. Modul de programare

To enter programming mode, you typically need to enter a master code. The default master code is often 123456 or 999999, but please refer to the specific programming guide that came with your unit for the exact default code and programming steps.

General Programming Steps (may vary slightly):

  1. Intrați în modul de programare: Introduceți Codul Principal, apoi apăsați #. The LED indicator will change (e.g., from red to green or flash).
  2. Add User (RFID Card/Keytag):
    1. While in programming mode, enter the command for adding a user (e.g., 1).
    2. Present the new RFID card/keytag la tastatură.
    3. The keypad will beep to confirm successful addition.
  3. Add User (PIN Code):
    1. While in programming mode, enter the command for adding a user (e.g., 2).
    2. Enter the desired PIN code (4-6 digits), then press #.
    3. Re-enter the PIN code, then press # din nou pentru a confirma.
    4. The keypad will beep to confirm successful addition.
  4. Șterge utilizator:
    1. While in programming mode, enter the command for deleting a user (e.g., 3).
    2. To delete by RFID: Present the RFID card/keytag să fie șters.
    3. To delete by PIN: Enter the PIN code to be deleted, then press #.
    4. The keypad will beep to confirm deletion.
  5. Schimbare cod principal:
    1. While in programming mode, enter the command for changing the master code (e.g., 8).
    2. Enter the new Master Code, then press #.
    3. Re-enter the new Master Code, then press # din nou pentru a confirma.
  6. Adjust Open Time:
    1. While in programming mode, enter the command for adjusting open time (e.g., 9).
    2. Enter the desired open time in seconds (0-99), then press #.
  7. Ieșiți din modul de programare: Presa * or wait for a timeout.

Note: Always refer to the specific programming instructions provided with your device for exact commands and sequences.

7. Întreținere

  • curatenie: Ștergeți suprafața tastaturii cu o lavetă moale șiamp Evitați utilizarea de produse de curățare abrazive sau solvenți, deoarece acestea pot deteriora finisajul și componentele electronice.
  • Protecție în exterior: If installed outdoors, regularly check that the rainproof cover is securely in place and free from cracks or damage. Ensure no water can accumulate around the keypad.
  • Inspecția cablajului: Verificați periodic toate conexiunile cablurilor pentru a vă asigura că sunt sigure și fără coroziune sau deteriorări.
  • Verificarea funcționalității: Test the keypad's functionality (RFID, PIN, doorbell, exit button) regularly to ensure it is operating correctly.

8. Depanare

  • Tastatura nu răspunde: Check the power supply connection. Ensure the DC 12V power adapter is functioning and properly connected to the keypad's +12V and GND terminals.
  • Door does not unlock after valid entry:
    • Verify that the user's RFID card/PIN is correctly programmed.
    • Check the wiring to the electric lock. Ensure it matches the lock type (NO/NC) and is securely connected.
    • Confirm the 'Open Time' setting is not set to 0 or an extremely short duration.
  • RFID card/keytag is not being read: Ensure the card is presented within the 3-8cm reading range. Check if the card is damaged or if it's a compatible type.
  • Doorbell button does not work: Inspect the wiring to the external doorbell (BELL1 and BELL2 terminals). Ensure the doorbell itself is functional.
  • Keypad beeps continuously or shows an error: This may indicate a tamper alarm or a system error. Refer to the specific programming guide for error codes or reset procedures. Disconnecting and reconnecting power can sometimes resolve temporary glitches.
  • Keypad is not backlit: Check power supply and wiring. If the issue persists, there might be an internal fault.

9. Sfaturi pentru utilizatori

  • Secure Your Master Code: Always change the default master code immediately after installation and keep the new code in a secure, memorable location.
  • Protecție în exterior: For outdoor installations, even though the keypad is surface waterproof, always utilize the provided rainproof cover. This significantly extends the lifespan of the device by protecting it from direct exposure to rain and harsh weather conditions.
  • Testați în mod regulat: Periodically test all access methods (RFID, PIN) and the exit button to ensure the system is functioning as expected.
  • Acces la copii de rezervă: Consider having a backup method of entry in case of power failure or system malfunction.

10. Garanție și asistență

This S4A RFID Metal Access Control Keypad comes with a 2-year guarantee, ensuring quality and reliability. For technical assistance, troubleshooting beyond this manual, or to inquire about warranty claims, please contact your original vendor or the S4A customer support channel.

Documente conexe - SA-0103

Preview Sistem inteligent automat pentru uși plate: Ghid de instalare și utilizare
Ghid complet pentru sistemul inteligent automat pentru uși plate S4A, care detaliază specificațiile tehnice, descrierile accesoriilor, procedurile de instalare mecanică și electrică, ajustările parametrilor și asigurarea calității produsului.
Preview Catalogul de produse S4A: Sisteme de control al accesului și încuietori electromagnetice
Explorați catalogul complet de produse S4A, care include o gamă largă de sisteme de control al accesului, încuietori electromagnetice, încuietori wireless pentru uși, cititoare de amprente și operatoare automate pentru uși. Descoperiți soluții inovatoare de securitate pentru diverse aplicații.
Preview S4A 1CH Tuya WiFi Relay Module: 7-32V Single Channel Smart Switch
Discover the S4A 1CH Tuya WiFi Relay Module, a versatile single-channel switch supporting 7-32V input. This module enables wireless control of electrical devices via WiFi, featuring a 10A output, micro USB or DC input, and compatibility with the Tuya platform for smart home automation.
Preview CS SA-32 Access Control System - Reference and Installation Manual
Comprehensive reference and installation manual for the CS SA-32 access control system. Covers product presentation, technical specifications, installation, programming, master cards, security modes, factory reset, and warranty information. Details user access management via RFID cards and passwords.
Preview Manual de instrucțiuni pentru seiful de securitate Sanctuary Diamond | Modele SA-DIA1, SA-DIA2, SA-DIA3
Manual de instrucțiuni complet pentru seifurile de securitate Sanctuary Diamond, inclusiv modelele SA-DIA1, SA-DIA2, SA-DIA3, SA-DIA1-D, SA-DIA2-D și SA-DIA3-D. Acoperă configurarea, programarea încuietorii electronice, funcționarea, caracteristicile de securitate și garanția pe viață.
Preview Illustra Pro Gen3 Series: Installation and Configuration Guide
This guide provides comprehensive instructions for the installation and configuration of Illustra Pro Gen3 Series security cameras, covering setup, network connectivity, security features, and advanced operational settings.